What's your latest SAK?
-
I bought 3 SAKs at the flea market today
First up I found an Electrician from '97 with the Old Cross.
the rivet looks like it has had some work done

Next up a a Champion that I date as 1983-1985 but since the cap lifter has a half stop, this must be 1985
I noticed the Brass pin has a bushing/sleeve/collar? in the spot where the inline phillips rests, and the liner between the file and saw is thicker than the others and is full height (same as the ones adjacent to the scales)
and the one I feel was the best find (though I did not own an electrician, old cross alox, and I LOVE champions)
model 134k roughly 1959-1962
the shield seems thicker than the newer ones and has a goldish tint to it.
the back phillips has a square shaft and has a file, but does not have the can key.
the can opener has the +PAT on it and the cap lifter has the wire stripper
small blade has the clip point
The main blade has "Abercrombie & Fitch" / "Made in Switzerland" on it
the back tang is a Victoria :ahhh
I am very happy with this little find. I wish it had the Toothpick and Tweezers, and a keyring (I like pocket clip carry), but otherwise this is an amazing older
-
I wish they still offered the clip point as the small blade.
-
@raistlin65 said:
Just got this in for the Super Secret Ignore This! SAK Giveaway that is an easter egg hidden in the Swiss Army Knights Forum
Can you find it?
Nope, we've decided to ignore this one!
-
Victorinox Alox Pionier Limited Edition 2015




-
Just got this in for the Super Secret Ignore This! SAK Giveaway that is an easter egg hidden in the Swiss Army Knights Forum

Can you find it?
Nope, we've decided to ignore this one!
I can't ignore that SAK.

-
Nice one Chris

But in the description I read the year is engraved, right?
Some other member mentioned it's only a print?
A laser engraving perhabs?Regards
Markus
-
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.
-
@chris.customworks said:
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.Its definitively painted on top, you can feel it.
Its good paint though, does not come off with alcohol or acetone. Also tried scratching with fingernail and hardwood spatula without success.
-
Nothing special I guess, replaced my SC XLT with a Victorinox / Wenger EVO S54. Wear out the saws and files in about 3 to 5 years. The rest is okay - so I will use it in the office to work on things.
The S54 is now Vic, not Wenger, although it looks like one - it has EVO grips and is super nice in the hand. Most of the tools are Wenger, except the cap lifter and can opener - those match the Vic style. I love the spring less scissors and pliers. I have a big bag of "09" springs around here just to replace the things. I go thru about one each per year.
IF anyone knows how to sharpen the saws, both metal and wood, or re -- some how make the file cut after it wears down without replacing the blade, I would be interested.
-
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.
Its definitively painted on top, you can feel it.
Its good paint though, does not come off with alcohol or acetone. Also tried scratching with fingernail and hardwood spatula without success.
Why would you?

-
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.
Its definitively painted on top, you can feel it.
Its good paint though, does not come off with alcohol or acetone. Also tried scratching with fingernail and hardwood spatula without success.
Why would you?

For the greater good. :)
-
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.
Its definitively painted on top, you can feel it.
Its good paint though, does not come off with alcohol or acetone. Also tried scratching with fingernail and hardwood spatula without success.
Why would you? :think:
For the greater good. :)
We scientists are naturally curious, but unlike cats we have only one life so we live on the edge :P
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Received this Ranger in the mail today. Bought it second hand, but it doesn't appear to have ever actually been used. This is my first SAK with the metal saw/file, so now I'm trying to figure out of it's the old version or the new one.

-
I've purchased two different 91mm Golfers over the last three weeks. Both came with Plus red cellidor scales and the combo tools both have the 90 degree stop. Both were stripped, cleaned, and oiled today.
Here's the first one with new Plus scales.




-
@lukenferlut said:
Received this Ranger in the mail today. Bought it second hand, but it doesn't appear to have ever actually been used. This is my first SAK with the metal saw/file, so now I'm trying to figure out of it's the old version or the new one.Well done nice purchase!!...
Well the knife is post 2005 - You can tell from the Tang stamp.
Also that year the new stainless file came out - However yours looks like the pre-stainless version.
So I'd say you have a 2005 knife with the pre-stainless 'third generation file'.
This will help. -
Received this Ranger in the mail today. Bought it second hand, but it doesn't appear to have ever actually been used. This is my first SAK with the metal saw/file, so now I'm trying to figure out of it's the old version or the new one.
Well done nice purchase!!...
Well the knife is post 2005 - You can tell from the Tang stamp.
Also that year the new stainless file came out - However yours looks like the pre-stainless version.
So I'd say you have a 2005 knife with the pre-stainless 'third generation file'.
This will help.Hey, thanks for the info and the great link. I haven't really had a chance to use it yet; is the third gen file notably worse than the current stainless version?
-
I think they are both fine
Altough I have never really used either very heavilyThe older one will be slightly more prone to rust but only if you do not look after it
Keep it dry etc and it will be fine. -
@Huntsman said:
I think they are both fine
Altough I have never really used either very heavilyThe older one will be slightly more prone to rust but only if you do not look after it
Keep it dry etc and it will be fine.Guess I'll have to find out for both of us :)
I'm not too worried about rust; I've kept my Moras and countless other carbon blades in good shape over the years. Thanks again for your input! -
@raistlin65 said:
Just got this in for the Super Secret Ignore This! SAK Giveaway that is an easter egg hidden in the Swiss Army Knights Forum
Can you find it?
Last chance. This could be someone's latest SAK. The GAW ends later today.
-
I couldn't stay away from this

i present you... my first Farmer:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






















