Unusual SAKs
-
Who knows about (or has) the knife with a deer head picuture on the side? It's a green one, and I'm not talking about the whitetail deer Jazzbass mentioned. Must be older. If I remember well, it's like a lumberjack configuration but in 91mm. I have seen it twice, a few years ago (one in a belgian auction lot, and one on a german site where a collector was selling his knives, too bad it was already sold...)
-
I'll reply to myself ;)
Dear Herman, the knife you're looking for isn't green, it's black. And it's not 91mm, it's 84 (even better). Lumberjack-ish yes, but big difference is the serrated blade. Look at the picture I found on your computer... Tip: try to go to bed early for once...


-
@Herman said:
I'll reply to myself ;)Dear Herman, the knife you're looking for isn't green, it's black. And it's not 91mm, it's 84 (even better). Lumberjack-ish yes, but big difference is the serrated blade. Look at the picture I found on your computer... Tip: try to go to bed early for once...

Its a madhouse here and sleep is frowned upon, but that is a sweet knife

-
Herman,
I think you may have had this picture of a Victorinox Hunter 111mm in mind when you said it's Green.
You can also see a red version on Sakwiki 111 page Hunter.
-
Indeed, I actually have this knife and probably seeing it often, made me mix up things. :)
-
@Herman said:
I'll reply to myself ;)Dear Herman, the knife you're looking for isn't green, it's black. And it's not 91mm, it's 84 (even better). Lumberjack-ish yes, but big difference is the serrated blade. Look at the picture I found on your computer... Tip: try to go to bed early for once...

Nice! Have a picture of one in my notes, but no other info.
-
So here's a very unusual one I just got. I thought it'd be interesting to see if anyone could say why it's unusual. It's a Spartan, the most common model, so nothing unusual there. The shrinking scales would indicate that they are made from celluloid (not cellidor) and as such would date the knife to the early 1940s. While very cool, knives from this era aren't super rare - not enough that IMO they belong in this thread. So what is it that makes this knife so rare that I've only ever seen 3 or 4 like it in all my years of collecting?

-
Is that a carbon steel blade?
-
That's it! In fact, all of the tools are carbon steel, not just the main blade. Being from the early 40s this knife would have been made almost 20 years after Victorinox started using stainless steel. However, they did continue to make a small number of Officers Knives in carbon steel into at least the early to mid 1940s. Finding older knives (fiber scales, large screwdriver instead of caplifter) in carbon steel is fairly common, but newer models like this in carbon steel are tough to find.
-
Good spot Reiner.....
Nice one and thanks once again JB
I was going to say brass (coloured) liners - But I guess they are not that rare!

-
Hahahaha,
I called carbon steel then scrolled down......
Its the little things in life that make us happy!
I do look forward to the updates in this thread.
-
I have a few advertising knives now with no shield at all on them. Is this uncommon?
-
Just got this one in, and I really like this one. I have a thing for old knives, Elinox knives, knives with St Christopher inlays, and knives with special tool combinations. This knife is a combination of all four. If it had a bail and a large awl it'd be damn near perfect.
Depending on your perspective, this knife is either a Motorist variant (i.e. Motorist with saw instead of a file) or a Hiker variant (Hiker with technician screwdriver). This knife was a special run for a paper manufacturer located in Nebikon, Lucerne called Pavag AG. Pavag stands for "Papier Verarbeitungs AG", so the full company name was, curiously, "Papier Verarbeitungs AG AG" (Paper Processors Inc Inc). Go figure. Anyway, the website of the successor company (Pavag Folien AG) states that Pavag was Switzerland's first paper mill, started in 1926. This explains the tree on the logo and the choice of wood saw over metal file.
As this knife was custom order, it probably wouldn't have been given either a model name or number. Since everyone likes to call SAKs by a name, I decided to christen this it the "Papetier", French for "paper-maker" as a nod the origins of the company that originally ordered it. I've also listed it as a "Model 8137a" - in this case I just followed the convention of other special Elinox knives at the time like the Motorist (the 8134ma).
This knife was probably made sometime around 1962-1963 right after the switch to the small, concealed awl. This knife is a typical Elinox line knife from the early 60s - all tools are unpolished except the main blade, which by this time was polished just like Victoria blades were (earlier Elinox main blades from the late 1950s were not polished). The Phillips screwdriver lacks the file that would have been present on Victoria line knives of the time, and the saw is still the older 1950s style with the nail nick in it. These were common on large awl Elinox knives from the late 50s and early 60s, but discontinued right around the time that they switched to the small awl, so it's somewhat unusual to see it on a small awl knife.


-
@jazzbass said:
Just got this one in, and I really like this one. I have a thing for old knives, Elinox knives, knives with St Christopher inlays, and knives with special tool combinations. This knife is a combination of all four. If it had a bail and a large awl it'd be damn near perfect.Depending on your perspective, this knife is either a Motorist variant (i.e. Motorist with saw instead of a file) or a Hiker variant (Hiker with technician screwdriver). This knife was a special run for a paper manufacturer located in Nebikon, Lucerne called Pavag AG. Pavag stands for "Papier Verarbeitungs AG", so the full company name was, curiously, "Papier Verarbeitungs AG AG" (Paper Processors Inc Inc). Go figure. Anyway, the website of the successor company (Pavag Folien AG) states that Pavag was Switzerland's first paper mill, started in 1926. This explains the tree on the logo and the choice of wood saw over metal file.
As this knife was custom order, it probably wouldn't have been given either a model name or number. Since everyone likes to call SAKs by a name, I decided to christen this it the "Papetier", French for "paper-maker" as a nod the origins of the company that originally ordered it. I've also listed it as a "Model 8137a" - in this case I just followed the convention of other special Elinox knives at the time like the Motorist (the 8134ma).
This knife was probably made sometime around 1962-1963 right after the switch to the small, concealed awl. This knife is a typical Elinox line knife from the early 60s - all tools are unpolished except the main blade, which by this time was polished just like Victoria blades were (earlier Elinox main blades from the late 1950s were not polished). The Phillips screwdriver lacks the file that would have been present on Victoria line knives of the time, and the saw is still the older 1950s style with the nail nick in it. These were common on large awl Elinox knives from the late 50s and early 60s, but discontinued right around the time that they switched to the small awl, so it's somewhat unusual to see it on a small awl knife.


