What did you use your Leatherman for today?
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
-
@eddie1115 said:
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
Thanks! And you're right, I noticed some bad vibrations getting off the highway. I was hoping I could get to the airport (and back) before something broke, but that was not the case...
The silver lining in all of this, when I got back, the company running the parking lot area said they could cover the tow back to my house, and I was greatly appreciative :)
-
Nothing so adventurous for me and my Rebar today, although it got me out of similar jams in the past. I used mine to fix my fridge today, which we woke up to not working after going to the grocery store last night. Isn't that the way it always works?!
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
Thanks! And you're right, I noticed some bad vibrations getting off the highway. I was hoping I could get to the airport (and back) before something broke, but that was not the case...
The silver lining in all of this, when I got back, the company running the parking lot area said they could cover the tow back to my house, and I was greatly appreciative :)
I had an old Chevy truck I drove for over a year with a u joint vibration. It had a huge cross member brace under the driveshaft so other then a little damage to the bottom of the truck there was no worry about it hitting the ground. Finally gave up the goods but seeing how I bought the truck new in 92 and finally sold it before deployment last year I think I got my moneys worth.
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
Thanks! And you're right, I noticed some bad vibrations getting off the highway. I was hoping I could get to the airport (and back) before something broke, but that was not the case...
The silver lining in all of this, when I got back, the company running the parking lot area said they could cover the tow back to my house, and I was greatly appreciative :)
I had an old Chevy truck I drove for over a year with a u joint vibration. It had a huge cross member brace under the driveshaft so other then a little damage to the bottom of the truck there was no worry about it hitting the ground. Finally gave up the goods but seeing how I bought the truck new in 92 and finally sold it before deployment last year I think I got my moneys worth.
Nice! I'd say so.
-
-

Is that a Nitecore whistle?
Just ordered one, are you happy with yours?
Love whistle , super light and compact

-
Used my OG Supertool to replace a three prong plug on a heavy duty extension cord for work.
-
Skeletool killed it today! Must be itching to prove itself on its first day back!
I work in the back of Homegoods, a store that sells, well, home goods (from furniture to kitchen to shower curtains to garden things), and the first use was opening boxes (when the mgr. wasn't about sshh). The second, was the woman next to me needed a screwdriver for something (we unbox and occasionally assemble things) needed a Philips, whip out the skeletool (Philips already affixed of course), boom. Even elicited a "wow this really works well!" And third, I was able to tighten one of the screws up on my motorcycle helmet on the ride home.
Lovely day to be a Leatherman :DEdit: A paragraph this size typed on a phone will have errors. It's a fact. :)
-
I fixed our rubbish bin with my Charge and modded a nerf gun with my OHT.
-
I used my Style CS to open some packaging. It cut like butter

-
Wave + PW2 = sweet combo.

-
I used my micra to cut and file my fingernails.
-
I was frustrated when I needed 3 hands for a soldering job on my bicycle lithium battery pack that takes me about 50 miles on one charge,
So I stopped and thought, darned it, I need a wise,
so I took a rubber band put it on the handles and voila ! the wise ,
You can actually load the jaws to pretty much any clamping force that you need.Sent from my SPH-L600 using Tapatalk
-
So I've been on a business trip till yesterday having great time by the sea in a fantastic Ukrainian city Odesa. My Wave came was next to me of course and was used extensively to open my favorite Corona beer, cut limes and watermelons and even to tighten the screws on a quite a bit loosened bathroom shelf in my hotel room, which was not ok and could be easily reported+fixed, but why bother if I can just do it all myself? :) Bit driver/extender was real useful there

-
Way to go Alexanderre! I'm a Corona fan myself, and I've heard Odessa is gorgeous. I used the scissors on the PST II to cut open a packet of instant coffee about 10 minutes ago.
-
@Barry Rowland said:
Way to go Alexanderre! I'm a Corona fan myself, and I've heard Odessa is gorgeous. I used the scissors on the PST II to cut open a packet of instant coffee about 10 minutes ago.Thanks, it really is a nice place, which I haven't been to for quite a while and expected way worse, but it pleasantly surprised me a lot :)
And girls there are just OMG [emoji76]
-
@Nano-Oil.com said:
I was frustrated when I needed 3 hands for a soldering job on my bicycle lithium battery pack that takes me about 50 miles on one charge,
So I stopped and thought, darned it, I need a wise,
so I took a rubber band put it on the handles and voila ! the wise ,
You can actually load the jaws to pretty much any clamping force that you need.Sent from my SPH-L600 using Tapatalk
Well done.
Which model Leatherman did you use?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
