And so it begins.... (My adventures into Alox!)
-
Syph - I don't recall seeing any pics of a 91mm with the small blade, electricians blade, or hawk bill blade opposite an opener. Is this doable, or is it unique to the 93mm platform?
-
@tommywp said:
Syph - I don't recall seeing any pics of a 91mm with the small blade, electricians blade, or hawk bill blade opposite an opener. Is this doable, or is it unique to the 93mm platform?Nope those don't fit the modern opener spring, its very specific to the tools its used for. It would be possible to put those blades in place of the normal small blade though.
-
Syph - I don't recall seeing any pics of a 91mm with the small blade, electricians blade, or hawk bill blade opposite an opener. Is this doable, or is it unique to the 93mm platform?
Nope those don't fit the modern opener spring, its very specific to the tools its used for. It would be possible to put those blades in place of the normal small blade though.
Thanks, man. After reading your response, I think you actually answered this for me before a few pages back :D
Does anyone know if looking for scissors with no hook would be a good indicator that a 91mm uses the old opener spring. Just curious.
-
Probably but im not sure. Easy to tell by looking at the keyrings though. Thoae old springs dont have a keyring loop like modern ones.
-
Collectors might not want to watch what's next... :D
A fellow contacted me who wanted to turn an XAVT into a user. It's getting a thin down treatment going from a 15 layer to a 9 layer.

-
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
-
I was being super careful to take off a layer at a time and keep them in order... :D




-
:ahhh

-
Ok here we go. Started with these 15 layers ...
- Small blade / Large Knife blade - plain edge
- Metal saw
- Combo tool / watch case opener tool
- Bit Driver and case 1
- Pharmaceutical Spatula
- Pruner blade / electricians blade
- scissors
- wood saw
- 93mm awl / serrated blade
- New mag glass / White LED Light Module
- Fish scaler
- Bit Driver and case 2
- Pliers
- Old mag glass / old phillips
- Can Opener / Bottle Opener
And left with these 8 layers (and also swapped corkscrew to phillips) ....
- Small blade / Large Knife blade - plain edge
- Metal saw
- Pruner blade / electricians blade
- scissors
- wood saw
- 93mm awl / serrated blade
- New mag glass / White LED Light Module
- Can Opener / Bottle Opener




-
That's quite a cool, beastly SAK Syph

Sent from my XT901 using Tapatalk
-
Also a Ti/brass deluxe climber went together too. :D



-
Also very nice

Sent from my XT901 using Tapatalk
-
Yes, wonderful!!!

-
Put the layers you took out back toghether and call it the Leftover SAK...

:D :D
-
@pfrsantos said:
Put the layers you took out back toghether and call it the Leftover SAK...

:D :D
OH they will be going into something. There were 2 CT tool layers in that sucker. I also never had a spatula before. Not sure Id use it, but I like to collect parts and have at least one of each type for reference. :D
-
Put the layers you took out back toghether and call it the Leftover SAK...

:D :D
OH they will be going into something. There were 2 CT tool layers in that sucker. I also never had a spatula before. Not sure Id use it, but I like to collect parts and have at least one of each type for reference. :D
CT layers you say?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
