The Mega84
-
@Syph007 said:
I reversed a phillips on a Ti 91mm mod and boy what a pain! I filled the hole with brass, then drilled a new hole, AND had to change the angled part of the part that mates with the back scale.Thanks Robert

Personally I considered filling the hole, but using brass could lead to galling (brass on brass) and I'd have to use a drill press with a core drill to avoid push off between the two metals and stop it favouring the brass.
I'm using a cordless drill on my kitchen table

Only other option for me would be to go and have a work with an old mate to see if he could TIG weld it up for me, then grind flush, then drill. Risks there are thermal distortion, and if the weld chills I'm back to needing a drill press
EDIT: gorgeous looking mod BTW

-
Oh for the 93mm awl, you have to relocate the pivot hole on that one as well and regrind the pivot to be the same shape as the other 84mm tools. It works as is on a 91, but not on an 84.
-
Oh, I was just going to regrind the kick so it closed further. Will that not work? I realised the arse end will be stuck up a bit, but didn't think it was a full tang rework. Was it just to get it to sit parallel, or is there something else I've missed (so I know what to watch for when I'm doing it)
-
I think tomorrow I'm going to try option 2 as described above and see how it works out. All I'm sacrificing is one can opener, and there'll be a couple of spares from the other donors if I change my mind later.... in fact I might as well build it up in tact first (option 1), and see what cans it might work on.
I know the awl will sit dangerously high at this stage, but it'll give me an overall feel of the knife and guide me as to subsequent changes.
-
@50ft-trad said:
Oh, I was just going to regrind the kick so it closed further. Will that not work? I realised the arse end will be stuck up a bit, but didn't think it was a full tang rework. Was it just to get it to sit parallel, or is there something else I've missed (so I know what to watch for when I'm doing it)Ya I did it that way to it would sit parallel. :D
84mm modding is a pain!



-
Thanks mate
That makes more sense now. I'll do the test build tomorrow and see how sensible everything looks. I'd rather not go to that extent on the tangs if I can help it, and I need to see if I can make it work (for me) a different / easier way. I don't have the time or facilities for anything too elaborate. Grinding a little off here or there is one thing, but reforming and redrilling entire tangs is not what I had in mind :D -
All knives are now apart, and the micrometer and vernier calipers have come out to play. Due to the assorted ages of the knives, the main blades vary from 2.0mm to 2.4mm. This actually does me a favour though, as the tang on the 93mm awl is thicker than a standard 84mm nail file, small blade, or combo tool.
Awl plus segmented spacer = 2.8mm, so I need the thicker spring. However, the thicker spring only measures 2.3mm. I also need to use selective assembly on the liners too. They have differing offsets where they have been stamped, giving different effective thickesses at different points, and I also need to carefully choose another layer for modification. Due to the configuration of the knife, I need three liners with the corkscrew/phillips cutout, but out of these five donors I only have two (from the Salesman and Sportsman).
Once I've matched everything up as good as possible, modified the liners and tangs as necessary, I still need to make a couple more decisions; firstly whether any additional washers are needed to get smooth function but also let the scales sit flat, and secondly whether to use any of the stock scales or something different

-
Cutting up the b/s awl to make a tapered backspring support with no vice a cordless drill and a few handtools is f-f-f-frustrating to say the least

-
YOU SMURFING AWKWARD SMURFING THING!!!!!

-
If at first you don't succeed.... swear louder
If you still don't succeed..... have a little break before trying again
If you still don't succeed..... cheat!
It's only there to tension the backspring, anneal it >:D
(if that doesn't work, the 4.1/2" angle grinder is coming out
) -
BTW, Al, are you still posting from your phone or is you camera broken.


-
Pics? Why would you want to se a grown man cry? That's just evil
:P :D
To be honest I have been posting from my phone, and just brought the camera upstairs to see if I got any decent pics

-
@50ft-trad said:
To be honest I have been posting from my phone, and just brought the camera upstairs to see if I got any decent pics
.... and no I didn't

Looks like I didn't stop for pics all that often :-[
Here's a few of the tools I've been using, and one of the donors waiting for slaughter though ...
-
Chaos .......
-
Now that's better. :D
-
At this moment in time it's still at the "dead spider" stage. Just gradually working through what works and what doesn't, before planning the refinements and moving it on a step or two
-
A very appropriate mug. ;)
-
It was a gift from a friend that I've known since we were 5. He probably knows me better than anyone :D
-
Yes, I think I'm pretty happy with that!
Still needs a little bit of tweaking and adjusting, but conceptually at least, it does seem to work. Awl sits low enough to be safe, Phillips tucks away nicely, but can still be accessed, and whilst access to the cap lifter and nail file is a little fiddly, it can be done.
I need to accept a little bit of compromise on a first ever build with bloody awkward layout I suppose :D
-
It's not got the rights segmental spacers on the awl and nail file yet, and the liners down the centre of the Phillips need opening up a little so you can access the driver easier from the end. Other than that, it seems pretty functional which is the main thing.
I think with this being my first build, and somewhat of a mismatch of parts, I might be safer peening it up with the bushes I've salvaged, popping on some nylon scales, and giving it some carry time. That way any problems have got chance to identify themselves before I start thinking about making scales for it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login