What's your latest Leatherman?
-
OSSA1970. I had a 1972 250 Pioneer. One of the best enduros in it's day.
I just got a 2000 1st gen Wave.
-
-
@cannonball said:
OSSA1970. I had a 1972 250 Pioneer. One of the best enduros in it's day.I just got a 2000 1st gen Wave.
I agree, I had a 1970 Mick Andrews 250 Trials, green and yellow, same as the Pioneer. Loved it.
-
I got myself an original Supertool :D
-
A $4 eBay PST, worked over pretty well, but plenty of life left. Wish I had pics of the before.. It was pretty dirty, completely broken blade, jammed cutters. It's from 0194/0194, Marlboro edition. I took it apart, soaked the plier head in 50/50 ATF/acetone. Spent an hour or so cleaning every piece with a shop rag and a bit of wood to scrape with.
After cleaning and working the plier head out, I grabbed a hand file and went to town on the wire cutters, which now bypass with minimal contact, only at the very end, and not enough to really hold the jaws shut. The cutters still work fine.
Next, I set about fixing my knife situation. I had a combo edge sog blade, off a powerlock. It was better than the stub left, but a touch too thin. I had to steal a washer off of my custom kick, and then set about hand filing the back of the pivot so it would sit right in the handle, and a little off the top so the lockup isn't bending the spring so far.
In the end, the Philips is chewed but functional, the file is broken but mostly there, the little driver is now reprofiled, in addition to the above. But for $4, and a bit of love, this tool still has a lot of life left, no need to involve the company


-
@SAKnight said:
A $4 eBay PST, worked over pretty well, but plenty of life left. Wish I had pics of the before.. It was pretty dirty, completely broken blade, jammed cutters. It's from 0194/0194, Marlboro edition. I took it apart, soaked the plier head in 50/50 ATF/acetone. Spent an hour or so cleaning every piece with a shop rag and a bit of wood to scrape with.After cleaning and working the plier head out, I grabbed a hand file and went to town on the wire cutters, which now bypass with minimal contact, only at the very end, and not enough to really hold the jaws shut. The cutters still work fine.
Next, I set about fixing my knife situation. I had a combo edge sog blade, off a powerlock. It was better than the stub left, but a touch too thin. I had to steal a washer off of my custom kick, and then set about hand filing the back of the pivot so it would sit right in the handle, and a little off the top so the lockup isn't bending the spring so far.
In the end, the Philips is chewed but functional, the file is broken but mostly there, the little driver is now reprofiled, in addition to the above. But for $4, and a bit of love, this tool still has a lot of life left, no need to involve the company

You're a good man. I find your story inspiring

-
Great save SAK

-
In my search for an original leather sheath for my Supertool I finally scored one on E-bay, it even came with another Supertool in it

-
Hey thanks guys!

What can I say? I hate spending more money than I have to

Tough old tools, though.
Steve- I've been tempted by a couple, just for the sheath.. If only I sheath carried...
-
If I won the lottery or came into some money I would so go on a LM buying spree >:D
-
Check out the 'what have we got on the way' thread and witness the spending power of a 20 year old

-
Bought this No. 6 new for $6.75 shipped. I bought it mostly because the seller threw in a Duracell screwdriver, which I had gotten with batteries years before, but my grandmother once confused the handle (has a double sided flat and Phillips blade bit and I'd misplaced the bit at the time) for a dead AA battery and tossed it with a bunch of other dead Duracells I'd forgotten to throw away at the time. Learned my lesson that day, throw away my dead batteries as soon as I change them!
I will be using the No 6 as a backup and a a multitool I can carry when I'm going to places that don't allow knives. The screwdriver will be used for the same thing I kept the old one for, one I keep on my dresser to open battery compartments.
At about $3 a piece, I think I did well.
-
I've got this one on the way.
-
What does one with Nato des. look like ...got any pics

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








If my core didn't have a NATO designation, I'd be pretty darn jealous about now!