Is it me!!!!
-
@Etherealicer said:
So, I'm the lucky one here... Prices for LM dropped in the last two years massively. I can now get a Super Tool 300 EOD for about 100$ that's about half of what it did last year. Prices are still somewhat crazy, I get a Surge for less than 100$ but pay 105$ for a Wave (Although on a good day I can get a Wave for about 70$).Micra 50$
Wingman/Sidekick 70$
PS4/Rebar/Skeletool 80$
Surge/Supertool/Wave 100$
OHT/Juice???/Skeletool CX 120$
Some of these prices are quite good (especially the more expensive tools), its the cheaper tools that are way overpriced. If you are patient you can get most tools at around 100$ (Except for the MUT
).$50 for a Micra?!?! $70 for a Wingman?!?! $120 for a Juice?!?!?! At least the others are close to MSRP but holy cow!
-
@Etherealicer said:
So, I'm the lucky one here... Prices for LM dropped in the last two years massively. I can now get a Super Tool 300 EOD for about 100$ that's about half of what it did last year. Prices are still somewhat crazy, I get a Surge for less than 100$ but pay 105$ for a Wave (Although on a good day I can get a Wave for about 70$).Micra 50$
Wingman/Sidekick 70$
PS4/Rebar/Skeletool 80$
Surge/Supertool/Wave 100$
OHT/Juice???/Skeletool CX 120$
Some of these prices are quite good (especially the more expensive tools), its the cheaper tools that are way overpriced. If you are patient you can get most tools at around 100$ (Except for the MUT
).Micra for $50.

That is absurd. Just absurd.
I never buy these new, only used on eBay (or like new but opened, etc). The Leatherman MSRPs are insane.
-
@Etherealicer said:
So, I'm the lucky one here... Prices for LM dropped in the last two years massively. I can now get a Super Tool 300 EOD for about 100$ that's about half of what it did last year. Prices are still somewhat crazy, I get a Surge for less than 100$ but pay 105$ for a Wave (Although on a good day I can get a Wave for about 70$).Micra 50$
Wingman/Sidekick 70$
PS4/Rebar/Skeletool 80$
Surge/Supertool/Wave 100$
OHT/Juice???/Skeletool CX 120$
Some of these prices are quite good (especially the more expensive tools), its the cheaper tools that are way overpriced. If you are patient you can get most tools at around 100$ (Except for the MUT
).....and I thought that our MT's cost more here in Manila, Philippines

It turns out that ours is lower by just USD20.
-
I hate to say it but perhaps you get more for your money with Victorinox... ???
-
@Aloha007 said:
I agree prices have gone farther north than I feel the tool commands. I tend to not buy new but even second and third hand the tool prices have gone up.+1, the only way I can afford to collect is buying used or if it is deeply discounted. For me part of the thrill is searching and waiting for the right one at the right price to come along. Yeah, paying MRSP is absurd.
-
I agree prices have gone farther north than I feel the tool commands. I tend to not buy new but even second and third hand the tool prices have gone up.
+1, the only way I can afford to collect is buying used or if it is deeply discounted. For me part of the thrill is searching and waiting for the right one at the right price to come along. Yeah, paying MRSP is absurd.
If you are patient and attentive, good deals *do *pop up from time to time. You just need to be ready to pounce.
-
I agree prices have gone farther north than I feel the tool commands. I tend to not buy new but even second and third hand the tool prices have gone up.
+1, the only way I can afford to collect is buying used or if it is deeply discounted. For me part of the thrill is searching and waiting for the right one at the right price to come along. Yeah, paying MRSP is absurd.
If you are patient and attentive, good deals *do *pop up from time to time. You just need to be ready to pounce.
agreed!
-
The dollar has gone up, a lot, during the past few years, so all US products have increased in price, especially in the Euro zone, where the Euro has gone down a lot.
The Swiss franc has not been affected and has been strengthened, especially when the link with the Euro stopped. So, the Swiss buy more dollars/LMtool with less money. (and SAK prices have started going up too, due to that, from around June)
A few years ago (3-4), especially on eBay, there were many cheap LM multiools, but the prices have shot up, because of shipping costs, greed, and possibly less people loosing their tools to TSA.
There is am economic crisis in many countries, so people notice prices more.
Labour costs have gone up, allegedly.
Many US companies have raised their prices, as the US was coming out of a recession (remember a few years ago the Car industry etc.)
People seem to be OK paying more for LM... MTO members are a very tiny part of the LM buyers group.
Last time I checked the price for a LM Micra here, 3 or 4 years ago, it was 50 Euro.
I wonder how much it will be now, with the rise of the dollar....
-
@tosh said:
I've been wanting to pick up a few MTs. Not for use just to complete a couple of collections.
One is the BO Spirit (military version with CC head)
The other is the ST300 again BO & CC head. But.... The prices are just ridiculous here now in the UK. I'm pretty certain a few months back the ST 300 could be picked up for around. £80ish amazon are now wanting £103!! That's just crazy money. I don't even consider the ST300 to be one of leathermans "premium" lines I always assumed it nothing more than a beefed up Rebar!!Sorry LM, but I won't pay £103 for a mediocre MT. That's just daylight robbery.
Anybody else stunned by the recent price hikes?
i just looked up at amazon.co.uk: ST300 is prized around 80£ - again. So the prized has not got higher. Time for a new tool?

-
I've been wanting to pick up a few MTs. Not for use just to complete a couple of collections.
One is the BO Spirit (military version with CC head)
The other is the ST300 again BO & CC head. But.... The prices are just ridiculous here now in the UK. I'm pretty certain a few months back the ST 300 could be picked up for around. £80ish amazon are now wanting £103!! That's just crazy money. I don't even consider the ST300 to be one of leathermans "premium" lines I always assumed it nothing more than a beefed up Rebar!!Sorry LM, but I won't pay £103 for a mediocre MT. That's just daylight robbery.
Anybody else stunned by the recent price hikes?
i just looked up at amazon.co.uk: ST300 is prized around 80£ - again. So the prized has not got higher. Time for a new tool?

Tosh was looking at the BO ST300 with the cap crimper plier,not the vanilla ST300
-
Yep, prices are going up all the time. Noted that SAKs are much higher then when I first started back in 2009.
-
I've noticed the really old PSTs on evilbay are selling for a lot more than they used to even only 6 months ago.
-
@gregozedobe said:
I've noticed the really old PSTs on evilbay are selling for a lot more than they used to even only 6 months ago.There'll come a day where you can't get a PST anymore. I'm so glad I have a nice one and a few mint backups to keep me going for the forseeable future.
-
I've noticed the really old PSTs on evilbay are selling for a lot more than they used to even only 6 months ago.
There'll come a day where you can't get a PST anymore. I'm so glad I have a nice one and a few mint backups to keep me going for the forseeable future.
Good thinking that man

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login