Got Paracord?
-
Rebel, It is on my iPad now earlier it wasn't. I think it is my iPad pix were slow this morning. So guess it's my bad. :D
-
Hehe you can't trust those cagey iAnythings

-
Mike56 the minion are most excellent!
-
What are you guys using to cut paracord with? I mean when you are finishing ends on a piece and can't use a knife. Is anybody using multitool scissors, etc.? I tried cutting one with my old Micra and I just mashed and mangled the cord...
By the way I think I may have no talent for this. Spent an interruption-filled hour farting around trying to follow directions for one stitch and I got something but it doesn't look it is supposed to.
Any recommendations for easy to learn stitches for lanyards?
-
@rebel said:
What are you guys using to cut paracord with? I mean when you are finishing ends on a piece and can't use a knife. Is anybody using multitool scissors, etc.? I tried cutting one with my old Micra and I just mashed and mangled the cord...By the way I think I may have no talent for this. Spent an interruption-filled hour farting around trying to follow directions for one stitch and I got something but it doesn't look it is supposed to.
Any recommendations for easy to learn stitches for lanyards?
I use Victorinox 91mm scissors for cutting paracord. they work great for me. then I use a lighter to singe them to keep them from fraying.
I recommend Tying it All Together easy to follow and well done videos. he has books as well at Amazon that are mainly just pictures showing step by step instructions.
check this one out as an example
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
What are you guys using to cut paracord with? I mean when you are finishing ends on a piece and can't use a knife. Is anybody using multitool scissors, etc.? I tried cutting one with my old Micra and I just mashed and mangled the cord...
By the way I think I may have no talent for this. Spent an interruption-filled hour farting around trying to follow directions for one stitch and I got something but it doesn't look it is supposed to.
Any recommendations for easy to learn stitches for lanyards?
I use Victorinox 91mm scissors for cutting paracord. they work great for me. then I use a lighter to singe them to keep them from fraying.
I recommend Tying it All Together easy to follow and well done videos. he has books as well at Amazon that are mainly just pictures showing step by step instructions.
check this one out as an example
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
+1 on 91mm Vic scissors
Also, it is just about practice, so you need to do the knots over and over again, and you will eventually get it, trust me, its the only way to go :)
If you want to start easy, I would go with cobra weave aka Solomon Bar, or Crown Sinnet, both have easily followed videos on Youtube
-
RT had brought some paracord some weeks ago and we already used some to creat new shoelaces (the old one threatened to rip or actually did rip) and I tried to make a bracelet out of it. But it got so burly and big it would fall off my (and even RT's) wrist.
Today I used a tutorial out of a magazine called "Tactical gear" to make a bracelet.

The endings needs some more practice though:

I used up a little bit less the 3,5m for this bracelet. The knot to close the bracelet was the hardest part. This wasn't as clearly described as I needed it. RT had to search for an extra YouTube tutorial for that. And another part of the tutorial lacked mentions, as of what to do with a loose loop I had left at the ending.
After third try I finally made it.
Using a future communicator stolen from the NCC-1701
-
Thanks for the encouragement, guys. I didn't see any 91mm SAK that made me want to buy one (no Alox models in that size yet) so I guess I'll just try to find a good pair of scissors. That TIAT is a great resource. I saw that when I started looking into this. Somehow the videos seem simpler than they are and it's hard to use when you're actually trying something. I guess I will just keep at it like you said.
-
@rebel said:
Thanks for the encouragement, guys. I didn't see any 91mm SAK that made me want to buy one (no Alox models in that size yet) so I guess I'll just try to find a good pair of scissors. That TIAT is a great resource. I saw that when I started looking into this. Somehow the videos seem simpler than they are and it's hard to use when you're actually trying something. I guess I will just keep at it like you said.Ok I actually got something done about an hour or so after this post. Will upload pics later when I can find the right cable.
-
This is the first stuff I did. It came out ok, nothing great. It is all snake stitch which is real easy to do and I would recommend it for a beginner. I used it because I like the look of it but it turned out to be a real easy stitch.
Two of the lanyards have a 2 strand diamond knot finish and the other one uses a double Matthew Walker knot or at least my attempt at same. I have since cleaned up the cord ends on the pink lanyard. I am not gay btw, this was for my wife and it goes on the end of her keychain which is an aluminum carabiner. I just didn't have a pair of scissors handy so I cut the ends with a knife at first but then I found some scissors and made the end neater and melted it. No more nasty burned look.
I am still having trouble getting the diamond knot where I want it on the cord but it actually worked out well since what I want to do is cow hitch these around my belt. Later on I need to figure out how to get the knot where I want it so I can do more decorative stuff.


-
To adjust the diamond you loosen the knot and move one of the strands up or down to even up the knot. Move both strands up or down to move the whole knot.
Sent from my iPhone using Tapatalk
-
I've mostly stopped weaving paracord; now I mostly just run it through my multitools and tie a figure eight knot in the end, and then, depending on how long a piece I used, I tie a few more eights or an overhand knot to make a fast lanyard or tail to make it easy to grab from a pocket or a tool organizer.
Sent from my Note 4
-
A simple wrist loop lanyard added to a flashlight for this Labor Day's edc pocket duty, tied with #325 paracord attached to the pocket clip since the light itself doesn't have a lanyard hole, although I've also carried it without the pocket clip and tied a lanyard around one of the flashlight body grooves as an alternative as well...
<a href="https://flic.kr/p/yknGWx" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5733/21222665075_cc54d84172_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Labor Day 2015 Pocket Dump by David Hopper, on Flickr -
Looks great SD!!!!! Remind me what the knot on the end is please!

-
My little guy got a new pair of shoes and bag for the start of the new year of school, and well, we had to make them special, so I replaced all the zipper pulls with paracord a while back, but today I did the same with the shoes, he likes the black/red combo!
JR

-
@SAK Guy said:
Looks great SD!!!!! Remind me what the knot on the end is please!
The finish at the end is a <u>two-strand footrope knot</u>, #783 in 'The Ashley Book of Knots'. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
like me