What did you use your Sak on today?
-
I used the toothpick in my Clockwork Classic. (<-- I love saying "Clockwork Classic")
Just used the screwdriver tip on the nail file to take out a staple without butchering the paper or poking a staple tip into that tender skin beneath my fingernail. :)
-
Yeah, that little 58mm bottle opener/Philips tool is spectacular. When I saw it in pictures, it looked too small to be effective at popping tops, I thought it would take multiple tries to get it off. When my manager arrived in the mail, I tried it out, and to my delight, it could pop caps in a single go, every time!
Not only opening bottles and #1 Phillips', but if you try it on a #2 Phillips that isn't super-tight, you'll be blown away by how well it works.
The combo tool in the 58mm Vics is a masterpiece.
The one in the small Wengers was good too. The tip isn't a proper Phillips, but is just the right size to fit into a #2, and works on smallish flat heads too.
That Philips rocks out on #0 and I think #00 heads as well. And the magnetized tip is doubly helpful on those tiny screws. Truly a masterpiece of engineering.
-
I had to use two SAKs today.
First of all, using my Craftsman I had to use the scissors to cut weed eater string to the right size, and then the saw to cut down some saplings.
I
I changed into my shorts later while relaxing afterwards, and a large bulky model like the Craftsman can be uncomfortable. I left the Craftsman in the belt pouch on my jeans. I put my little Wenger MicroLight Esquire in my shorts pocket. I used the blade to open freezer pops. It might have a puny blade, but the blade is sharp! -
I've been using the bottle opener this morning to open up a few thousand partially sealed envelopes. They were put through a printer to get addresses printed on them, and the heat apparently caused the glue to stick a bit. They need to be opened to have a notice inserted by running through our folding/inserting machine.

Sent from my XT901 using Tapatalk
-
@Smaug said:
Petar, I love that paracord scorpion!I'll tell you what: If you send me that paracord scorpion (or a similar one) I'll send you a SAK and also a bonus gift worth about about 10X as much as the SAK as a warm welcome gift to the forum. I will have a hand-made souvenir from my friend in Bulgaria, and you will have another nice SAK and a cool thing from your friend from Chicago.
Also, please don't be self-conscious about your English. To many of us, English is our mother language. We are lucky enough that this forum is also in English. But at the same time, we really like the variety that comes from having members from all over the world. Your English is good enough that we get your meaning easily, and that is good enough.
Some people grew UP speaking English, and cannot be bothered to speak it correctly. By comparison, you are trying hard.
PS - the edge of the Victorinox reamers are a little sharp; careful you don't nick the sheath of the paracord! Now, I can see why you want the sailing SAK with the marlin spike, hehehe.
Hi i love your idea . give me on a personal message your info and i will do my best to send it to you :)
-
Today i use my tweezers to get out (hmmm i dont know how is in english , i drill one metal detail then one veryy microscopic metal scrap stuck into my fingers) so i get it out .After work i use my bottle opener and can opener and put some shoping bags on it and use it like a holder (i see this idea here) so i try it and its very comfortable to hold the bags that way :)
-
@PetarAt said:
Today i use my tweezers to get out (hmmm i dont know how is in english , i drill one metal detail then one veryy microscopic metal scrap stuck into my fingers) so i get it out .After work i use my bottle opener and can opener and put some shoping bags on it and use it like a holder (i see this idea here) so i try it and its very comfortable to hold the bags that way :)Interesting sounding method of holding shopping bags. But I can't quite picture how it works. Can you or anyone else post a picture of this method?
-
I used my Recruit to MacGyver a tire patch for my son's bike innertube. I used super glue and a rubber band. 24 hrs later, it's still holding air!
-
The Jedi Pioneersaber made short work of a couple of Orangetroopers....

-
Haha awesome
-
Thank you!!! :D
-
Making lunch at work
-
Last night me and my 08 soldier had a date with Samuel Adams.

-
Used the small blade on my Super Tinker to open a new shower head.
-
The Bantam can/bottle opener to undo a screw to take off some curtains
-
I ended up using the farmer, cause I've been tired of these branches draped over the sidewalk, and having to duck everytime. so I just broke out the saw and cut them off, now they lay to the side, so let's see how long they stay there..
JR -
I was trying to strip the jacketing off of a cable of signal level wiring. The jacket material was designed to be abrasive-resistant, but I could NOT strip it with a proper dedicated wire stripper.
Out came the razor sharp blade of my Wenger Pocket Toolchest. I lightly cut a ring around the cable and it pulled right off. Thankfully, the tiny (24 AWG?) wires inside the cable had regular thermoplastic insulation instead of that exotic stuff.
-
@Smaug said:
I was trying to strip the jacketing off of a cable of signal level wiring. The jacket material was designed to be abrasive-resistant, but I could NOT strip it with a proper dedicated wire stripper.Out came the razor sharp blade of my Wenger Pocket Toolchest. I lightly cut a ring around the cable and it pulled right off. Thankfully, the tiny (24 AWG?) wires inside the cable had regular thermoplastic insulation instead of that exotic stuff.
I bet your glad you checked a bag to bring your multitools now!
-
Opened a can of pears. Man I love the Wenger can opener. I know people swear by the Vic can opener but I never got the hang of it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login