And so it begins.... (My adventures into Alox!)
-

That looks fantastic and such a great tool-loadout :D
-
I'd definitely carry that if it had the Electrician blade over the hawk bill. Looks great

-
@TazzieRob said:
I'd definitely carry that if it had the Electrician blade over the hawk bill. Looks great
Oh, and it had scissors
-
Ive been asked this question more often lately so I thought I should take the time to explain with a sweet MS Paint diagram.
Question... what can cause main blade rubbing on awl in a modded 93mm.
Answer... If the blade pivot hole is not drilled at the correct angle it can change how the blade sits. If you look at how angled a 93mm blade is, then picture laying it flat to drill it, it can then alter the pivot angle and then cause the blade tip to sit closer to the backside scale and rub.
-
Isn't it about time you commissioned a batch of 3mm hardened stainless pivots?

-
@hiraethus said:
Isn't it about time you commissioned a batch of 3mm hardened stainless pivots?
Since I mostly work on 91mm size now its not worth it. :D 2.5mm pivots would be too small I think to be strong enough. Drilling out tools and springs for a mod is maybe 30 minutes of effort. Blade layer and opener layer springs dont even need drilling.
1/8 inch carbide bits are cheaper too then metric around here so it's just easier to stick to imperial. 75% of the effort in the modding time on the 91s is working on the scales anyhow, so Im trying to figure out faster ways to finish the Ti scales.
-
I still havent finished up the textured Ti mod as I was off camping for the weekend, but I should have it together tonight.
I did finish a plain scaled Climber though. :D





-
And here we have the textured one... and its for me! Havent built myself one in ages and Ive been wanting a textured Ti 91mm in my favorite configuration... super tinker with tweezers! :D






-
Very nice!

-
Forgot the comparison pic vs standard super tinker. People always ask about thickness of these conversions. Noticeably thinner due to thinner scales and dropping the outer liners.


-
Wow. Those textured scales are worth
over. Great job as always!!! -
I may be alone on this one, but I don't like the textured scales when the "groves" are large like that.
Have you thought about doing (or have done) old school ribbed scales?
-
@captain spaulding said:
I may be alone on this one, but I don't like the textured scales when the "groves" are large like that.Have you thought about doing (or have done) old school ribbed scales?
I did some of those on 93mm Ti scales and they work fine. Never did use them on a build though.
-
@captain spaulding said:
I may be alone on this one, but I don't like the textured scales when the "groves" are large like that.
Have you thought about doing (or have done) old school ribbed scales?
I did some of those on 93mm Ti scales and they work fine. Never did use them on a build though.
Do you still have them?
-
@captain spaulding said:
@captain spaulding said:
I may be alone on this one, but I don't like the textured scales when the "groves" are large like that.
Have you thought about doing (or have done) old school ribbed scales?
I did some of those on 93mm Ti scales and they work fine. Never did use them on a build though.
Do you still have them?
What he means to say pictures or it didn't happen.

-
I havent got any pics of the Ti ones ribbed, but the prototype alox I did by hand were ribbed.

Its a nice look but the crosshatch is better grip as it provides grip in all directions.
-
I filled the cutout on this one with Al before I tumbled it and wondered if it would stay shiny or not. It didnt get as dark as the Ti but did dark some.



-
@Syph007 said:
I filled the cutout on this one with Al before I tumbled it and wondered if it would stay shiny or not. It didnt get as dark as the Ti but did dark some.


The Al has a very nice look to it when used in the cutout. Kind of a complementary, understated logo for a working tool. Very nice!.

-
nice! That one is like perfect!
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
