Do I need a workchamp?
-
How thick does the champ feel in comparison to tools like the wave or spirit or any other full size mt? Would it be awkwardly bigger in the sense of width?
Sent from my SGH-M919 using Tapatalk
-
@50ft-trad said:
50ft, the only thing I'm not fond of on the champ is the pliers. If I could get a plier less workchamp that would be great
Sent from my SGH-M919 using Tapatalk
If you lose the pliers, you lose the large Phillips [emoji14]ok: (it lives underneath)
True. But that would be sacrifice I am willing to make.
Sent from my SGH-M919 using Tapatalk
-
@50ft-trad said:
50ft, the only thing I'm not fond of on the champ is the pliers. If I could get a plier less workchamp that would be great
Sent from my SGH-M919 using Tapatalk
If you lose the pliers, you lose the large Phillips [emoji14]ok: (it lives underneath)
True. But that would be sacrifice I am willing to make.
Sent from my SGH-M919 using Tapatalk
Fair play matey
However if you were to look into modding one, you could possibly replace the corkscrew for a backspring phillips if that's an option. Losing the pliers would make the tool noticably slimmer 
-
@50ft-trad said:
@50ft-trad said:
50ft, the only thing I'm not fond of on the champ is the pliers. If I could get a plier less workchamp that would be great
Sent from my SGH-M919 using Tapatalk
If you lose the pliers, you lose the large Phillips [emoji14]ok: (it lives underneath)
True. But that would be sacrifice I am willing to make.
Sent from my SGH-M919 using Tapatalk
Fair play matey
However if you were to look into modding one, you could possibly replace the corkscrew for a backspring phillips if that's an option. Losing the pliers would make the tool noticably slimmer 
This would be an Outrider plus metal saw/file, which wouldn't be much thicker than a stock Outrider, which isn't too bad in a pocket. I just got a Hercules recently (Workchamp minus metal saw/file) for my day hike/outdoors bag. I like having a knife-based tool there, and the SAK pliers are good enough for my outdoor uses. If you're pairing with a full sized MT, then the pliers would become unnecessary/wasted space.
To the original question though, YES, you need one ;)
-
Outrider plus file sounds good. I don't like having a saw but now file.
-
Ofcourse, there's always the WorkChamp XL to consider.
I'm a sucker for fat SAKs :D -
Ofcourse, there's always the WorkChamp XL to consider

I'm a sucker for fat SAKs :D -
Do you NEED a Workchamp or do you WANT a Workchamp - be careful how you answer as it will change the entire perspective of this conversation :D
Honestly though, I looked long and hard at one awhile back and just could not justify the size and weight as opposed to a Swisstool or Wave...YMMV
-
I know it has a saw but have you considered a Hercules?
-
I love my Workchamp. It is probably my favorite 111mm model.
I chose it instead of a Swisschamp because it has everything I think I would need, without things I don't think I'd need.
- Longer file
- #1 and #2 inline Phillips'
- Scissors
- Locking blade
- Full opener layer
- Longer saw
It IS thick though. Comfortable in the hand, but not in the pocket, unless you use a pocket hanger.
Here is a pic for comparison, with the Workchamp being the thickest one. Wenger Rangers are to the left of it, and a couple Wenger 85mm's on the right:
<a href="http://s134.photobucket.com/user/jzorns/media/Knives/image_zpslydkdc9x.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpslydkdc9x.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Top-Gear: Awesome pix. Sharp and well-exposed, without distortion. We get so used to looking at cell phone pix here (even good ones) that it is always a shock to my optic sensors to see such sharp ones.

-

Here's an idea.
If you promise not to abuse it and you pay shipping, you can borrow mine for a couple weeks. Then, you'll know if it's worth it for you to drop some serious coin on.
To me, if I'm going to carry a MT on my belt, it's either going to be a Workchamp or a pliers-based MT. The Workchamp is gives quick access to ALL tools and the blade is easy to open even if you haven't got fingernails. (some guys chew them down something fierce)
Also, I think Victorinox's side lock mechanism is the best in the business. More convenient than a liner lock on an MT, safe, and fast. The only one that gives it a run for the money is Wenger's design, where pressing on the shield actuates a liner lock.
-
@Smaug said:
Top-Gear: Awesome pix. Sharp and well-exposed, without distortion. We get so used to looking at cell phone pix here (even good ones) that it is always a shock to my optic sensors to see such sharp ones.
Thanks mate
.Taking pics of my "collection" is a bit of a hobby of mine. I even got a mail from an online knife shop showing one of my pics of the 130mm Vic Delémont collection some time ago, to advertise their knives (you can read all about that here). Long story short, they gave me a BO Rebar to make things right :D.
-
I'm in a similar boat with wondering if I would like a WorkChamp. I've had an Outrider in my rotation for a bit now, but thought I might (eventually) move up to a WorkChamp or Hercules. My main concern is just if they would be comfortable to use, as I don't have particularly large hands, and I know both models are quite beefy.
-
@ToolJoe said:
I know it has a saw but have you considered a Hercules?i have but the file thing again :-\
Here's an idea.
If you promise not to abuse it and you pay shipping, you can borrow mine for a couple weeks. Then, you'll know if it's worth it for you to drop some serious coin on.
To me, if I'm going to carry a MT on my belt, it's either going to be a Workchamp or a pliers-based MT. The Workchamp is gives quick access to ALL tools and the blade is easy to open even if you haven't got fingernails. (some guys chew them down something fierce)
Also, I think Victorinox's side lock mechanism is the best in the business. More convenient than a liner lock on an MT, safe, and fast. The only one that gives it a run for the money is Wenger's design, where pressing on the shield actuates a liner lock.
thanks for the offer i'll shoot you a pm. getting a feel for one in hand would be much easier to decide.
-
@lukenferlut said:
I'm in a similar boat with wondering if I would like a WorkChamp. I've had an Outrider in my rotation for a bit now, but thought I might (eventually) move up to a WorkChamp or Hercules. My main concern is just if they would be comfortable to use, as I don't have particularly large hands, and I know both models are quite beefy.I like the comment someone said about adding a file to the outrider. it seems to get a workchamp would be the best choice unless you REALLY dont need the file.
-
Put a clip on it and you can't but help even like the tool even more.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
(it lives underneath)