Official MT.O 30-Days Leatherman SQUIRT® Challenge!
-
@Kampfer said:
I forgot to post the official list of Challengers.Rearranged in order of entry pic post.
00 - Kampfer - PSA4
01 - tpolley - PS4 - needs to up post count
02 - Obi1shinobee - PS4
03 - eddie1115 - PS4
04 - rishardh - PS4
05 - N_N_R - PS4
06 - JP - SQUIRT P4
07 - Smaug - ES4
08 - Gareth - PS4
09 - danilo - PS4
10 - Kevin Davey - PS4 - needs to up post count
11 - Its Hard To Know - PS4/ES4/E4
12 - TazzieRob - PS4/ES4
13 - hellsing - PS4
14 - powernoodle - PS4
15 - bounding star - S4
16 - Huntsman - PS4
17 - Freaver - P4
18 - AdmSlc - PS4
19 - vartz04 - PS4 - needs to post a picI've updated the OP with a link to the start of the challenge and have upgraded the thread to sticky status.
They are late I know, sorry about that, but the badges will be released soon.
-
-
I'm kinda surprised, that only 19 MT.O'ers dared to take this challenge. I seem to remember alot more people in some of the SAK-challenges.

Might also be a question of who has the tool in question. Alox challenge was quite open since we could switch between different models
-
-
Just a bit of fingernail trimming and cleaning. Plus used the knife to open a blister pack for a rasp so I could fit a new handle to an old axe
-
Well, I kinda blew it already, as I spaced out and carried the Victorinox Manager yesterday.
Starting today with the ES4. Will continue into October 1st as penance. :)
Brought a box of toothpicks to work so I have a fighting chance. No toothpicks at home now; maybe this will encourage better flossing habits. :D
-
@Gareth said:
So far so dull. Scissors and file have taken care of my fingernails and that's about it. :-\ I did need some hex keys yesterday and obviously the Squirt couldn't provide them, but then nor could any of my other multitools so I don't feel at all bad about having to get the right tools for the job.You don't have the accessory bit kit for Leatherman Wave/Charge/Surge?
Vic has hex bits for the Cybertools, but you have to special order them. Might've been too big though; I think the Vic ones stop at 4mm. Leatherman stop at 6mm.
-
Some great posts so far.
Had to do a 24 hour drive just hours before the challenge started due to a family emergency. Daringly I grabbed only my squirt. Then had second thoughts and also took my Wave with the bit kit as a backup.
Used the squirt on the road for...
Used the knife to open a DVD package for my kid.
Open a 64oz Rock Star, the built in can opener was missing and this was the only one they had in this size. -
@N_N_R said:
Okay, Day 2 - checking what type of batteries the light I got yesterday uses:What kind of a manufacturer makes you need a philips head driver to change the batteries of a light

These lights are actually becoming more and more popular around here. Think it's because of the hook and magnet. But they really are a pain in the butt, when you gotta change the batteries.
-
@N_N_R said:
What kind of a manufacturer makes you need a philips head driver to change the batteries of a light
It seems that the whole world is held together with mini phillips screws. The mini phillips driver on a 58mm Manager is (along with its awesome scissors) is the primary reason I usually carry one.
The PS4's phillips driver is quite usable for larger phillips screws, but won't reach the tiny, recessed phillips that you often see on small electronics. I recently bought a dash camera for my vehicle, and it too is assembled with recessed mini phillips. Both the 58mm SAK and Vic PS4 drivers are too wide to reach its tiny phillips screws.
-
Day two here.. Feeling inadequate with only the squirt. On the plus side, I have a lot of extra pocket space since I don't have a full size MT on me and also a separate edc knife which I usually carry.
-
Good morning challengers,
Needed to open a can last night, since Squirt doesn't have a can opener, I used the kitchen opener.
(I am sure Squirt blade can open it, but it would a a PITA and might suffer some damage).Also did some food prep this morning, the blade was just too short for my liking, so used dedicated kitchen knife instead.
-
That's interesting to hear. I didn't think such kind of a light would be popular, it looks rather cheap (maybe that's why it's popular?) and replaceable. And expensive to maintain - it's got 3 AAA and doesn't look extremely bright. Or maybe it was just used before I got it (my sister gave it to me, knowing i love lights).
As for the philips screws, I don't normally need/use screwdrivers, this was one of the very rare uses I have for a screwdriver. But, hey, you'd better have a tool for when you unexpectedly need it.
-
@Kampfer said:
Good morning challengers,
Needed to open a can last night, since Squirt doesn't have a can opener, I used the kitchen opener.
(I am sure Squirt blade can open it, but it would a a PITA and might suffer some damage).Also did some food prep this morning, the blade was just too short for my liking, so used dedicated kitchen knife instead.
GOT CAN OPENER ??


-
I knew it can be done, just didn't want to go through that trouble.

-
I have at least 3 of those lights. (all gifts)
Not the best design. For example, the swivel hook on the bottom has no friction, so you can hang it from something, but can't control the position of it very well.
They do work OK though. I think they use 3AAAs right?
-
Yes, the lights use 3 AAA batteries. They don't seem too bright with fresh batteries, but maybe the manufacturer opted for less light, but longer runtime? Never heard anything about that with these lights.
Just to remain on topic, tomorrow I gotta check if I can use my P4 on the lights we sell. I seem to remember that it won't fit in the hole. Or maybe that was my Explorer...To really stay on topic, I've missed having either a larger blade or an OHO blade on me today. I've reached to my belt several times today, to find... Nothing. But I've managed to make it through the day with just the P4.
Might have to carry a utility knife tomorrow, just for opening boxes. Just the regular snap-off kind. I suppose that's within the rules, since it's not a folding knife? -
Cutting Crispy Roast Pig for dinner


-
@Obi1shinobee said:
Cutting Crispy Roast Pig for dinner


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

