First impressions: The Nutter by Full Windsor (Bike Tool)
-
more images


-
Nice write up, thank you.

-
Zoid is right, nice write up. How do you like the Urban 8, did you try to change a tire with it?
-
@lowtech said:
Zoid is right, nice write up. How do you like the Urban 8, did you try to change a tire with it?I like the Urban 8 (have it now a year or so) and used it to change tires.
PRO
- 15mm wrench + 2 tire levers (all you need to change a tire)
- 4/5mm allen, with those you can adjust more or less everything on your bike
- Cheaper than the Nutter (IIRC its about 20USD)
- You can buy only the small lever (if you loose it)
CON
- Tip of the main lever (the metal one) is a bit thick)
- Tool itself is unnecessarily massive and as a consequence heavy
-
Thank you!
I was thinking about adding one to my load bike - It would add everything I need to do roadside tire repairs or basic adjustments, especially in combination with a MP 600 or SAK I usually carry.The weight is not much of a concern with this bike... Might be different on a roadbike.

-
Thanks for the write up. The imperfection in the steel seems it could just be something getting in the way when the finish was applied, at least by the pic
-
@lowtech said:
Thank you!
I was thinking about adding one to my load bike - It would add everything I need to do roadside tire repairs or basic adjustments, especially in combination with a MP 600 or SAK I usually carry.The weight is not much of a concern with this bike... Might be different on a roadbike.
The weight is not a concern at all... it's just unnecessary
Two things, on the pro side you can supplement it with whatever bits you need. On the con side, like all these designs they cannot reach all the places. E.g. it cannot tighten the screws that hold my baggage rack.
If you anyway carry a MT and/or other tools why not get a
LEZYNE SABRE TYRE LEVER + a regular tire lever

That probably works better (although its not cheaper and you loose the bits). -
@styx said:
Thanks for the write up. The imperfection in the steel seems it could just be something getting in the way when the finish was applied, at least by the picIt's not a pry-bar so I seriously doubt it will affect performance BUT it goes together with the general feel that they are starting to cut corner in production to increase profit margin. They used to have good reviews on quality and finish and I got the impression they are slacking now.
-
So what is in your bike kit?
-
I'm a firm believer in MAINTENANCE over repair.
Once a year I replace tires and tubes (and check everything, I also replace the break cables every two years). Commonly the back tire is through and the front tire would still last a couple of month but I like to do all at one time. The tubes I replace as rubber is not known to handle temperature differences well (I ride my bike winter and summer more than 100km a week). Also I don't have a car and a set of tires (Stab proof Continentals only for me) cost less than a parking space for a car would cost per month. So, I can't remember when I had a flat on my main bike (I recently had one on my second bike where I don't do maintenance. And it was a storage damage, the valve was ripped out).
As I always go by bike, so I have the bike gear in my regular kit (being prepared is still a good idea even with diligent maintenance). Now this will sound familiar:
It consists of 5 items, one of them is fairly obscure... can you guess them?
Will take a picture tonight

-
So what is in your bike kit?
I'm a firm believer in MAINTENANCE over repair.
Once a year I replace tires and tubes (and check everything, I also replace the break cables every two years). Commonly the back tire is through and the front tire would still last a couple of month but I like to do all at one time. The tubes I replace as rubber is not known to handle temperature differences well (I ride my bike winter and summer more than 100km a week). Also I don't have a car and a set of tires (Stab proof Continentals only for me) cost less than a parking space for a car would cost per month. So, I can't remember when I had a flat on my main bike (I recently had one on my second bike where I don't do maintenance. And it was a storage damage, the valve was ripped out).
As I always go by bike, so I have the bike gear in my regular kit (being prepared is still a good idea even with diligent maintenance). Now this will sound familiar:
It consists of 5 items, one of them is fairly obscure... can you guess them?
Will take a picture tonight

Chocolate, alcohol, lego figures, coin, magnifying glass.

-
Well I haven't done anything with my bike in years so maybe I should look into it.
As for the items:
cheese, bacon, bread, sak, 2CHF -
Here is the kit with a Pioneer for size:
Safety quick spanner (To remove the wheel)
2 mini tire levers (one with hook)
Sandpaper
Self-sticking patch
-
Etherealicer, I guess I was just looking for an excuse to buy the Topeak Urban 8... ;)
A "standard" set of tire levers, a "Knochen" (wrench with multiple obenings in ball-like ends) and some patches are all I need in addition to teh Tools I do carry in my work bag anyways...
The Lezyne lever/wrench looks very nice. I´ll have a look in the bike parts box and think about a tire repair kit.I am with you on the topic of maintenance and am sure except of a flat, not much should happen to the bike, but I like to be prepared and have basic tools with me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login