How sharp is sharp for your multitool?
-
If I sharpen my knives as often as I do I might sharpen it to nothing. How long do you reckon a multitool knife would last if I sharpen it once a week?
-
@duckman1975 said:
If I sharpen my knives as often as I do I might sharpen it to nothing. How long do you reckon a multitool knife would last if I sharpen it once a week?I think that would totally depend on what you're using. If you used an electronic one, it would probably not last real long. Sandpaper might eat a blade too. On a real sharpening stone I think it would last a long time. And using a ceramic sharpener like the Sharpmaker, especially the white stones, it would probably be a very long time till you sharpened much of your blade away.
-
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.
-
@duckman1975 said:
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.??? All four steps are ceramic. Unless you mean you'll do the white ones only, yes that's what I do for touchups.
-
An inexpensive alternative to stones is silicon carbide sandpaper. A piece of silicon carbide (also called wet or dry) sandpaper glued to a wooden block will work as well as a stone. Wet or dry sandpaper on plate glass is popular with woodworkers. This method is called Scary Sharp.
-
I sharpen them till they can shave the hair on my arm, then strop the blade either on the palm of my hand, or on a belt or mouse mat everytime I use the blade :)
-
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.
??? All four steps are ceramic. Unless you mean you'll do the white ones only, yes that's what I do for touchups.
Step 1 and 2 brown ones step three and four white ones. looks like the brown ones wears away more than the white.
-
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.
??? All four steps are ceramic. Unless you mean you'll do the white ones only, yes that's what I do for touchups.
Step 1 and 2 brown ones step three and four white ones. looks like the brown ones wears away more than the white.
Yep they do, because the brown one's are quite a bit courser :)
-
another method I heard was to use leather strips, its time consuming but makes knife really sharp.
-
@micky d said:
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.
??? All four steps are ceramic. Unless you mean you'll do the white ones only, yes that's what I do for touchups.
Step 1 and 2 brown ones step three and four white ones. looks like the brown ones wears away more than the white.
Yep they do, because the brown one's are quite a bit courser :)
can you buy just the brown ones?
-
@duckman1975 said:
another method I heard was to use leather strips, its time consuming but makes knife really sharp.But your only using the belt to maintain the edge :), do 50 strokes (25 each side) it only takes about a minute :)
-
@micky d said:
[quote author=duckman1975 link=topic=6269.msg111468#msg111468 date=1219191114]
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.??? All four steps are ceramic. Unless you mean you'll do the white ones only, yes that's what I do for touchups.
Step 1 and 2 brown ones step three and four white ones. looks like the brown ones wears away more than the white.
Yep they do, because the brown one's are quite a bit courser :)
can you buy just the brown ones?
[/quote]You can yes, as there easily broken if droped :oYou can also get diamond extra course one's which I've got, and some extra fine one's that I want

-
@micky d said:
@micky d said:
[quote author=jzmtl link=topic=6269.msg111473#msg111473 date=1219192105]
[quote author=duckman1975 link=topic=6269.msg111468#msg111468 date=1219191114]
I also use the sharpmaker but I always follow steps one to four, guess I could just do the ceramic part only. thanks again I'm new at shapning.??? All four steps are ceramic. Unless you mean you'll do the white ones only, yes that's what I do for touchups.
Step 1 and 2 brown ones step three and four white ones. looks like the brown ones wears away more than the white.
Yep they do, because the brown one's are quite a bit courser :)
can you buy just the brown ones?
[/quote]You can yes, as there easily broken if droped :oYou can also get diamond extra course one's which I've got, and some extra fine one's that I want

[/quote]And they say diamond is women's bestfriend! :D
-
:D :D
-
The diamond stone is only necessary for reprofiling, or repair very badly damaged edge. I don't think the super fine is really necessary either, you can get hair splitting sharpness with the fine stone already.
In my other thread on splitting hair, both knives are finished with the fine stone (which is equivelent of 1200 grit sand paper).
-
you can sharpen with almost any fine materials the problem is the consistency of the angle, thats why I can't sharpen anything without the sharpmaker. Wish I could be like the guy on youtube who can sharpen a knife razor sharp using a fine finished concrete wall.
-
@duckman1975 said:
you can sharpen with almost any fine materials the problem is the consistency of the angle, thats why I can't sharpen anything without the sharpmaker. Wish I could be like the guy on youtube who can sharpen a knife razor sharp using a fine finished concrete wall.It just takes practice, or someone to teach you one on one :)
What about that bloke near you who makes swords, could he take you through the motions ???
-
Shaving sharp for me , on all my multitools .Just a few passes on the white Sharpmaker stones keeps them like it .
Dunc
-
I try to keep my Leatherman's plain edge pretty sharp but it doesn't happen too often. It's my beater blade. I'll get it nice and sharp and then use it to cut up a bunch of shingles or use it to cut up a bunch of bait on a pile of rocks. That thing takes it's toll on the edge...

The serrated blade is always kept sharp and clean as I use it primarily as my "food" knife. Those times when a sub sandwich needs cut in half and I'm sitting in the middle of a lake on a boat. Or when I'm at work and eating lunch the serrated blade does kitchen duty. I always carry a dedicated pocket knife that is kept in top shape for all other cutting chores.
-
If you're sharpening once a week and not actually damaging the blade between sharpenings, I would suggest you purchase a strop and use it regularly. Most of the time when you sharpen a blade, it doesn't need to have metal removed. Most of the time the "rolled" edge just needs to be straightened back out. This is what a strop is for. If you strop regularly, you should only need to use stones to remove metal if the edge is nicked or otherwise damaged.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login