The Mega84
-
I carried it for half an hour before I realised I forgot something :ahhh :ahhh
Mini-driver for the corkscrew :D Now sorted
;)A quick count up of the features:
Full sized plain blade
Full sized serrated blade
Scissors
Wood saw
Corkscrew
Nail file
Inline awl
Phillips driver
Large flat blade driver
Small flat blade driver
Eyeglasses precision driver
Can opener.... untested
Cap lifter
Wire bender
Toothpick
Tweezers -

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
-
I so envy you folks that have the skill to mod these SAKs. As SAKs are one of my favorite things, I like them even more for the fact they can be customized with so many different parts/implements as I like to call them. I've pondered over what would make my perfect SAK and it changes almost daily. Currently, I am quite content with the Swisschamp, but would actually like to add a pruner blade and electrician blade to it, along with possibly some other implements.
I think the SAK I really want is the XLT (correct me if I'm wrong), the one the adds the pruner, elec. blade, and cyber tool. ???
Anyhow, whenever I see a mod like this it gets the gears turning in my head and if I could afford the overhead, I might even get into modding myself! ::)
-
@50ft-trad said:

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
Thank you

Coming from a professional modder, that means a lot

Its hard to think of what else you'd be able to add. Pliers would be kind of impossible to add on an 84, so the only other thing you could go for would probably be a metal file/saw. It would work on the wood saw backspring, but youd have to shorten it to fit.
I stopped working on 84s as it was much more difficult than any other size to work on. I still get alot of requests though for cadets with scissors, so someday I'll get back to working on that size.
-
@sawman said:
I so envy you folks that have the skill to mod these SAKs. As SAKs are one of my favorite things, I like them even more for the fact they can be customized with so many different parts/implements as I like to call them. I've pondered over what would make my perfect SAK and it changes almost daily. Currently, I am quite content with the Swisschamp, but would actually like to add a pruner blade and electrician blade to it, along with possibly some other implements.I think the SAK I really want is the XLT (correct me if I'm wrong), the one the adds the pruner, elec. blade, and cyber tool. ???
Anyhow, whenever I see a mod like this it gets the gears turning in my head and if I could afford the overhead, I might even get into modding myself! ::)
So far as this goes, I certainly wouldn't call myself skilled. I just winged it :D and it was all done at my kitchen table (apart from the peening - table wasn't up to it, so I used the concrete step outside the back door) without any special tooling. The right size nail could be used for a punch. A large hammer as an anvil.
As to the XLT wishes, my next Vic mod will be a Cyber-Outdoorsman. Take a CT41, ditch the pliers, and switch the large and small blades for large serrated and pruner. However, I've not completely abandoned the idea of also breaking up a Voyager Lite, including the Phillips and torch layer, switching the hooks over for the nail file on the back, and of course having the alarm clock scales.
In the meantime I have one more mod to look at. A simple (hopefully) Wenger upgrade :)
-
@50ft-trad said:

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
Thank you

Coming from a professional modder, that means a lot

Its hard to think of what else you'd be able to add. Pliers would be kind of impossible to add on an 84, so the only other thing you could go for would probably be a metal file/saw. It would work on the wood saw backspring, but youd have to shorten it to fit.
I stopped working on 84s as it was much more difficult than any other size to work on. I still get alot of requests though for cadets with scissors, so someday I'll get back to working on that size.
Yeah, I think the best thing for pliers on an 84 would be to start from scratch, and conjure up something like they have on the Rangers with the triple backspring. Not a job for at the kitchen table though :D It would have been nice to have the metal saw in there too, but that might have been one tool too many. At the minute it's a very good size and weight, and isn't too unwieldy or obtrusive.
I was actually walking around earlier and thought to myself you can't actually tell it's in the pocket.... then I realised it wasn't even in my pocket

-
@50ft-trad said:
@50ft-trad said:

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
Thank you

Coming from a professional modder, that means a lot

Its hard to think of what else you'd be able to add. Pliers would be kind of impossible to add on an 84, so the only other thing you could go for would probably be a metal file/saw. It would work on the wood saw backspring, but youd have to shorten it to fit.
I stopped working on 84s as it was much more difficult than any other size to work on. I still get alot of requests though for cadets with scissors, so someday I'll get back to working on that size.
Yeah, I think the best thing for pliers on an 84 would be to start from scratch, and conjure up something like they have on the Rangers with the triple backspring. Not a job for at the kitchen table though :D It would have been nice to have the metal saw in there too, but that might have been one tool too many. At the minute it's a very good size and weight, and isn't too unwieldy or obtrusive.
I was actually walking around earlier and thought to myself you can't actually tell it's in the pocket.... then I realised it wasn't even in my pocket



