Boker plus Teck tools
-
@TRUE LIBERTY said:
No phillips head?!?! Makes no sense with that setup of tools they provide. And this video shows how poor of a performer the scissors are compared to a SAK.Probably doesn't help that he keeps using the wrong hand :rofl:
Looks like the scissors need crinking a bit. I'm less worried about the fact that the "Phillips" substitute doesn't open out inline, and more concerned that it has serrations on. I'd need to play with it to see if I felt I could adopt a safe grip for using that implement as a driver
-
@50ft-trad said:
@TRUE LIBERTY said:
No phillips head?!?! Makes no sense with that setup of tools they provide. And this video shows how poor of a performer the scissors are compared to a SAK.
Probably doesn't help that he keeps using the wrong hand :rofl:
Looks like the scissors need crinking a bit. I'm less worried about the fact that the "Phillips" substitute doesn't open out inline, and more concerned that it has serrations on. I'd need to play with it to see if I felt I could adopt a safe grip for using that implement as a driver
Not sure I believe it matters what hand he was using. But maybe someone who has one can do a similar test. I really wanted to like these but the Phillips is probably the number one tool I use.
-
Scissors: That is really sad, I think that is the most popular tool on small pocket knifes with more than just a blade.
Phillips: I will try it out some more and if RT is not going to do the Off-Brand October with it, then I will.Here is some more from my first 24h (I carried it yesterday for a 2-hours hike).
The lanyard attachment is kinda bad: folded in its useless, folded out it adds a very pointy point.
Glass-breaker: Great idea but I don't like it as it pokes me. -
I've tried the scissors on mine on paper, plastic, leather, paracord and microcord, and while they're not as good as Victorinox scissors, they do work, and they're better than Leatherman Juice scissors. And yes it does help to apply a little sideways force to prevent the blades separating as they close.
-
Seems like maybe you guys are using the screwdriver tip on the knife wrong.
How about if you use it while pressing against the back stop, as you'd use a 91mm Vic combo tool on a Phillips?
Or just forget it's there and consider it a wine bottle foil knife? In that capacity, it's better than anything anyone else makes.
Both halves of the scissors moving (aka Wenger) has its pros and cons too: there's no fragile leaf spring to bend or break. It should be fine for snipping threads and less precision tasks, only not good for coupon clipping.
Pokey glass breaker: is it pokey when carrying on the pocket clip too, or just during pocket carry?
It may seem like I'm trying to defend it without ever having handled one, but I'm not. I'm just saying that if you expect it to be just like a Victorinox, that's the wrong attitude. Be open-minded to a different way of doing things and to some different applications.
-
I agree, maybe we should focus on the strenght of that tool (wood shaving etc.) rather than its weakness as screwdriver.
-
@shibafu said:
I've tried the scissors on mine on paper, plastic, leather, paracord and microcord, and while they're not as good as Victorinox scissors, they do work, and they're better than Leatherman Juice scissors. And yes it does help to apply a little sideways force to prevent the blades separating as they close.Good to know. If they ever make it usable for my needs and put a phillips head on there I will get one.
-
Am I the only one who sees the wine foil cutter, and thinks it seems useful for paracord and as an improvised seat belt cutter? I thought a seat belt cutter seemed natural as a pairing with the glass breaker. As a small screwdriver, it seems easy enough to place the hands only gripping the scales, i.e. keeping the fingers totally out of harms reach?
Still on the fence whether I should get one or not, so I'm only throwing out questions here...

-
I like these tools.
Although I can't see how the pocket clip on the number 4 tool could be useful, since the tool is far too wide to fit in a pocket in the orientation required to use the clip.
-
This isnt just a poket clip, its also an Beltclip, so you wouldnt need an Beltcase to carry it, just put in on your belt..
This way i often carryd my Leahtermans, or other Knifes whit Clip..
The Clip and the Blade would be nice to have, and therefore im interestet in the Techtool, but as it dosnt have Tweezers, which you often need in the wild, im stick whit my Swisstool/Böker Griploc Kombo..
But if they make a Techtool 10, whit all these Swisstools XLT Tools, and whit Canopener, i think i will jump in to the Böker.. -
The more I read you guy's comments, the less I like this.
-
The Techtools looks cool, and usefull,
But i spend last yeahr about 120 € in a Swisschamp XLT, the Mother of all Swiss Army Knifes, and 80 € in a Böker Plus Griploc,
Which i booth edc the same time..So i cant see the benefit of the techtool at the moment..
A techtool whit a loocable blade, and all tools of the swisschamp, this would be something which i would like to get me..
-
I can confirm that the blade is good at cutting, bit too good?

