Knife/gadget blanket
-
Problem: Keep nice toy... gadget... necessities(!) separated and protected without adding a ton of extra weight to the total.
Added problem: All those nice EDC thingies often have odd shapes and edges.
Added problem: I'm lazy. And all thumbs.
Oh, and it would be nice if the solution was compatible with long term storage. One obvious solution is of course a furoshiki style wrap. These have the disadvantage that they're not the quickest to wrap or unwrap, at least not for me, and the require a fair bit of cloth. But, building on that basic idea, why not simple tie a piece of cord to the corner of a piece of cloth and roll it up as a lazy man's furoshiki? Then it would be quicker to (un)wrap and it would need less fabric. Bonus: Everything can be repurposed as needed.
Now for some math. Consider the figure below: A more or less rectangular thingamajig is to be wrapped in a quadratic piece of cloth. The length of the thing is 2l, the width 2w, the length of the cloth is o. We need c extra clearance to the edge of the cloth to pack it all up properly. (Refer to the figure below.)
cos(45°) = sqrt(2) / 2. This gives the distance from the center of the cloth to a corner as (l + 2(c * cos(45°)) + w) = l + c * sqrt(2) + w. This gives o = (2 * (l + c * sqrt(2) + w)) / sqrt(2). Solving for a clearance of a "metric inch" (25 mm) and the thingamajig as CyberTool L, in other words 2w = 33 mm, and 2l = 91 mm, gives us o = 137.68 mm.
So... I took a piece of cloth about that size, in this case one of my microfiber wipes for my glasses, tied a piece of cord to a corner, and wrapped up a CyberTool L to see if it all was as easy as it sounded. It was.
QED.
Hope this can be of use, or at least entertainment to somebody here. :)


-
Cool to see the math behind the problem.
But why not just sew a pocket with a drawstring at the top??
-
Mainly because I'm lazy, but also because this is a little more flexible and becomes a tighter fit. That's useful if fumbling around without looking. A wrap takes the size of what is wrapped, a pouch does not adapt the same way.
And as I mentioned, everything here is easier to repurpose on the go than with a proper pouch.
Edit: What I was getting at above was I think it is better using wraps than pouches if you have many small, irregularly shaped things that must be kept separate going into your pack. if we are talking about a single pocket knife you are going to use often, a pouch would of course be quicker.
-
I often wrap up tools and knives going into a pack in a tea towel. Add item fold roll, add item fold roll etc. Works really well for me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

