What did you just get?
-
There's a drawing on Leatherman's leaflet indicating I should put a finger between the handles, as you say. There's no way I can do that, tho'! My finger should be the size of a pencil to do that.
I've managed to flick it open a few times. It took a somewhat loose grip and a determined, dry flick of the wrist downwards. I'm not sure if I should be pushing the handles downwards or rather lifting the pliers head upwards. This loose grip is essential but makes me afraid I'll drop the thing. Oh, well, I guess it'll become easier with practice and as the tool gets broken in.
The things I do to get material for a good review :D

Hold it by the sides of the handles, not the edges. If you hold the sides near the bottom, and make sure the handles are parallel, it should work great. If you hold the edges, you're pinching the "track" the pliers ride in and wedging it shut. Hold the handles parallel by the sides, however, and the track remains free.
Also,
BK4 :D
Full tang LMF II (attached glassbreaker)
Sog Fielder XL
Not pictured- powerduo, octane, a couple Lansky diafolds, and a flag :)
Thanks. You're right; holding the tool diagonally, fingertips touching handles corners, does add friction that impedes quick and enjoyable pliers deployment and also makes the necessary somewhat loose grip even harder to achieve correctly -'tool might go flying around. In other words, I think I can say I've made some progress :DThat kinda scary~~ parang~~ kukri-style BK4 looks like it means business!
-
There's a drawing on Leatherman's leaflet indicating I should put a finger between the handles, as you say. There's no way I can do that, tho'! My finger should be the size of a pencil to do that.
I've managed to flick it open a few times. It took a somewhat loose grip and a determined, dry flick of the wrist downwards. I'm not sure if I should be pushing the handles downwards or rather lifting the pliers head upwards. This loose grip is essential but makes me afraid I'll drop the thing. Oh, well, I guess it'll become easier with practice and as the tool gets broken in.
The things I do to get material for a good review :D

Hold it by the sides of the handles, not the edges. If you hold the sides near the bottom, and make sure the handles are parallel, it should work great. If you hold the edges, you're pinching the "track" the pliers ride in and wedging it shut. Hold the handles parallel by the sides, however, and the track remains free.
Also,
BK4 :D
Full tang LMF II (attached glassbreaker)
Sog Fielder XL
Not pictured- powerduo, octane, a couple Lansky diafolds, and a flag :)
Thanks. You're right; holding the tool diagonally, fingertips touching handles corners, does add friction that impedes quick and enjoyable pliers deployment and also makes the necessary somewhat loose grip even harder to achieve correctly -'tool might go flying around. In other words, I think I can say I've made some progress :DThat kinda scary~~ parang~~ kukri-style BK4 looks like it means business!
It helps having a really loose old Mr. Pinchy to practice with :D
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods! -
New toy:
Vic Sentinel OHO Serrated w/pocket clip (not my favourite blade type but Vic's serrations are not very agressive).



-
No, I had one but they are harder to find in longer lengths for a bait casting setup.
It's actually a Falcon Inshore, I bought the spinning model as a replacement for a St. Croix, and I love it so much I ordered the same thing again for my inshore baitcaster (Shimano Curado)
-
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!




-
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!
Good to hear that. I hate dents on knife edges. Now, maybe give it a bit of (sand-paper) stropping ? >:DThat lil' prybar is very intriguing, I've considered getting one many times. Simple design, I like that.
-
@pfrsantos said:
New toy:Vic Sentinel OHO Serrated w/pocket clip (not my favourite blade type but Vic's serrations are not very agressive).