Lucky for me my good wife was at hand with the first aid box and first aid trained.
-
Strange, i tought a sharp blade is less dangerous than a not that sharp, because you dotnt need that much force to work whit it so its more under your controll,
But i also got bitten from my Vic XLT when i wantet to open all tools for the pictures,
But there was one of the Blades in the Middle, i think the Prunner blade..
But it was a nice clean cut, it dit bleed a bit, but healt realy fast.... -
A couple things I realized, while watching that first video:
a) The scale material is FAR more durable than anything Victorinox puts out. (and nice-looking too!) The nylon with rubber inserts on the new Soldier is not bad, but the one on the Boker looks like it'd never break.
b) The scales look to be attached with temper-resistant Torx screws = easier modding or servicing. I know some of the modders who work on Alox Vics choose to replace the rivets with round-headed fasteners like that.
Vic pliers-based MTs are often criticized (compared to Leatherman and SOG, for example) for using rivets instead of fasteners that can be removed without destroying anything. It's kind of a trade off: the rivets are more permanent and durable. But using rivets just seems to make the whole product a bit more .... disposable.
-
@matzesu said:
Strange, i tought a sharp blade is less dangerous than a not that sharp, because you dotnt need that much force to work whit it so its more under your controll,
But i also got bitten from my Vic XLT when i wantet to open all tools for the pictures,
But there was one of the Blades in the Middle, i think the Prunner blade..
But it was a nice clean cut, it dit bleed a bit, but healt realy fast....Sharp blades are safer when using the knife with good habits. I think we have all slipped up from time to time.
I used to tease my wife for cutting herself often. I gave her tips on how not to, which she usually ignored. I proudly told her that she should listen to me, as I haven't cut myself in years.
Of course, you know what happened next.
A couple weeks later, I was cutting apples with a plain-edged steak knife. (large paring knife) I had put the blade under the palm of the hand that was about to cut the apple in half, while that hand was holding the apple at the edges.
The only problem was that I forgot to tuck in my pinky finger of the hand that was holding the apple, and the hand was blocking the view of the finger. I was rushing a little (2nd mistake) so when I forcefully brought that blade down, it slice my pinky finger pretty well. Blood everywhere; soaked through the band-aid, etc.
Then, later that same day, I cut myself again. I don't even remember how. But what a shameful day it was! My wife reminded me how ironic it was that "the expert" (she made air quotes there) who spends all this time thinking about knives and reading knife fora cut himself twice in one day.
Karma's a bitch. :-[
-
Strange, i tought a sharp blade is less dangerous than a not that sharp, because you dotnt need that much force to work whit it so its more under your controll,
But i also got bitten from my Vic XLT when i wantet to open all tools for the pictures,
But there was one of the Blades in the Middle, i think the Prunner blade..
But it was a nice clean cut, it dit bleed a bit, but healt realy fast....Sharp blades are safer when using the knife with good habits. I think we have all slipped up from time to time.
I used to tease my wife for cutting herself often. I gave her tips on how not to, which she usually ignored. I proudly told her that she should listen to me, as I haven't cut myself in years.
Of course, you know what happened next.
A couple weeks later, I was cutting apples with a plain-edged steak knife. (large paring knife) I had put the blade under the palm of the hand that was about to cut the apple in half, while that hand was holding the apple at the edges.
The only problem was that I forgot to tuck in my pinky finger of the hand that was holding the apple, and the hand was blocking the view of the finger. I was rushing a little (2nd mistake) so when I forcefully brought that blade down, it slice my pinky finger pretty well. Blood everywhere; soaked through the band-aid, etc.
Then, later that same day, I cut myself again. I don't even remember how. But what a shameful day it was! My wife reminded me how ironic it was that "the expert" (she made air quotes there) who spends all this time thinking about knives and reading knife fora cut himself twice in one day.
Karma's a bitch. :-[
That sounds familiar in all aspects of your story.
-
This is from the Sanrenmu web site. Looks near identical, I'm guessing they are the OE manufacturer. But the tool selection is a bit different. It'll be cool if they make some different variations from the Boker ones for the Chinese home market.

-
Ah, the joys of having production placed in China: Competition with yourself.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login