And so it begins.... (My adventures into Alox!)
-
Here is my latest completed Ti mod. :D



-
Just a crazy idea. Would it be possible to use Leatherman mini pliers from the Squirt or the Style PS as the basis, and add SAK 58mm tools and your scales?
-
Very cool Syph!!!!!!
-
@Sakpan74Gr said:
Just a crazy idea. Would it be possible to use Leatherman mini pliers from the Squirt or the Style PS as the basis, and add SAK 58mm tools and your scales?What is this "Leatherman" model you talk about?! I know not of any such Victorinox...

-
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.
-
@Sakpan74Gr said:
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.Check this out: 58mm with pliers experiment
-
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.
Check this out: 58mm with pliers experiment
Oh yes, I am aware of this. I had the same idea! But I was thinking that the 91mm pliers are not the most suitable, because they do not fold, and the tool is bigger. Since there are no Victorinox mini folding pliers, other manufacturer's pliers might be used.
-
And just one of those little alox ones today...






-
That's a beauty Syph

Sent from my XT901 using Tapatalk
-
Love the blue liners with the black scales, don't think I've seen that before.
-
:ahhh you have blue liners!

-
:ahhh you have blue liners!

-
@Sakpan74Gr said:
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.Not sure about the LM Style and Squirt pivots, but the Vic 58mm brass pivots are 1.6mm, and the Gerber Dime has 3mm screw pivots. The screw part of the Dime pivot is still bigger than 1.6mm, and there isn't enough meat on the little scissors and other tools from the 58mm to flog out to 3mm. Perhaps a shorter 3mm pivot that just went through the pliers section and a longer screw could incorporate Vic 58mm tools into the Dime. That would make it worth carrying then.
-

That looks fantastic and such a great tool-loadout :D
-
I'd definitely carry that if it had the Electrician blade over the hawk bill. Looks great

-
@TazzieRob said:
I'd definitely carry that if it had the Electrician blade over the hawk bill. Looks great
Oh, and it had scissors
-
Ive been asked this question more often lately so I thought I should take the time to explain with a sweet MS Paint diagram.
Question... what can cause main blade rubbing on awl in a modded 93mm.
Answer... If the blade pivot hole is not drilled at the correct angle it can change how the blade sits. If you look at how angled a 93mm blade is, then picture laying it flat to drill it, it can then alter the pivot angle and then cause the blade tip to sit closer to the backside scale and rub.
-
Isn't it about time you commissioned a batch of 3mm hardened stainless pivots?

-
@hiraethus said:
Isn't it about time you commissioned a batch of 3mm hardened stainless pivots?
Since I mostly work on 91mm size now its not worth it. :D 2.5mm pivots would be too small I think to be strong enough. Drilling out tools and springs for a mod is maybe 30 minutes of effort. Blade layer and opener layer springs dont even need drilling.
1/8 inch carbide bits are cheaper too then metric around here so it's just easier to stick to imperial. 75% of the effort in the modding time on the 91s is working on the scales anyhow, so Im trying to figure out faster ways to finish the Ti scales.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login