Switchplier - New vs Old
-
The plierheads are an altogether different construction. Not just the shape. Not just the lever pin upgrade. Not just the fact that the sprind is now external rather than hidden within hollow cast pliers. The original model looks like it had an adjustable pivot. This has now just become a standard riveted construction on the latest variant.


-
So far, I hope you'll agree, the Switchplier actually looks a very promising tool. They almost had a good tool with the original model, but it was let down by the strength of the pliers, or raster the cast lever pin that makes the pliers work.
After a few years absence, the tool is back and they have learnt from the past, and have taken steps to make this tool far more usable and reliable.
.... but all is not perfect, and this particular specimen has a bit of a problem.....
-

Looking at the pliers in this picture you can see a bit of a gap between the plier head and frame on the right hand side. Stow the pliers, fire them out, stow the pliers, fire them out, and soon the picture looks a little different.

After a few stowage and deployment cycles the spring starts creeping out of the plier head.

After maybe a dozen times of being stowed and fired, this is what can happen

The spring pops out completely!

Now the spring will fairly easily coax back on with some pressure with you're thumb, and if you give the spring a little poke back in each time you deploy them this doesn't get to the pop out completely stage, but this shouldn't happen at all. SOG's quality demons strike again!
-
I'm currently in talks with hiraethus about this tool possibly stopping with me, in which case I don't mind attempting to strip the plier head assembly down, and do a bit of jiggery pokery to stop this happening, but.....
COME ON SOG!!!!
This is potentially you're best tool that you've released to the market for a while. Don't let something sloppy like this spoil it. You need to look into this guys 
-
Great in depth review/comparison Al
I'm curious about this one, although I'll admit it would be more for fiddle factor fun considering the limited use my MTs get. Bummer about that pin popping out though.... -
@Monrogue said:
Great in depth review/comparison Al
I'm curious about this one, although I'll admit it would be more for fiddle factor fun considering the limited use my MTs get. Bummer about that pin popping out though....Thanks mate

To be honest I really feel there is more to this tool than just fiddle factor. When you consider that individual tools are readily available, and SOG actually support their customers modifying their tool, you can set the tool up with the tools you need and have a multitool that's custom built for your requirements.
The spring leg coming out is a real shame, but hopefully if this tool ends up staying with me, I might be able to remove the spring and crink the leg over so it stops in better
-
True, it does appear capable, and if it had scissors, it would be a good standalone basic MT for me. Maybe SOG will correct that spring leg issue if they realize it is indeed a problem? I don't know if they make revisions if improvements are found to be necessary.
-
The complication with SOG is their products tend to be manufactured in a far off land, so they have less control over the quality aspects as they are trying to resolve issues remotely. There's also the lag from raising the issue to fixing it, and the number of items that will have rolled off the production line in the meantime.
Hopefully this is a rogue one that slipped through, but unless there's a washer missing in mine or something like that, there is a chance that this isn't a one off occurrance.
It'll be interesting to hear from the other members who have one to see if they spring on theirs stays tight to the bottom of the groove or also creeps to the outside
-
@Monrogue said:
True, it does appear capable, and if it had scissors, it would be a good standalone basic MT for me. Maybe SOG will correct that spring leg issue if they realize it is indeed a problem? I don't know if they make revisions if improvements are found to be necessary.Or could this be an isolated problem? I've deployed mine hundreds of times and I still have to see the spring popping out.
-
Wow, thanks for that comparison.
Quick question. Do these cogs around the pliers head serve a function or are these style elements (larger black ones and the finer silver ones)?
-
Question:
Is my analysis of the pocket clip placement right, in that it will fire off the pliers every time you move, if you clip it in your pocket? :P
-
@Etherealicer said:
Wow, thanks for that comparison.Quick question. Do these cogs around the pliers head serve a function or are these style elements (larger black ones and the finer silver ones)?
Purely cosmetic. The only function they serve is to make it slightly less comfortable in screwdriver mode than the original version :-\
-
Is my analysis of the pocket clip placement right, in that it will fire off the pliers every time you move, if you clip it in your pocket? :P
I've not had a misfire yet, but in fairness it's not riden in the pocket much, and I haven't used the tool in anger yet.
I will say though, that the switchplier doesn't deploy with the gender altering ferocity of the Gerber Recoil. So even if you did suffer "premature ejection" you're highly unlikely to be changing the way you walk ;)
-
@Omar Rapace said:
True, it does appear capable, and if it had scissors, it would be a good standalone basic MT for me. Maybe SOG will correct that spring leg issue if they realize it is indeed a problem? I don't know if they make revisions if improvements are found to be necessary.
Or could this be an isolated problem? I've deployed mine hundreds of times and I still have to see the spring popping out.
That's good to hear!

-
Nice work, fiddy! Great that you've been able to get the scissors in and I like the tool set you've chosen. Shame about the spring popping out - didn't do that to me but always looked like it might. I felt it was a good tool - particularly the size, ease of accessing the pliers and the clip - but the access to the internal tools was difficult and the wire cutters were poor. Great to see something different to the butterfly style folding pliers that's so common too.
-
@50ft-trad said:
@Omar Rapace said:
True, it does appear capable, and if it had scissors, it would be a good standalone basic MT for me. Maybe SOG will correct that spring leg issue if they realize it is indeed a problem? I don't know if they make revisions if improvements are found to be necessary.
Or could this be an isolated problem? I've deployed mine hundreds of times and I still have to see the spring popping out.
That's good to hear!

+1
Hopefully this is the case
Sent from my XT901 using Tapatalk
-
@hiraethus said:
Nice work, fiddy! Great that you've been able to get the scissors in and I like the tool set you've chosen. Shame about the spring popping out - didn't do that to me but always looked like it might. I felt it was a good tool - particularly the size, ease of accessing the pliers and the clip - but the access to the internal tools was difficult and the wire cutters were poor. Great to see something different to the butterfly style folding pliers that's so common too.Cheers mate

With the original configuration, the Phillips was below the plier head, which meant the pliers needed to be deployed to get that tool out. As the tool relies on clumping to bring out adjacent tools, there was a battle of friction between the outer tools you were lifting out, and the innermost tools restricted by the pliers.
With the four tool configuration I've got in at the moment, the bit driver passes the stowed pliers freely. This means the clumping actually works to bring tools out rather than keep them in. It does however mean you have to carry the small adaptor part and selection of bits as well as the tool itself, however I don't consider that a huge obstacle to anyone wanting to have a very ergonomic tool with excellent (and customisable) set of drivers. It also would work well for someone who uses hex or torx drives frequently with the right accompanying bits.
I haven't actually used the wire cutters myself, but now I know I'm not taking them on their maiden voyage, I might try them out ;) What was the issue with them? Is stranded wire their kryptonite?
-
Yeah, took a couple of bites to get through some 0.75mm² stranded copper wire.
-
Nice review. I have one on its way to me sometime hopefully this summer. I will inspect mine if and when I get it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

