What did you use your Sak on today?
-
I use the small screwdriver on my camper to open the scales on my new but used Climber :) And the toothpick to clean and oil were i can reach :)


-
My grandfather and I used JB Weld to repair a broken knob on the screen door, and I first tried my Craftsman's Phillips head driver, the T-handle made it too bulky to fit in there. So, I tried the flat blade screwdriver on the combo tool of the secondhand Wenger Pocket Tool Chest that arrived today. It fit in just barely. I think I'm beginning to like this little thing more and more.
-

Sent from my D6653 using Tapatalk
-
Sweety and my first YT video!

Just how I opened a cheap lock with a toothpick.
https://www.youtube.com/watch?v=M2fQ4ImCAAwAny guesses? :D
The tweezers? ???
I did also manage it with the tweezers today, but we just tried one version on video. ;)
-
I used my Alox bantam to cut some paracord
Using a future communicator stolen from the NCC-1701
-
UPS Install

Sent from my D6653 using Tapatalk
-
The old sliding bolt in the door slip-lock wouldn't slide when the handle turned so couldn't get the door open. Took out the hinge-pins to remove the door but the pin-barrels were in the way and the door couldn't be removed. With the sharp tip of the reamer on my Huntsman was able to work the bolt sideways enough to open the door to replace the bolt.
Used this EDC SAK many times recently remodeling: sawing the square corners out where the circular saw stopped, sawing in tight quarters against a wall, sawing a notch in a concrete form for the rebar to protrude to its weld, trimming frazzles from the edges of new carpet with the scissors... -
I used the small tip of the can opener on my Recruit to fix the visor on the company car I drive.
-
Today uses :D



-
@J Mackrel Jones said:
Used this EDC SAK many times recently remodeling: ... sawing a notch in a concrete form for the rebar to protrude to its weld...
Did anyone else cringe when he read that? ^
That's got to be one. dull. saw.
A concrete form is the wood structure used to contain and shape poured concrete. There would be no reason the SAK saw couldn't handle that kind of wood. The notch was cut into the wood to allow for pieces of rebar to have clearance. This would have been done prior to any concrete being poured.
-
I used my Victorinox Manager's scissors to unlock the door of the ATM after the bank manager broke the key inside the lock...
-
@Toolslinger said:
A concrete form is the wood structure used to contain and shape poured concrete. There would be no reason the SAK saw couldn't handle that kind of wood. The notch was cut into the wood to allow for pieces of rebar to have clearance. This would have been done prior to any concrete being poured.Ah, OK. I didn't realize that's what those frames were called. :-\
-
I used my Victorinox Manager's scissors to unlock the door of the ATM after the bank manager broke the key inside the lock...
I never realised it was that easy :P
-
Used the can opener to open a can of tuna fish and a can on fruit cocktail for lunch. Used the knife blade to spread the tuna on ritz crackers.
-
@Sakpan74Gr said:
I used my Victorinox Manager's scissors to unlock the door of the ATM after the bank manager broke the key inside the lock...How exactly do 58mm sak scissors open an ATM?
Edit: sake --> sak stupid autocorrect
-
I used my Victorinox Manager's scissors to unlock the door of the ATM after the bank manager broke the key inside the lock...
How exactly do 58mm sake scissors open an ATM?
I think the important part is, that there was a broken off key inside the lock!
-
As modified pliers? I'm curious myself!

-
I used my Victorinox Manager's scissors to unlock the door of the ATM after the bank manager broke the key inside the lock...
How exactly do 58mm sake scissors open an ATM?
The key broke and stayed inside the lock, with only a millimeter of the broken part protruding from the lock. Pliers couldn't reach it to grab it, so only scissors could grab it and very gently twist it to open the lock, and so the outer door.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
