What's your latest GERBER?
-
This should go in the knife section, but I'm already here. Costco had this on for $29, so I couldn't pass it by again.
Sent from my iPhone using Tapatalk

-
I stumbled on a Resolve from the less popular Suspension family. I do have some of that family already and even though it´s not my intention to get them I thought "I might as well....."
The only problem is that the tools are awfully stiff on one side. It seems like one of the washers with a small tab is dislocated or broken and maybe that´s the reason.
I´v tried to loosen up the torx which is pretty straight forward compared to the cnurled screws on Leatherman. I ´v heaten up the screw with a lighter but it´s so stuck i can´t move it.I even destroyd a premium torx driver that coudn´t stand the force.
I do suck at it though I´m quite handy about other stuff but I never managed to undo a LM cnurled screw and now I ´m defeated by a simple Gerber torx to.


-
@Mr Biriyani said:
I stumbled on a Resolve from the less popular Suspension family. I do have some of that family already and even though it´s not my intention to get them I thought "I might as well....."The only problem is that the tools are awfully stiff on one side. It seems like one of the washers with a small tab is dislocated or broken and maybe that´s the reason.
I´v tried to loosen up the torx which is pretty straight forward compared to the cnurled screws on Leatherman. I ´v heaten up the screw with a lighter but it´s so stuck i can´t move it.I even destroyd a premium torx driver that coudn´t stand the force.
I do suck at it though I´m quite handy about other stuff but I never managed to undo a LM cnurled screw and now I ´m defeated by a simple Gerber torx to.

Did you try both sides? Generally the post side is keyed, trying to move that side won't work well.
-
@Mr Biriyani said:
I stumbled on a Resolve from the less popular Suspension family. I do have some of that family already and even though it´s not my intention to get them I thought "I might as well....."
The only problem is that the tools are awfully stiff on one side. It seems like one of the washers with a small tab is dislocated or broken and maybe that´s the reason.
I´v tried to loosen up the torx which is pretty straight forward compared to the cnurled screws on Leatherman. I ´v heaten up the screw with a lighter but it´s so stuck i can´t move it.I even destroyd a premium torx driver that coudn´t stand the force.
I do suck at it though I´m quite handy about other stuff but I never managed to undo a LM cnurled screw and now I ´m defeated by a simple Gerber torx to.

Did you try both sides? Generally the post side is keyed, trying to move that side won't work well.
Aha, this is interesting information. Thanks. How do I know which side to turn?
-
@Mr Biriyani said:
@Mr Biriyani said:
I stumbled on a Resolve from the less popular Suspension family. I do have some of that family already and even though it´s not my intention to get them I thought "I might as well....."
The only problem is that the tools are awfully stiff on one side. It seems like one of the washers with a small tab is dislocated or broken and maybe that´s the reason.
I´v tried to loosen up the torx which is pretty straight forward compared to the cnurled screws on Leatherman. I ´v heaten up the screw with a lighter but it´s so stuck i can´t move it.I even destroyd a premium torx driver that coudn´t stand the force.
I do suck at it though I´m quite handy about other stuff but I never managed to undo a LM cnurled screw and now I ´m defeated by a simple Gerber torx to.

Did you try both sides? Generally the post side is keyed, trying to move that side won't work well.
Aha, this is interesting information. Thanks. How do I know which side to turn?
That can vary between models. My guess would be the saw and scissor sides. Get it nice and hot with the lighter first as well.

-
Thanks Zoidberg.
When I have time I will give it one more try. -
Diesel

-
How do you like it dks?
Sent from my XT901 using Tapatalk
-
I expected it to feel more solid, stronger than my ST300, but it just feels like an MP600, which could be good or bad...
I posted some comparison pictures in the what you have on the way thread.
-
I think Gerbers are growing on me. Can't believe how much I liked that BO frame when I got it... Whats next a Flik?
So I tore all my MP-600 (a whoooping two pieces) apart and put what I perceive as the most useful tools back in. Technically not new, but its a new look.

-
Just realized that I have silver scissors and blade-holder...
MP-600 Panda and Bladeless MultiLite reverse Panda


-
Nice ones Big E

Sent from my XT901 using Tapatalk
-
Looking good Beat, welcome to team FrankenGerber.

-
Just got a Gerber Dime, my first Gerber. Have to say, I am very very unimpressed with the fit and finish on this tool, and it has some really questionable design choices. Then again, what did I expect for $13 new.
The drive on the torx screws holding this thing together looks like it was carved out with a stone arrow or something. I don't get it, they are off center and already look stripped.
-
@NetsNJ said:
Just got a Gerber Dime, my first Gerber. Have to say, I am very very unimpressed with the fit and finish on this tool, and it has some really questionable design choices. Then again, what did I expect for $13 new.The drive on the torx screws holding this thing together looks like it was carved out with a stone arrow or something. I don't get it, they are off center and already look stripped.
Got any pics to back up that brilliant description? -
Unfortunately the camera on my phone isn't quite good enough to capture what I am talking about. :(
-
Email Gerber about it, they've taken very good care of me so far. I live in Sweden and they have shipped replacement firesteels for my Ultimate Knife and brand new knives for free, even though my proof of purchase was questionable at best. Basically, their customer service is brilliant and they've made me a customer for life.
-
With that said, I have also found that Dimes dont have the best QC. I did get a lemon once, the pliers were poorly machined and wouldn't really cut anything. The handles weren't completely straight and they rubbed against each other a lot, which caused the corners to wear off on both sides. I took it apart because I wasn't going to use it anymore. I got myself 3 more of them and gave away 2 as gifts, these seem to be holding up just fine. Easy to get the tools out, nice fit and finish and so on.
So 3/4 were good then. I could've just sent that first one in I suppose, but at the time I just couldn't be bothered.
-
Hi WiseDuck, thanks for the advice. I don't care enough about this tool to start fiddling with Gerber over it. The screws are a little unsightly and I imagine it would be hard to disassemble, but it functions fine so I can't really complain too much for $13. It will sit on my desk as a really fancy package opener now. I filed down some of the corners and it opens and closes a lot better now.
-
My latest and my only GERBER!..All my multi tools are Leatherman but decided to add this little guy to the family :D...and by the way, the sheath also fits the Micra like a glove.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login