Bike porn thread
-
So I'm pretty pumped and have nobody else to share with, I know there's some fellow bike fans here so here I am. Spend basically all day getting bikes today, drove up into New Hampshire to meet a guy and pick up two frames. A 2004 Cannondale R600 CAAD5 frame with Campy headset and carbon fork. And a 2005 Specialized S-Works Epic frame still sporting the complete XTR drivetrain and Fox brain rear shock and a few other parts. But by and far the best part was the price..... FREEEEE!!!!!! :ahhh :ahhh :ahhh.
I know it's the wrong way to look at it, but these are bikes which went for 1200+ and 4500+ when new and all together this guy just didn't want anymore. I'm so pumped.
The last pick up was 25 bucks for a vintage Lotus 3000M Pro series mountain bike with Rock Shox Quadra forks and what ended up being one of Suntours last respectable MTB component groups, rounded out with Ritchey rims. She is in much rougher shape than the two others, but 25 isn't exactly bank breaking.
And 9 used, but usable tires.
-
Remember to show us some pics when you fix them up! Or will you take them apart for parts?
I am thinking about doing little upgrades to the load bike I got for work... Seems we can´t stop tinkering.
Will a new rear derailleur improve on shifting? I have a basic Shimano 7 Speed with a Grip Shift and downshifting is a bit poor. If I slacken the cable, upshift is poor.
Then I´m thinking about replacing teh big Grandma saddle for something fitting my anatomy better - Any tips on a good saddle shape for a bike whwere you sit upright?
The most expensive Idea I have is modifying a Magura Hymec hydraulic Clutch conversion for cable operated Motorcycle clutches to actuate the front drum brake. Most of the force at the break lever is eaten up in teh long cable with multiple bends. I´d like to improve stopping power. -
Sounds like you got some great bikes tyere higgins

thomas im not a fan of gripshifts,had a few back in the late 90's and they never always worked well,I prefer shimanos rapid fire,always seem too work well,

-
@lowtech said:
I am thinking about doing little upgrades to the load bike I got for work... Seems we can´t stop tinkering.
Will a new rear derailleur improve on shifting? I have a basic Shimano 7 Speed with a Grip Shift and downshifting is a bit poor. If I slacken the cable, upshift is poor.
Then I´m thinking about replacing teh big Grandma saddle for something fitting my anatomy better - Any tips on a good saddle shape for a bike whwere you sit upright?
The most expensive Idea I have is modifying a Magura Hymec hydraulic Clutch conversion for cable operated Motorcycle clutches to actuate the front drum brake. Most of the force at the break lever is eaten up in teh long cable with multiple bends. I´d like to improve stopping power.Good quality PTFE lined housing and new inner cables should fix the shifting problems but if not then, as Zed says, Shimano STI levers would probably be better. Gripshift always felt a bit woolly and imprecise to me.
Try to find some compressionless housing for the front brake, should help with power and lever feel. Though a cable operated drum is never going to be as good as a hydraulic disc, for example.
-
Wow you really did score massively there mate :o
Sent from my K013 using Tapatalk
-
I am thinking about doing little upgrades to the load bike I got for work... Seems we can´t stop tinkering.
Will a new rear derailleur improve on shifting? I have a basic Shimano 7 Speed with a Grip Shift and downshifting is a bit poor. If I slacken the cable, upshift is poor.
Then I´m thinking about replacing teh big Grandma saddle for something fitting my anatomy better - Any tips on a good saddle shape for a bike whwere you sit upright?
The most expensive Idea I have is modifying a Magura Hymec hydraulic Clutch conversion for cable operated Motorcycle clutches to actuate the front drum brake. Most of the force at the break lever is eaten up in teh long cable with multiple bends. I´d like to improve stopping power.Good quality PTFE lined housing and new inner cables should fix the shifting problems but if not then, as Zed says, Shimano STI levers would probably be better. Gripshift always felt a bit woolly and imprecise to me.
Try to find some compressionless housing for the front brake, should help with power and lever feel. Though a cable operated drum is never going to be as good as a hydraulic disc, for example.
The cables are - like the whole bike - quite new, in fact it was just in it´s initial inspection. I thought maybe a better derailleur would work more exactly and with less play? I know about the limitations of a front drum, but I feel it is not performing as good as it can because of teh long and curved cable. Upgrading is not an option at the moment, the bike belongs to the company and I don´t want to spend that much money on a new fork, hub with generator and brake when maybe just the hydro conversion could do (I hope to be able to source most parts used).
But it´ll be some time anyways until I find time to tinker with the bike. -
Good quality cables can make a huge difference, what rear derailleur is it thomas only 7spd? I use shiman deore rear mechs on both my mtb's and they work a treat
cannondale jekyll has a 9spd cassette and my othe mtb has a 8spd works well on both, 
-
Could it just be a bit of cable stretch and bedding in then? A tune-up and a bit of lube may cure it. In my experience, the cheaper Shimano stuff (including the 7/8 speed kit), while not as precise as the higher end groups works just as well.
-
My previous bike had 7 speed stuff on it and I had no issues with it.
-
Oddly i had less issues with 7spd than i did with 8-9spds
-
Another one today, 86? Schwinn Tempo with Columbus Tenax frame and full Shimano 105 kit. All for 25 bucks. I'd gladly share pics, which ones are you guys interested in checking out? But I second the replacement of the grip shift. They're just too sloppy to ever really shift correctly.
-
We want too see them all mate :D shimano 105? Possibly later than 86

