Bail for Farmer mod question
-
Thanks PTRSAK, I am mulling at the moment with this problem of a bail.
I've been experimenting with the 'paint pot' wire I mentioned earlier but I'm not convinced it's going to have the strength required.
I don't want to compromise the strength of the pins if I drill into them for your method.
I'm at an impasse.
Half of me (the cool and heroic half with no idea of financial restraint) wants to throw caution to the wind and just do it, and the more sensible, cardigan and underwear wearing half of me is aware that this is a Farmer and it shouldn't go to waste as I may never get another one, and it's going to be enough of a challenge to get the peening right

Also Hiraethus very kindly donated a scale and the pins so I also don't want to squander his good will.
Hmmmmmmmmm. :ahhh
-
I'm raising this thread again as I'm nearly at the point where I can finish my Farmer mod.
**What I'm looking for is a small length of hollow rivet and possibly a bail if anyone has one spare.
**
I have a couple of sets of unused nylon 84mm scales in red in exchange, or an alox blade, an opener layer (CO modded as a thin SD) a couple of scales (shield scale is a little marked but nothing terrible) and springs.I can put up pics if anyone is interested in a trade.
-
You can get hollow brass tubing, in a variety of sizes, via K&S at ebay. Here's an example:
http://www.ebay.com/itm/NEW-K-S-Brass-Tube-3-32-1-8-5-32-Bendable-3-5075-NIB-/331153039793?pt=LH_DefaultDomain_0&hash=item4d1a4261b1 -
@neillcurrie said:
You can get hollow brass tubing, in a variety of sizes, via K&S at ebay. Here's an example:
http://www.ebay.com/itm/NEW-K-S-Brass-Tube-3-32-1-8-5-32-Bendable-3-5075-NIB-/331153039793?pt=LH_DefaultDomain_0&hash=item4d1a4261b1Cheers neillcurrie, but I only need about an inch. There's a great UK site I can get some from, but postage is high. I'm really only after a very amount.
-
Don't use hollow brass it's too soft. You need stainless or Ti
-
Cheers Steve, thinking about it, the SI rivet isn't brass is it? Do they use stainless?
-
Yes it is stainless and very hard to drill out to.
-
Its also bigger diameter than stock 3mm rivots at 3.5mm. I found that out when I tried to reuse the tools from that end and the pivot holes were huge. :D
-
I sat down last night after work to tackle the hollow bail on my Farmer mod.
My first attempt cracked badly
I went much slower in the second attempt, but even so, a small (tiny) crack has appeared on the face of the rivet where I am peening it over.My question is, how much will a tiny crack affect the integrity of the rivet?
If needs be I will post a pic
-
Is that the drilled tube I sent you, or some solid bar? Brass work hardens as you peen it and becomes more brittle but if it's the solid bar I imagine it would be ok. The tube, as there's less metal there to start with, might not be as good. I really should have tried this out beforehand.
-
It's the hollow brass. Would a dab of solder in the gap strengthen it or am I talking crazy?
-
I don't think it will do any harm and it might stop the crack from spreading.

-
@hiraethus said:
I don't think it will do any harm and it might stop the crack from spreading.
Cheers H - I will get my daughter on to it - she's the one with the soldering skillz (as I believe the young call it)

-
Finished article. I will make a bail for it sometime soon;
<a href="http://s923.photobucket.com/user/magentus2112/media/Farmer_zpsjd9y5jpd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i923.photobucket.com/albums/ad80/magentus2112/Farmer_zpsjd9y5jpd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Maybe a little late, but wouldn't a shackle work? Just have to find a more clever attachment than a clevis.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login