What Did You Use Your Multitool For Today?
-
I used my Swiss Tool Spirit X to put a grill together for the weekend festivities. Rebar did help a little in the action too.
Sent from my iPhone using Tapatalk
-
I noticed my apple tree was starting to buckle on certain branches under the weight of the still forming apples. It's not a huge crop, just a fairly young tree. I grabbed some string and some soft coated gardening wire to tie all the branches in so they are helping to support each other. I don't know how well this will go as there's still a couple of months till they're liable to be ready, and this is the first time the tree has had fruit (only four years old).
It was a Sideclip that cut the wire and string
-
I disassembled and reassembled my Waltham model 1883 twice, using the micro screwdriver and chisel on my Swisschamp, and why I don't quite know! Boredom, possibly?!
Sent from my iPhone using A box of monkeys on a treadmill and a quantum leap
-
I had just drilled a hole in the leg socket of a Weber kettle grill. But the hole turned out to be a bit small for the first screw I tried, and I twisted the head off with the impact driver.
I used the pliers on the Victorinox CyberTool 34 to back the rest of the screw out.
I also use the small blade to mark a few points on an old oak broom handle for where I would cut if off with a jigsaw. I was planning to make new handles for the grill, as the old wood ones were rotted out. Didn't get too far though, as the steaks were done first. Come to think of it, I could've used the pen to do that marking...

<a href="http://s134.photobucket.com/user/jzorns/media/Knives/image_zps1g9osgpw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zps1g9osgpw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s134.photobucket.com/user/jzorns/media/Knives/image_zpswsypkm4l.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpswsypkm4l.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Spirit X
Knife to unpack new kitchen appliances (fridge, freezer, and slow cooker)
Phillips screwdriver to reverse freezer door (can opener to prise off blanking plugs)
Pliers to cut moulded plug off washing machine, and plug and a length of flex from an extension lead.Correction: I used dedicated pliers here
Wire stripper on chisel and small screwdriver to connect the two (extending the cable)
Phillips and small screwdriver to remove and refit a plug on the fridge after routing the cable through to a switched fused spur.
Awl to scribe a section of laminate flooring to be chopped out
Bottle opener for accessing a well deserved beer -
I used my Huntsman, Style CS, and Opinel No.9 to cut a universal screen protector down to size. A team effort! :D
Sent from my SM-T700 using Tapatalk
-
With my new Leatherman Rebar, I
**Cut a cable:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpspocttjqy.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpspocttjqy.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Squished it round again; it flattened a bit when I cut it:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsycrxvyml.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsycrxvyml.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Used the knife to strip the jacket and cut the strings:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsxtuepjnm.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsxtuepjnm.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Used the hard wire cutter to strip the individual strands:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsbfaqlavr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsbfaqlavr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Ready for connection!**
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsxb8evjik.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsxb8evjik.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Is it me, or is the wire stripping notch in the LM can opener 94% useless?
-
Wouldn't cutting the insulation be easier with the notch on the can opener?
-
I used the MP600's file to pry open a can of polyurethane tonight. Used the scissors to cut some fine sandpaper as well. Then later discovered a splinter in my finger and used my Rogueneer's tweezers to pull it out.
Sent from my XT901 using Tapatalk
-
Wouldn't cutting the insulation be easier with the notch on the can opener?
I tried it the other day. It works surprisingly well. I'm not sure how it'll work on building wiring with that really tough clear-coated insulation, but I'm going to try that too, first chance I get.
Great. I know the notch on my Spirit worked really well if there was enough wire to twist in the first place.
Also congrats on the 1k. Now it's time for the lard and the chicken
-
It has not been a great day in Smaug's Lair.
My 3 year-old Daughter had a 102 fever when I picked her up from daycare yesterday. This morning, she was like new...for 2 hours, then got the fever back and became really whiney. Fed her twice, watched 1.5 Disney movies, and now she's down for the nap.
Doesn't look like I'm going to get out and have a chance to really put my MT to good use, but I did use the small screwdriver to break the seal on a bottle of kids' acetaminophen to help knock her fever down while she sleeps. Those shrink wrap seals are pretty tight sometimes; there's no WAY I could've gotten this one with a fingernail.
In the background, you can see the half-eaten PB&J rice cake she had for lunch.
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpssiywcak0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpssiywcak0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Used my spartan lite to open my brand new old model Lm Juice S2.
-
@Smaug said:
It has not been a great day in Smaug's Lair.My 3 year-old Daughter had a 102 fever when I picked her up from daycare yesterday. This morning, she was like new...for 2 hours, then got the fever back and became really whiney. Fed her twice, watched 1.5 Disney movies, and now she's down for the nap.
Doesn't look like I'm going to get out and have a chance to really put my MT to good use, but I did use the small screwdriver to break the seal on a bottle of kids' acetaminophen to help knock her fever down while she sleeps. Those shrink wrap seals are pretty tight sometimes; there's no WAY I could've gotten this one with a fingernail.
In the background, you can see the half-eaten PB&J rice cake she had for lunch.
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpssiywcak0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpssiywcak0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hope your daughter is doing better today !
-
Removed the carburetor from a hedge trimmer four times. I tried to fix it for someone.
But these carbs are a disaster. I do rather work on a 1000cc motorcycle than a 35cc strimmer. -
Used my OG Wave to fix the ignitor on my gas grill.
-
Used my Raptor to cut and assemble a box for the kittens. Cut through the cardboard fairly easy although hurt my hand a little.
-
Cutting 1/4" off the ends of some 1 by 2's. Not the straightest of cuts but nipped through the 3 I trimmed pretty fast.


Sent from my SM-N910F using Tapatalk
-
Say down with Skelly and finally put a sharp edge on the 154CM blade that I installed a while ago. Had to pay it back a good bit but boy is it sharp now.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login