My First Alox Mod.
-
Are you just having the electricians blade?
-
just?
i could easily do withoutany blade
:D :D :D :Dyep,im not puttin any other blade in it since i dont have spare serrated big blade >:D
or what did u have in mind?
-
I just thought you were going to put the normal plain edge in as well.
-
I hate to bring it up again (and add work) but how close is the fit between the Phillips and flat head? If its close couldn't you shave some off the flat driver and still have it be just as effective? That way you could eliminate a layer (or add a saw). With or without the saw I hope someone pays attention to your work, that pliers on a thinner SAK is near perfection....at least for me.
-
im sorry but due to my main language,i dont understand what u meant by"With or without the saw I hope someone pays attention to your work, that pliers on a thinner SAK is near perfection....at least for me.",was that good or bad feedback :D?
ive been thinkin too about shortenin the flathead cause it seems to ba possible somehow,but requires custom made spacers.
i just wanted to add pliers to alox cause im not aware on any factory made plier equipped ones,and make it to fit my taste in every aspect.and all the plier equipped sak´s seem to be so thick with all kinds of tolls that i dont use at all,like fish scale tools etc.i like to keep it simple but effective and get rid of unnecessary stuff.this willl be some sort of secondary tool to some fixed knife i use,or for a single blade folder,so i dont need plain edge to this.
and i dont deny,i wanted to do it without plain edged main blade,just to keep it bit different than others >:D.the only main blade ill put will be serrated,cause i like em.
tomorrow evenin i think ill post some progress pics more

-
Sorry for the confusion, it was definitely a compliment. The pliers seem to be on big SAKs that why I like it on a thinner one like yours.
-
ok then,got you now.
nice to see that some of u like this way i do mine

i dont understand why pliers are found only in fattie sak´s :D
-
I like the pliers on skinnier SAKs too. The mini mechanic is one of the best models out there with just a blade, combo tool and the pliers, but not alox.
I can't remember who it was now, but I made a guy 2 alox knives a while back. One was pliers only and the other was just the awl, blade and pliers. He wanted to carry the single layer alox pliers "knife" on planes.
-
well u know what i was sketchin yesterday :D
i had only few springs,two pairs of alox scales and only two implements,the saw and the pliers on my desk ;)
i think alox pliers or alox saw would be really cool,without any other tools between scales.one layer vic alox saw

-
@Tarrodemierda said:
i think alox pliers or alox saw would be really cool,without any other tools between scales.one layer vic alox saw

Holy shah! That's not a bad idea at all... You could open up a whole production line with these.

-
well i just happen to like vics saw,and it looks soo good between red alox scales

im about to post some mock up pics in an hour...
-
:ahhh
:ahhh
:ahhh
??? ??? ??? ??? ??? ??? ??? :o :o :o :o 
hows this?

-
How about making a shank for the Leatherman Bit Adapter to go opposite the Phillips. What is the size of the shaft on those?
-
well i tried already one from SOG :D
i packed the stuff away already so i cant measure it now...i wont leave it that way,that empty slot bothers me a lot.
its one inch thick now so i cant go any further....i think ill get rid of that main blade,since its so usual and id like to have serrated >:D.oh and i have one 1/4" hex shaped driver,hole-model,just like one on pocket wrench,i was thinking that...if i could make it fit on a same layer with phillips.
-
Very nice SAK Mikko :ahhh :ahhh so very nice lookin and professional :D :D :D I had only read this thread yesterday and by the time I had read it didn't have any time to type anything in ::) So I came back today and wow :o there it was all pretty and shiny there in the pic
Good job man :D -
@SporK said:
How about making a shank for the Leatherman Bit Adapter to go opposite the Phillips. What is the size of the shaft on those?oh io got it all wrong sorry man! :-\ :D
i dont know,if you meant the one that u slide over phillips found on fuse etc?
i dont have an adapter like that so i dont know any measures.
i just tried to figure out how to put maybe one from sog...the driver for 1/4" bits.
-
@Poncho65 said:
Very nice SAK Mikko :ahhh :ahhh so very nice lookin and professional :D :D :D I had only read this thread yesterday and by the time I had read it didn't have any time to type anything in ::) So I came back today and wow :o there it was all pretty and shiny there in the pic
Good job man :Dwell THANK you,its so nice and all,to see that some of u guys dig my work although its my new.but i try my best to make it so good that i could send it to our MOD gusrus to be checked out.
its not ready but not far away,i only have to make some useful,really useful implement to fill that empty place against phillips,but i think i have an idea already,just need some SS blade material,some grinding,shaping,fitting and polishing and hammerin down the rivets.
the only thing a cant pull out is how to make an Bail,that wont ruin easily the scales.hollow axle/pin would be the solution but i donno where to get one or how to make one really nicely.
-
Nice job, Mikko! Why not just put the magnifying glass in there?
-
This is what I was thinking of. It supposedly works on the Juice series Phillips which I have...the shank measures about 3/16"
-
@SporK said:
This is what I was thinking of. It supposedly works on the Juice series Phillips which I have...the shank measures about 3/16"aaaaaargh!!!!!!!!!!!!!!!!!!!!!!!! your sae/inch sizes :D :D :D :D :D :D :D :D :D :D :D :D :D
yep now i got what u mean,so u suggest that i grind and make this..shank in..well almost like the same shape thats found in surges bit holder? and so for i could slip the adapter over shank and so on.not a bad idea at all Spork,not at all

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login