-
Fettling fail.

You know those ideas that seem great at the time and even though you realise that it's going to take a while (like two or three evenings in the shed) you get on with it anyway? But then it turns out that this part isn't compatible with that, and when you fit the other bit it rubs something else and it takes you an hour to feed the cable through the frame because you've had to re-do it four times because you keep forgetting something then you need to make a spacer to move some parts further over because the people who designed the fourth bit didn't think anyone would be stupid enough to try to fit it to that other bit and then you need to go and buy some Sugru and some other parts and remove some bits that should be useful and it turns into a job that will take two weeks to finish properly. That. :'(
-
@hiraethus said:
Fettling fail.
You know those ideas that seem great at the time and even though you realise that it's going to take a while (like two or three evenings in the shed) you get on with it anyway? But then it turns out that this part isn't compatible with that, and when you fit the other bit it rubs something else and it takes you an hour to feed the cable through the frame because you've had to re-do it four times because you keep forgetting something then you need to make a spacer to move some parts further over because the people who designed the fourth bit didn't think anyone would be stupid enough to try to fit it to that other bit and then you need to go and buy some Sugru and some other parts and remove some bits that should be useful and it turns into a job that will take two weeks to finish properly. That. :'(
Been there. Done that. Revisited often...

-
@hiraethus said:
Fettling fail.
You know those ideas that seem great at the time and even though you realise that it's going to take a while (like two or three evenings in the shed) you get on with it anyway? But then it turns out that this part isn't compatible with that, and when you fit the other bit it rubs something else and it takes you an hour to feed the cable through the frame because you've had to re-do it four times because you keep forgetting something then you need to make a spacer to move some parts further over because the people who designed the fourth bit didn't think anyone would be stupid enough to try to fit it to that other bit and then you need to go and buy some Sugru and some other parts and remove some bits that should be useful and it turns into a job that will take two weeks to finish properly. That. :'(
Yep, happens to me all too often. May I ask what happened?
-
My best bad combo was combining shimano linier type brake levers with canterlever brakes
not a good combo 
-
@Higgins617 said:
Yep, happens to me all too often. May I ask what happened?Ha, I've fixed it now so I'm not feeling so sore about it. :D
Wanted to convert my Cannondale Synapse from 2x11 into a fixed gear, as I find it much nicer to ride than my current fix, with an eccentric bottom bracket to go in the BB30 shell. So I took the rear wheel from my steel fixed gear (Surly 135mm Ultra New fixed/disc hub, 53mm chainline), a Deore HTII MTB crank (170mm long, 53mm chainline to the outer ring with a 44T big ring, just right for the gear size I want) and a Wheels Manufacturing eccentric BB30 for Hollowtech II axles.
Took the FSA/BB30 cranks and bearings out of the Synapse, removed the gears and internal cabling, noting that the internal cable guide for the derailleurs and rear brake protruded into the BB shell. Fitted the eccentric, fitted the cranks (loosely, the axle was too long for the eccentric BB which is why I had to make a new spacer), fitted the rear wheel and loosely fitted the new chain. Rotated the eccentric in the frame and CRUNCH, broke the cable guide and pushed it out of position so the rear brake stopped working.
smurf.
