Gerber Dime backspring question
-
I apologize for the bad camera. It is hard to see, but the backspring under the package opener appears "bent". (For example, in the second picture the spring on the left lines up exactly with the scale, the spring on the right is curved and there is a gap between it and the scale.) There is a significant gap between the backspring and the scale. It doesn't really affect tool use, but aesthetically it just drives me nuts.
The scales seem flush, so I was wondering if maybe it was constructed this way on purpose (since the scissors on the opposite side are thicker than the box cutter)? Do you guys think it would be feasible to take this apart and bend the spring so that it lies flush, or should I just make peace with it? What do yours look like?
I have such mixed feelings about this thing.
Thanks folks.



-
Mine's not like that. If it doesn't affect function, I'd (try to) ignore it. If you start taking it apart and trying to deform springs, you might weaken them/induce cracking, and have worse problems down the line
-
Thanks for looking.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login