By not very aggressive you mean not very pointy, I take it? Pray you don't cut yourself with that thing!
(Not a blade for N_N_R, that one ::) )
-
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!
Where did you buy that prybar? Just like others, I've thought about getting one several times, but the only ones I've been able to find, are from Countycomm, and they tend to have rather high shipping rates.
-
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!
Good to hear that. I hate dents on knife edges. Now, maybe give it a bit of (sand-paper) stropping ? >:DThat lil' prybar is very intriguing, I've considered getting one many times. Simple design, I like that.
It's about to meet a bath of paint stripper, then hopefully a date with a bit of sandpaper :D
The prybar was one from grants $2 list, when I found it it was $2.something shipped, couldn't pass it up! Great finish, seems stout too!
-
[quote author=SAKnight link=topic=50835.msg1144782#msg1144782 date=1441083448]
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!
Good to hear that. I hate dents on knife edges. Now, maybe give it a bit of (sand-paper) stropping ? >:DThat lil' prybar is very intriguing, I've considered getting one many times. Simple design, I like that.
It's about to meet a bath of paint stripper, then hopefully a date with a bit of sandpaper :D
The prybar was one from grants $2 list, when I found it it was $2.something shipped, couldn't pass it up! Great finish, seems stout too!
[/quote]Why remove the coating? I'm not a fan of blacked-out gear but I'd leave it there just to see how durable it is, if nothing else.
Tempted for a mini prybar, though I'll probably never use it... :ahhh
-
[quote author=firiki link=topic=50835.msg1144912#msg1144912 date=1441108473]
[quote author=SAKnight link=topic=50835.msg1144782#msg1144782 date=1441083448]
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!
Good to hear that. I hate dents on knife edges. Now, maybe give it a bit of (sand-paper) stropping ? >:DThat lil' prybar is very intriguing, I've considered getting one many times. Simple design, I like that.
It's about to meet a bath of paint stripper, then hopefully a date with a bit of sandpaper :D
The prybar was one from grants $2 list, when I found it it was $2.something shipped, couldn't pass it up! Great finish, seems stout too!
[/quote]Why remove the coating? I'm not a fan of blacked-out gear but I'd leave it there just to see how durable it is, if nothing else.
Tempted for a mini prybar, though I'll probably never use it... :ahhh
[/quote]I kept telling myself I would. But the call of bare steel is one that must be answered. And uncoated carbon steel? Well, that is the stuff dreams are made of

Mostly I just like that it's a little more 'mine', and will show use now. Plus I love the look.Anyone know why it's blue halfway up

-
@SAKnight said:
I kept telling myself I would. But the call of bare steel is one that must be answered. And uncoated carbon steel? Well, that is the stuff dreams are made of
Mostly I just like that it's a little more 'mine', and will show use now. Plus I love the look.Anyone know why it's blue halfway up

Differential heat treatment

-
I kept telling myself I would. But the call of bare steel is one that must be answered. And uncoated carbon steel? Well, that is the stuff dreams are made of

Mostly I just like that it's a little more 'mine', and will show use now. Plus I love the look.Anyone know why it's blue halfway up

Differential heat treatment

I was wondering that, but strange placement, no? I mean, more flex in the thinner bit, but the edge must be hardened?
-
I kept telling myself I would. But the call of bare steel is one that must be answered. And uncoated carbon steel? Well, that is the stuff dreams are made of

Mostly I just like that it's a little more 'mine', and will show use now. Plus I love the look.Anyone know why it's blue halfway up

Differential heat treatment

I was wondering that, but strange placement, no? I mean, more flex in the thinner bit, but the edge must be hardened?
Let's see a pic
-
I kept telling myself I would. But the call of bare steel is one that must be answered. And uncoated carbon steel? Well, that is the stuff dreams are made of

Mostly I just like that it's a little more 'mine', and will show use now. Plus I love the look.Anyone know why it's blue halfway up

Differential heat treatment

I was wondering that, but strange placement, no? I mean, more flex in the thinner bit, but the edge must be hardened?
Let's see a pic
Whoops, first post there should've had them...




-
Interesting, maybe you should start a thread in the Edged tool forum so the experts can chime in.
-
New toy:
Vic Sentinel OHO Serrated w/pocket clip (not my favourite blade type but Vic's serrations are not very agressive).

By not very aggressive you mean not very pointy, I take it? Pray you don't cut yourself with that thing!
(Not a blade for N_N_R, that one ::) )
Yeah, the Vic serrations are wavy and subtle. Spyderco, for instance, got some very pointy and marked serrations. Don't let it fool you, though. This mother smurfer cuts like a mother smurfer! Should be called Vic's light saber!
:ahhh :ahhh :ahhh :ahhh
-
The belt I ordered came in today! :D I must say this bad boy is heavy! I took a few pics and put them into a collage cause it's just easier, but if you see one pic or are interested in one just let me know and I'll just post that pic.. So a few things about this belt, it's heavy, it's stiff, it's stitched everywhere, and that pocket is sewn in, but not completely, the top and bottom are lose, the sides are what are stitched. It definetly needs to be broken in! I took a few other pics along with my other belts to give an idea on size wise, three are the same size at 1-1/8", the next two are 1-1/2", and lastly that new one is 1-3/4"! All five of the others are by Bison, and that new one is by S.O.Tech, all six to be American made! One thing I did notice is on the bottom between the buckle and the loop, there is a red stitch, kinda as if the stitching was to give way it's a warning to say, don't even think of using it! Other then that I think I did good?
JR

-
SOG Solute Mini. Wanted another knife for work and thought to give SOG another try. This one is way better than the Slim Jim I had previously.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login