Tried a bunch of different sized cogs and the chain with and without a half-link to see if I could get the BB in a position that would allow me to tension the chain and still use the internal cable routing for the rear brake. No joy. Ordered a replacement cable guide for the BB, some stick-on hose guides and some Sugru so I could put it all back together if I needed, and plug the cable holes in the frame.
Mulled it over for a day, and decided that the best fix for now would be to run with just a front brake. Not perfect, but it'll do for now, until I can come up with a tidy way of routing the rear brake cable. Finished it up last night - removed the rear brake, slopped loads of anti-seize paste onto the BB and the eccentric actually works really well and I can tension the chain nicely - it almost looks like it was meant to be like that. Going for a test ride this afternoon, hopefully.
@Zed said:
My best bad combo was combining shimano linier type brake levers with canterlever brakes
not a good combo 
Been there too. :D
-
@Zed said:
My best bad combo was combining shimano linier type brake levers with canterlever brakes
not a good combo 
If by linear you mean the new V brake style, I've done it too. Soooooo much leverage. Lived with it for a while on a bike I threw together with spare parts, not a bad thing if you like locking up your wheel lol.
But here are some of the steeds that have passed through my hands, and one that's still here, pic heavy sorry.
Nicest first, though a terrible pic. 1978ish Trek TX700 touring frameset made of Ismurfawa 022 tubing and Suntour Vx everything, save for the Zues calipers and levers. Too small for me though :'(

Scott Windriver, Tange Infinity frameset, junk parts

Haro V-series, nice entry level ride. I was a bit fond of it

Univega Alpina 550 with Shimano STX derailleurs, bike that got me started with flipping

Fuji Sandblaster, entry level bike that someone put a full vintage Deore group on. Wish I kept the components.

Univega Supra Sport with Suntour ARX derailleurs

"Specialized Crossroads". This one was interesting. Pulled frame from trash, built up with parts off a 70s Gitane with a bad frame and a roadmaster, rode and shifted way too well given the hackery that went into making it, sold it for much less than it's sentimental value to me lol

Giant RS920, impossible to find information on the RS bikes. Nice lower-mid range bike with Suntour indexed accu-shift stuff

Giant Boulder, every single thing on it was Shimano Deore LX. I have to assume one of the first rapidfire set ups. Shifted unbelievably crisp.

Cannondale CAAD5 frame with Campy headset that was being given away on craigslist....

Lotus Pro-Series 3000M, cool vintage Suntour mountain components and one of the first Rock Shox(frozen of course)

Schwinn Tempo with Columbus Tenax frameset and full Shimano 105 group, if it was less crusty I probably would have kept it for myself


2005 Specialized S-Works Epic frameset with full XTR drivetrain intact, included for free with the Cannondale frame. Being built up for my dad. WHY WAS THIS FREE!?!?




1991 Trek 2300 Pro Composite. Used to have full Shimano 600 Tri-color group, which would have been really cool. Now it doesn't.

-
Question for you guys, I just picked up this 1988 Specialized Hardrock Comp that I expected to sell. But the more I have it sitting here the more I want to keep it. Even rode it to class today instead of my usual commuter.....
So here's the question, do I wash her up and send her on her way.... Orrrrr do I delve into the deep dark hole that is bike restoration and blow the whole thing apart polishing and repacking everything from square one and keep it for myself.
It looks to lean more towards a touring type bike instead of what I've come to think of a mountain bike as. We're original mountain bikes more for heavier/off road touring rather than just trail riding? Thankfully, its a Hardrock from before they became the lowest of the low in Specialized's lineup and it sports very functional Suntour XCE components, it even predates 7 speeds.
What do you think?

-
Hey Higgins this is what trail bikes looked like before suspension and disk brakes,I would clean it up and get it off road

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login