Frustrating experience with Wave?
-
Howdy - spent some time lurking around here trying to find some answers, but couldn't quite find what I'm after (or maybe it's just late and I suck at looking...)
Few months ago I bent the jaws of my Wave cutting some hardened wire, which was great - spoke to our local service agents in New Zealand (leatherman isn't officially here, they just have a service agent), and they replaced it - but the pliers were excessively tight on the knife and wouldn't open properly - so I fired them an email, they said send it back, and after a two week wait for them to get more stock (apparently they don't keep stock of the black oxide versions - helpful), they've sent me another, with exactly the same problem.
I've had a wave for near on six years, and the first one I've had was incredible. Never had an issue all the way up till I tried to go a bit far with some wire-cutting - which was totally my fault on that one - but the replacements are shocking.
At this point, three tools in, I'm at the point where I simply don't have time to send it in for warranty again right now. It's thoroughly lubricated (WD40), it's been cleaned and re-lubricated, I've had to loosen one of the TS10 bolts to allow the serrated blade to open at all, and I've got no idea where to go from here.
Anyone have any tips for the following two things - loosening the jaws of the pliers, or tightening the legs of the pliers? I've had a couple of cracks at it tonight, but with limited tools I'm running out of ideas.
Any help would be massively appreciated!
Thanks
Andrew -
Every LM I have got needed a break in period. The pliers will be tight at first, but they will loosen up. Best the to do is to open and close the plierhead while watch your favorite show.
Nate
That's us mobile -
Where in NZ are you?
-
@ducttapetech said:
Every LM I have got needed a break in period. The pliers will be tight at first, but they will loosen up. Best the to do is to open and close the plierhead while watch your favorite show.Nate
That's us mobile+1 on that, had my Wave's pliers real tight at first as well, but after opening and closing them real fast and often while watching something with WD-40 in solved the problem real quick.
Dream. Wish. Leave nothing undone. Repeat.
-
@ducttapetech said:
Every LM I have got needed a break in period. The pliers will be tight at first, but they will loosen up. Best the to do is to open and close the plierhead while watch your favorite show.Nate
That's us mobileHey Nate - thanks for the quick reply. I've had a couple of other leatherman knives (skeletool, and another wave), and they've never been so tight that the legs of the pliers close before the plier jaws open. I tried what another member on the forums suggested with cutting some small nails with the cutters to loosen the jaws, and that made no difference at all.
Down in Wellington is where I'm based!
-
That does sound like there is something wrong with the plier head. Weird. Not sure about how you could fix this without sending it back.
Nate
That's us mobile -
You should try oil-open-close-repeat first. I had couple stiff LM's that i got better with this method. One Wave, and BO Surge, and Freestyle for example. Lots of black oil comes from plier pivot. Keep some paper to wipe it off.
-
I've had good and bad. Some will seem good, then you put real pressure on the handles and they tighten right back up, no matter how clean the pivot is. It's weird
-
New style BO Surge opening the tool was tight, once opened opening the pliers tight, all tools tight. I've not fooled with the tool in the least. I just used the heck out of it and with time it has loosened nicely. The tool is still "tight" but not so much so that it's annoying.
I've had some Waves that one leg was tight along with the plier. I've found as others have said with usage the tool does loosen. I've never to my recollection loosened the torx to "fix" the tightness.
-
Save yourself some time....and buy a spirit [emoji48]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