-
@50ft-trad said:
I carried it for half an hour before I realised I forgot something :ahhh :ahhhMini-driver for the corkscrew :D Now sorted
;)A quick count up of the features:
Full sized plain blade
Full sized serrated blade
Scissors
Wood saw
Corkscrew
Nail file
Inline awl
Phillips driver
Large flat blade driver
Small flat blade driver
Eyeglasses precision driver
Can opener.... untested
Cap lifter
Wire bender
Toothpick
TweezersI forgot can key :ahhh
-
Well, I'm very pleasantly surprised!
Despite the can opener's compromised positioning, upon offering the tool up to a range of different sized cans, it seems the can opener should work fine on cans of up to 85mm diameter (standard cans being around 75mm diameter). So standard cans will be fine, but larger cans may be a problem. I can live with that.
-
I can picture you at your kitchen table, stuffed to the gills, unhappily eating tuna fish, beans, peaches and spaghetti-Os so as not to let them go to waste
:D
-
@tommywp said:
I can picture you at your kitchen table, stuffed to the gills, unhappily eating tuna fish, beans, peaches and spaghetti-Os so as not to let them go to waste:D

I only offered it up, I didn't actually start opening them, but yeah a chucklesome image :D
The can I found where it might start to struggle was a can of new potatoes. I'll have a go at that one tomorrow. If I can get that open, I know I'm good to go with anything smaller ;)
-
@50ft-trad said:
Mega84 v1 is complete and operational

Now, that's quite an unusual SAK toolset, especially clad in nylon scales! No key ring tho'

If I feel ambitious later (a lot later :P) I might have a go at making my own scales, and seeing if I can get a pin and pen in there too :D you're right though, no keyring. There was one, but I ground it away...... weight reduction

-
Oh, and I've discovered that if you use the scissors on your nails and cut them too short so you can't open the bottle opener
the inbuilt nail nick access tool works very well..... tweezers :D -
See, I said it'd be good.
I pictured Al, with a beer in one hand, fag in the other with a maniacal grin, frantically bashing away at some SAK parts on his doorstep in the middle of the night, lit only by a headtorch, surrounded by dismembered SAKs. :D -
@hiraethus said:
See, I said it'd be good.
I pictured Al, with a beer in one hand, fag in the other with a maniacal grin, frantically bashing away at some SAK parts on his doorstep in the middle of the night, lit only by a headtorch, surrounded by dismembered SAKs. :DCup of tea and a roll up, but otherwise quite close :D
-
@50ft-trad said:
@50ft-trad said:
Very clever with the Phillips

Thanks Tommy
It took a while to figure out how to make it work, but it took a lot longer to get the right donors together :DYa very nice!
Its funny I am tackling the same issue right now on a 91mm job that needs both backside phillips and corkscrew. The problem is I have less space to fit the phillips, so I milled it flat on each side, (kind of looks like a flat leatherman phillips now) but it should fit in space I have for it now. Im using 2x saw backsprings with backtool cutouts to house the phillips. It should work but it hasnt gone together yet.
Cheers Bob
I was originally hoping to get away with not having to add that second liner, but as it happens they were needed anyway for access to the nail nicks on the cap lifter and nail file. They're still tight, but doable with my nails, and would have been impossible with one liner. The awl worked out well too with just a sliver ground off the kick 
Are you using an inline Phillips for that mod, or have you milled it offset? I wouldn't imagine you could afford to lose much off the tang side of a backspring Phillips

I got my version done, here's what it ended up looking like.

I only shaved off 0.020" from the pivot side, and more from the other side. It technically less strong than before, but a compromise to fit it in the space I had. :D
-

I figured you'd have to offset machine it ;) It's ended up a little like the Phillips on the Bucktool :D It won't cause your customer any issues though, even the reduced thickness tang should still take more torque than a normal peened assembly would allow anyway

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login