Crazy
-
Jazzbass wrote that there's no question the SAK discussed above http://www.ebay.com/itm/301689538932?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT is an 84 seeing as the saw has 35 teeth (and not 39 or 29).
Looking at pictures on Sakwiki I don't see 35 teeth on the saw of Artisan or Huntsman small.
Also what model has a 39 tooth saw in 91 ?
Is this Kirky's fault ? -
-
@Shalom said:
Jazzbass wrote that there's no question the SAK discussed above http://www.ebay.com/itm/301689538932?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT is an 84 seeing as the saw has 35 teeth (and not 39 or 29).
Looking at pictures on Sakwiki I don't see 35 teeth on the saw of Artisan or Huntsman small.
Also what model has a 39 tooth saw in 91 ?
Is this Kirky's fault ?The Small Huntsman is an older era knife. I think even the frames are different when they get that old.
-
@ebarberena said:
http://www.ebay.com/itm/Victorinox-alox-Pioneer-2223-Sea-Pioneer-rare-limited-model-/301695405144?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2047675.l2557&nma=true&si=nhwPckeoxEhJLiLJQ5QXGC%252FaDI4%253D&orig_cvip=true&rt=ncReally makes me want to sell all my limited runs.
I could use the money. -
Slight variation, but more of the same.
-
http://www.ebay.com/itm/Victorinox-Damast-Jahresmesser-Damascus-Limited-Edition-2010-Pioneer-/231612943497?pt=LH_DefaultDomain_77&hash=item35ed350c89
This Ltd. pioneer could be yours for only $4,633!
It's a cool knife, I wonder what they sell for usually... -
I'm always perplexed by pricing like this; http://www.ebay.com/itm/New-Victorinox-Swiss-Army-Classic-SD-7-function-Multi-tool-knife-/252040220016?hash=item3aaec48d70
The buy it now plus shipping is $22.95. The Meijer (regional store similar to WalMart) up the road from me has racks of Classic SDs for $11.99 each. These listings just make me wonder if the seller has some nutty reason for thinking their item is worth almost twice as much as millions of identical ones, or if they're just hoping to hook an uninformed buyer.
-
@Mr. Blonde said:
When you open the backtools on a 84 and imagine a line, this line touches the tip of the Victorinox logo. On a 91 you have a ca. 5mm distance to the logo.I hope you understand, what I mean. My English is just a bit above school level. ;)
Hi Mr. Blonde
I was very interested in this post as you seemed very convinced - Yet others disagreed with your conclusion.
So I went and checked out a few from my collection and I think your premise is not quite right.
[Although at one stage I did think they had moved the shield slightly towards the closest end on the older 84mms, which could have explained things]If you take the line of the back tools across the scales:
- On the 84mm range I reckon there is about and 4mm gap to the tip of the shield
- On the 91mm range I reckon there is about and 8mm gap to the tip of the shield
Note: I checked this on backtool Phillips models to make the lining up easier
So there is a difference - But still a gap in both cases!
And I think this the same for old and new knives - Anyone else any comments?
-
The awl and blade ground down by some proto-human? http://www.ebay.com/itm/Vintage-1963-Wenger-Soldier-Swiss-Army-Knife-Victorinox-/321826112313?hash=item4aee54c339 Wow, only $200 US with shipping.

-
@twiliter said:
The awl and blade ground down by some proto-human? http://www.ebay.com/itm/Vintage-1963-Wenger-Soldier-Swiss-Army-Knife-Victorinox-/321826112313?hash=item4aee54c339 Wow, only $200 US with shipping.
Also in the description "light scratching" on the blades, and further grinding and filing recommended on the "spike"...

-
The awl and blade ground down by some proto-human? http://www.ebay.com/itm/Vintage-1963-Wenger-Soldier-Swiss-Army-Knife-Victorinox-/321826112313?hash=item4aee54c339 Wow, only $200 US with shipping.

Also in the description "light scratching" on the blades, and further grinding and filing recommended on the "spike"...

Wow, that awl has been..."weaponized"!!! :o
-
I don't know if this counts but a local listing here has a (looks used) nato numbered OC Soldier for US$200.
-
he's got 100% feedback....... (one sale)
http://www.ebay.com/itm/Victorinox-Elinox-Automobile-Motorist-Swiss-Army-Knife-Technician-screwdriver-/231659312907?hash=item35eff8970b -
Kinda rare I guess, so tack on a few hundred for the price-is-no-object folks. :facepalm:
The extra $ must be for "awesomeness" :P
-
-
@ColoSwiss said:
A $100 for a used piece of Chinese crap.Soldier on 91mm scale???
-
@red_rider_1979 said:
Soldier on 91mm scale???No
@ColoSwiss said:
.... Chinese crap.What a hoot 'Swiss Navy Knife' - I wonder if the seller realises that there is no such thing....
And $100 - This is worth - What? ...... $2-3This really annoys me - I just hope no-one buys and gets ripped off - I pity the poor folk who know no better and get taken in by these outrageous listings.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

