sog paratool owners club
-
You can get them from the SOG website.
Nate
That's us mobile -
I forgot about this thread.
I'm in...

Nate
That's us mobileShop Toad approved!

[emoji106]
I my have to nick name the Shop Toad to SOG Toad...LOL!Nate
That's us mobile -
@ducttapetech said:
You can get them from the SOG website.Nate
That's us mobilethanks nate you are all over helping me today

color me confused though, I thought the sog scissors wouldn't fit, I guess it's because they are a little long and need to be trimmed?
-
Yeah I one of the few SOG fan here...lol!
They should fit right in as far as I know. They are no longer than the file or knife blade.a couple of others here have put them in the Paratool. -
Just picked up an older paratool w/ blackie collins sheath off of ebay. I really like it and will carry it over some of my other multi-tools because the sheath is so dang nice, and it has a leatherman style can opener. Why did SOG drop that style of can opener for the SAK style one?
-
Count me in, just picked this up off of e-bay...Pat pend. model





-
I grabbed a couple of old ParaTools from eBay for a decent price. They were filthy and with some surface rust but after a thorough cleaning they are like new! The old construction and tools feels so much better than the new one. Sturdier yet smoother to operate at the same time.




-
Will the Paratool fit in the SOG small leather sheath ?
-
Will the Paratool fit in the SOG small leather sheath ?
It fits, but when you close the pouch the attachmentring pushes against the leather, so I think it'll be ruined quickly.. :)
Thanks AHB, Does the sheath close easily or does it stretch over the lanyard ring ?
-
Will the Paratool fit in the SOG small leather sheath ?
It fits, but when you close the pouch the attachmentring pushes against the leather, so I think it'll be ruined quickly.. :)
Thanks AHB, Does the sheath close easily or does it stretch over the lanyard ring ?
It stretches quite alot, so probably not the best choice.. :)
-
Scored a early Para tool with Blackie Collins Sheath.




-
Very nice!
-
SCORE!
Sent from my Z797C using Tapatalk
-
I have joined the club.
I got a good deal on one that had modded (added saw, strap cutter), but apparently never actually used. Perfect shape, not a scratch on it, no sign the blades or drivers had ever been used.Pros: Fit and finish, tool machining, unique design, good weight and size, high tool density.
Cons: poor tool retention, plier mechanism makes extracting handle tools or closing the tool relatively slow.
Some preliminary thoughts:
I love the fit and finish. All the tools are precisely machined, everything fits together nicely, tolerances are tight. I love the "Victorinox style" high polish finish. Great for rust resistance and just makes the tool feel high quality. I much prefer the polish to the matte finish of some other tools. The tool has great weight and high tool density for its compact form factor.
I must salute SOG for using hex bolts for the pins. Adjusting tension, or swapping tools, is trivial compared to a Leatherman or Gerber.
I got this mainly because I was intrigued by the plier mechanism. It is stiff enough that it stays open when you want it open, closed when you want it closed. I don't know if this will degrade over time though. You can open the tool one handed but it is slow. Closing the tool is actually annoying. You need to line up the handles and close them symmetrically, so that the locking tabs on the handles line up. These hold the tool closed (no wobble in the handles when closed) but it takes far more mental effort to close than just about any other multi tool.
So far, I've tried it on some nuts here and there and I don't think this tool will fold up on me. There is no play in the plier pivot, and I have no complaints about the plier head. Pretty standard. I have not had a chance to try the cutters. The pliers are quite comfortable to use, no sheet metal cutting into your palms.
While the plier retention is excellent (which was a worry given its unique design), the handle tool retention is very disappointing. Honestly, not much better than many low grade Chinese multitools. The handles seem to be made of high-quality sheet steel of decent thickness, so I am not sure why the spring retention is so weak. Two possible factors:
-
Perhaps the spring tab is cut too long (and it therefore too flexible)? I am not sure. My PSTs are made from thinner sheet metal but the tool retention is outstanding (maybe too stiff!).

-
The handle tools don't actually have a flat part that engages the spring. Think of how that flat bit that clicks into place on a slipjoint knife, or on the PST tools. Instead, these tools (which are interchangeable with the locking Power-Lock) have this little circular tab that doesn't really seem to engage with the spring at all. A picture might help explain what I mean:

In fact, after using the pliers, the tools become loose in the handles and can "stick out", which is dangerous. I could easily see a careless person cutting themselves on the protruding knife after using the pliers for a while. I supposed adjusting the tension on the pins might fix this.
Design wise, the Leatherman Wingman/Sidekick have a similar problem but they seem to angle the spring in such a way that tool retention is far better.
The poor tool retention makes it hard to recommend this tool for more than light use despise the obvious care that went into its manufacture, which is a bummer.
As for the handle tools themselves:
[li]The knife is fine. The chisel edge on a tool that otherwise oozes quality is disappointing tough.
-
The wood saw is not as a good as Victorinox or Leatherman, but is more than adequate. Did just fine on some wood from the backyard.
-
The file is excellent. Very aggressive teeth on both sides. It reminds me of the Gerber file, but with a notching underside as well. One gripe is that the teeth do not extend all the way to the end (which is also a gripe with Victorinox and Gerber files). In fact, the file has a beveled flat tip. Is this intended to be a large flathead driver? If so, that is pretty boneheaded--it would be inviting a real headache for SOG's warranty department.
-
The awl is great. Very sharp, very robust. Only weakened by poor retention.
-
The strap cutter is interesting. Honestly, I would have rather this was made a short tool (with just the hook tip), leaving room for a regular serrated blade in its long slot.
-
The can opener is fine. On my paratool it is in the Victorinox style, with a small driver tip. I see older paratools have a Wenger style hawkbill opener, which in my experience is just a better can opener. On a tool with so many drivers I am unsure if the added small driver tip (with no reach) is worth compromising the opener functionality.
-
The large driver is unremarkable (what is there to say?) and seems like it could handle light prying tasks.
-
The medium driver is fine. Not sure the tool needed it to be a bottle opener as well, this seems like functionality that could have been combined with the can opener.
-
The phillips driver is precisely molded and has a nice long shank. It does seem a tad soft though, just trying it out on some screws around the house.
Overall, it is a fun tool that I enjoy playing with. Unfortunately, the poor tool retention and slowness of tool extraction make it hard to recommend. :-\
-
-
That flat bit on the end of the file is in fact a screwdriver. I think its interesting you liked the file. Many others (myself included) think SOGs files are just terrible. Have you actually used it yet?
-
Between my wave and my SOG, the SOG goes more places with me. My only complaint is the weight. I wish there was a 3/4 size one with the same design and features.
Sent from my XT1254 using Tapatalk
-
3/4 the size of a Paratool? That seem a little small given that it is already a light tool.
The SOG files seem to be variable, ranging from nice and aggressive to little more then a textured piece of metal.
-
@sLaughterMed said:
That flat bit on the end of the file is in fact a screwdriver. I think its interesting you liked the file. Many others (myself included) think SOGs files are just terrible. Have you actually used it yet?I was a bit wondering about that too, I guess it's an older model (still made in the US?) and that could make the difference?
-
@sLaughterMed said:
That flat bit on the end of the file is in fact a screwdriver. I think its interesting you liked the file. Many others (myself included) think SOGs files are just terrible. Have you actually used it yet?The SOG files seem to be variable, ranging from nice and aggressive to little more then a textured piece of metal.
I tried it on a piece of wood in the backyard and it did well. It has pretty aggressive teeth.
The file on my powerlock is garbage though. Textured metal indeed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