I love when you post stuff like this! makes me happy! (maybe a little jealous, but mostly happy).
the Awl looks like the cutting surface is larger than current version, can you confirm that? or is it just a trick of the light.
thanks!
-
Magnificent!!!!!
Does the Phillips have a can key slot? -
@jazzbass said:
Just got this one in, and I really like this one. I have a thing for old knives, Elinox knives, knives with St Christopher inlays, and knives with special tool combinations. This knife is a combination of all four. If it had a bail and a large awl it'd be damn near perfect.Depending on your perspective, this knife is either a Motorist variant (i.e. Motorist with saw instead of a file) or a Hiker variant (Hiker with technician screwdriver). This knife was a special run for a paper manufacturer located in Nebikon, Lucerne called Pavag AG. Pavag stands for "Papier Verarbeitungs AG", so the full company name was, curiously, "Papier Verarbeitungs AG AG" (Paper Processors Inc Inc). Go figure. Anyway, the website of the successor company (Pavag Folien AG) states that Pavag was Switzerland's first paper mill, started in 1926. This explains the tree on the logo and the choice of wood saw over metal file.
As this knife was custom order, it probably wouldn't have been given either a model name or number. Since everyone likes to call SAKs by a name, I decided to christen this it the "Papetier", French for "paper-maker" as a nod the origins of the company that originally ordered it. I've also listed it as a "Model 8137a" - in this case I just followed the convention of other special Elinox knives at the time like the Motorist (the 8134ma).
This knife was probably made sometime around 1962-1963 right after the switch to the small, concealed awl. This knife is a typical Elinox line knife from the early 60s - all tools are unpolished except the main blade, which by this time was polished just like Victoria blades were (earlier Elinox main blades from the late 1950s were not polished). The Phillips screwdriver lacks the file that would have been present on Victoria line knives of the time, and the saw is still the older 1950s style with the nail nick in it. These were common on large awl Elinox knives from the late 50s and early 60s, but discontinued right around the time that they switched to the small awl, so it's somewhat unusual to see it on a small awl knife.


Another neat item!

-
@jazzbass said:
Just got this one in, and I really like this one. I have a thing for old knives, Elinox knives, knives with St Christopher inlays, and knives with special tool combinations. This knife is a combination of all four. If it had a bail and a large awl it'd be damn near perfect.Depending on your perspective, this knife is either a Motorist variant (i.e. Motorist with saw instead of a file) or a Hiker variant (Hiker with technician screwdriver). This knife was a special run for a paper manufacturer located in Nebikon, Lucerne called Pavag AG. Pavag stands for "Papier Verarbeitungs AG", so the full company name was, curiously, "Papier Verarbeitungs AG AG" (Paper Processors Inc Inc). Go figure. Anyway, the website of the successor company (Pavag Folien AG) states that Pavag was Switzerland's first paper mill, started in 1926. This explains the tree on the logo and the choice of wood saw over metal file.
As this knife was custom order, it probably wouldn't have been given either a model name or number. Since everyone likes to call SAKs by a name, I decided to christen this it the "Papetier", French for "paper-maker" as a nod the origins of the company that originally ordered it. I've also listed it as a "Model 8137a" - in this case I just followed the convention of other special Elinox knives at the time like the Motorist (the 8134ma).
This knife was probably made sometime around 1962-1963 right after the switch to the small, concealed awl. This knife is a typical Elinox line knife from the early 60s - all tools are unpolished except the main blade, which by this time was polished just like Victoria blades were (earlier Elinox main blades from the late 1950s were not polished). The Phillips screwdriver lacks the file that would have been present on Victoria line knives of the time, and the saw is still the older 1950s style with the nail nick in it. These were common on large awl Elinox knives from the late 50s and early 60s, but discontinued right around the time that they switched to the small awl, so it's somewhat unusual to see it on a small awl knife.


Very nice :)
I found an odd one at the weekend with scissors instead of the saw
Square Phillips with can slot and metal tipped tweezers
Blue scales .... must have been an advertising knife as there is no shield at all
I will take some pics tonight
-
@jazzbass said:
This knife was a special run for a paper manufacturer located in Nebikon, Lucerne called Pavag AG. Pavag stands for "Papier Verarbeitungs AG", so the full company name was, curiously, "Papier Verarbeitungs AG AG" (Paper Processors Inc Inc). Go figure. Anyway, the website of the successor company (Pavag Folien AG) states that Pavag was Switzerland's first paper mill, started in 1926. This explains the tree on the logo and the choice of wood saw over metal file.Hmmm - Does that mean that the company's name is a mix of French 'Papier' and German 'Verarbeitungs' words ???
Strange place Switzerland !!Nice knife as always JB - Thanks for posting
@detron said:
** I love when you post stuff like this! makes me happy! (maybe a little jealous, but mostly happy).**
the Awl looks like the cutting surface is larger than current version, can you confirm that? or is it just a trick of the light.Same here ;)
I compared the awl cutting surface to one of mine and it does indeed look longer - Early version??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
