What Did You Use Your Multitool For Today?
-
I used my swisstools wood saw to remove some overhanging tree branches at my father in laws house. The Swisstool did a faultless job.

-
Used my Swisstool to repair my sons bike , the wheel nuts had come loose and the chair had come off.
The Swisstool pliers did a fine job on the wheel nuts. -
used my PST to help remove an Astro XTL 5000 radio from a fire truck
-
Used my Spirit and Pioneer to help fit a towel rail in the bathroom:
<a href="https://flic.kr/p/uiScxM" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/426/18580164383_11ed34e400_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
(Used the file to take a chunk out of my index finger at the same time too ::) )
-
Back at my in-laws, I was putting together a guest bed that they bought at Ikea. ST300 provided a blade to open all the packaging, phillips and flat drivers, hex bit w/ adapter, pliers, and even pounded in little plastic dowels. No pictures, but I did have a nice chat with my father-in-law about why he needs one ;)
-
Riding by bike home from work earlier, one of the pedals nearly fell off! >:( The nut holding the arm to the bike had worked itself almost completely off. My MP600's pliers got it tight enough to make it home and to a socket set.

-
Used my Wave a million times opening boxes and assembling a Canon copier. Those machines have way to many pieces. [emoji20]
-
Used my Blast today to unscrew the cable, cable from the receiver and the wall. Don't know why it was on so tight.
-
I used the nail file on my Vic Executive yesterday evening to file down some mold flashing where the parts were cut from the parts trees on an RC truck with my son last night. Shock pistons with flashing = fail.
I find myself using nail files for plastics and soft metals more than fingernails. (or toenails, hehehe)
-
You know that thing where every now and then you get a call from a friend in need, and have to go help do a crappy job?
My friends' house got flooded with about 6" of water in their basement from a recent heavy rain. We had to go help with the clean-up. The floor was covered in about a quarter inch of silt and maybe a hundred pounds of leaves. Most of the work was sweeping and mopping, but my Explorer got a good workout, including...
Cutting open packages of new mops, rubber gloves, etc. Cutting a garden hose. Using the hook to pull up the drain cover to get the last of the nasty washed down the drain. The scissor blades then got to help remove mud from under my fingernails. Once cleaned up, the small blade got to help open a sushi package.
And... the philips helped tighten up a loose armrest on my friends' chair while we enjoyed some adult beverages for a job well done.
-
I used my Swiss Tool Spirit X to put a grill together for the weekend festivities. Rebar did help a little in the action too.
Sent from my iPhone using Tapatalk
-
I noticed my apple tree was starting to buckle on certain branches under the weight of the still forming apples. It's not a huge crop, just a fairly young tree. I grabbed some string and some soft coated gardening wire to tie all the branches in so they are helping to support each other. I don't know how well this will go as there's still a couple of months till they're liable to be ready, and this is the first time the tree has had fruit (only four years old).
It was a Sideclip that cut the wire and string
-
I disassembled and reassembled my Waltham model 1883 twice, using the micro screwdriver and chisel on my Swisschamp, and why I don't quite know! Boredom, possibly?!
Sent from my iPhone using A box of monkeys on a treadmill and a quantum leap
-
I had just drilled a hole in the leg socket of a Weber kettle grill. But the hole turned out to be a bit small for the first screw I tried, and I twisted the head off with the impact driver.
I used the pliers on the Victorinox CyberTool 34 to back the rest of the screw out.
I also use the small blade to mark a few points on an old oak broom handle for where I would cut if off with a jigsaw. I was planning to make new handles for the grill, as the old wood ones were rotted out. Didn't get too far though, as the steaks were done first. Come to think of it, I could've used the pen to do that marking...

<a href="http://s134.photobucket.com/user/jzorns/media/Knives/image_zps1g9osgpw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zps1g9osgpw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s134.photobucket.com/user/jzorns/media/Knives/image_zpswsypkm4l.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpswsypkm4l.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Spirit X
Knife to unpack new kitchen appliances (fridge, freezer, and slow cooker)
Phillips screwdriver to reverse freezer door (can opener to prise off blanking plugs)
Pliers to cut moulded plug off washing machine, and plug and a length of flex from an extension lead.Correction: I used dedicated pliers here
Wire stripper on chisel and small screwdriver to connect the two (extending the cable)
Phillips and small screwdriver to remove and refit a plug on the fridge after routing the cable through to a switched fused spur.
Awl to scribe a section of laminate flooring to be chopped out
Bottle opener for accessing a well deserved beer -
I used my Huntsman, Style CS, and Opinel No.9 to cut a universal screen protector down to size. A team effort! :D
Sent from my SM-T700 using Tapatalk
-
With my new Leatherman Rebar, I
**Cut a cable:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpspocttjqy.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpspocttjqy.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Squished it round again; it flattened a bit when I cut it:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsycrxvyml.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsycrxvyml.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Used the knife to strip the jacket and cut the strings:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsxtuepjnm.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsxtuepjnm.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Used the hard wire cutter to strip the individual strands:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsbfaqlavr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsbfaqlavr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Ready for connection!**
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsxb8evjik.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsxb8evjik.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Is it me, or is the wire stripping notch in the LM can opener 94% useless?
-
Wouldn't cutting the insulation be easier with the notch on the can opener?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
