Leatherman REV.
-
You got my hopes up when you said non-locking! But I see the knife blade locks and you meant only the drivers. I will continue to wait for a good, full-size multitool that is EDCable here :(
You could bend or cut off the liner lock on the blade...
I'm surprised that no one makes UK-legal full size MTs. Seems like an untapped market...
There was the Kick, which I loved, but alas, no more. I really wish they'd bring the zytel family back.
-
@sawman said:
There was the Kick, which I loved, but alas, no more. I really wish they'd bring the zytel family back.Even the Kick is in a grey area for UK law due to the inside-opening tools. If, as you typically would, you open the handles, open the blade and then close the handles again to use it, the blade can no longer close. To meet the relevant definition in UK law it must be "readily and immediately foldable at all times simply by the folding process." AFAIK no-one has tested in court whether a tool of this type meets that definition, so we don't know for sure, but it looks doubtful.
There are plenty of cheap no-name multitools with non-locking, outside-opening blades but I've yet to find one that is any good.
Removing the lock on a liner-lock isn't much good, as then there's nothing at all to stop the blade swinging around freely. A backlock is easier to modify into something like a slipjoint but few multitools have backlocks.
-
There was the Kick, which I loved, but alas, no more. I really wish they'd bring the zytel family back.
Even the Kick is in a grey area for UK law due to the inside-opening tools. If, as you typically would, you open the handles, open the blade and then close the handles again to use it, the blade can no longer close. To meet the relevant definition in UK law it must be "readily and immediately foldable at all times simply by the folding process." AFAIK no-one has tested in court whether a tool of this type meets that definition, so we don't know for sure, but it looks doubtful.
There are plenty of cheap no-name multitools with non-locking, outside-opening blades but I've yet to find one that is any good.
Removing the lock on a liner-lock isn't much good, as then there's nothing at all to stop the blade swinging around freely. A backlock is easier to modify into something like a slipjoint but few multitools have backlocks.
Why not mod a bladeless MT and add a slippy...
-
@Etherealicer said:
Why not mod a bladeless MT and add a slippy...A bladeless tool would be a good start, any suggestions? I know Leatherman used to make a knifeless Fuse but that hasn't been available for a while.
-
Why not mod a bladeless MT and add a slippy...
A bladeless tool would be a good start, any suggestions? I know Leatherman used to make a knifeless Fuse but that hasn't been available for a while.
I would suggest the switchplier. Replace the blade with scissors or socket adapter or whatever you want. It has a really great frame for a bladeless mt.
add: I've had two fuses now and after using both the fuse and switchplier I would chose the switchplier. Very compact and simple to swap tools out of.
-
@Demel said:
I would suggest the switchplier. Replace the blade with scissors or socket adapter or whatever you want. It has a really great frame for a bladeless mt.add: I've had two fuses now and after using both the fuse and switchplier I would chose the switchplier. Very compact and simple to swap tools out of.
Thanks for the tip, I will check that out.
-
I find it difficult to get past the super cheap feeling of this tool.
-
If they put some replaceable cutters on this like the Rebar or Super Tool, it would have some potential.
-
There was the Kick, which I loved, but alas, no more. I really wish they'd bring the zytel family back.
Even the Kick is in a grey area for UK law due to the inside-opening tools. If, as you typically would, you open the handles, open the blade and then close the handles again to use it, the blade can no longer close. To meet the relevant definition in UK law it must be "readily and immediately foldable at all times simply by the folding process." AFAIK no-one has tested in court whether a tool of this type meets that definition, so we don't know for sure, but it looks doubtful.
There are plenty of cheap no-name multitools with non-locking, outside-opening blades but I've yet to find one that is any good.
Removing the lock on a liner-lock isn't much good, as then there's nothing at all to stop the blade swinging around freely. A backlock is easier to modify into something like a slipjoint but few multitools have backlocks.
I made a "Kickass" to meet California's school regulations, /post/1120546
Of course it can be bladeless if I wanted to.The PowerDuo has a lockback OHO blade, maybe you can convert it to slip joint.
-
I am very tempted to get one of these ASAP, hopefully as a treat from my other half >:D
-
@scootnfast said:
I am very tempted to get one of these ASAP, hopefully as a treat from my other half >:DI've been stealing my wife's change to fund this little bugger. My better half will never know hehe.
-
Are those wirecutters on the Revs jaws anvil style like on the Sidekick/Wingman, or are they bypass cutters that leatherman puts on most of their tools? By itself the Rev looks pretty lackluster, but I see some potential for mod fodder.
-
@sLaughterMed said:
Are those wirecutters on the Revs jaws anvil style like on the Sidekick/Wingman, or are they bypass cutters that leatherman puts on most of their tools? By itself the Rev looks pretty lackluster, but I see some potential for mod fodder.It is bypass cutter, but for whatever reason this new pliers design led to wide spread handles.
-
Just wanted to jump in here and note that there's a bladeless version of Gerber's MP600.
-
Well I had to see this tool for myself and just ordered one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login