Craving some Juice.
-
Greetings! I hail from the land of Swiss army knives and cheapo tools. I have some questions if you guys don't mind taking the time?
I'll start with the non Juice related question. I want to replace my Wingman with something lighter. Would the Skeletool be a good choice? Is there a better option?

I've been craving some OJ recently! Not Orenthal James not that citrusy sweet sweet drink, but the Leatherman Juice in I believe it's Flame Orange. Which ever orange is kind of a goldish hue. I've seen at least two shades of Orange. If anyone can go deeper into the colors/shades that would be nice. Some tool porn wouldn't hurt...
Anyway, I'm interested in buying a Juice but am unsure it's worth it's price. I've bought one Leatherman in the past (the Wingman) and in all honesty just wasn't impressed. It's not bad but I felt it wasn't worth the $22 dollars I spent on it. TBH I'm not really a folding pliers type of guy. A SAK has served me well but I have been thinking about something more pliers orientated recently. Don't care for my Wingman and a Wave or Vic Spirit are a bit larger and heavier than I'd care for.
Seeing as how a used Juice cost more than a Wingman I was wondering if the Juice was worth it's higher price and any pros and cons? Such as the Wingman has a pocket clip but the Juice weighs less and has better scissors.
Hate the Wingman's scissors! One of the main reasons I didn't like the tool. Should have bought the Sidekick. The scissors on my keychain SAK outperform the Wingman's. Vic scissors are hard to beat in my opinion.
Thanks for any advice in advance.

-
PLEASE save your money. If you don't like the Wingman scissors you will HATE the Juices. The Juice is not a good tool IMO and not nearly worth its cost!
There are other options but believe me the Juice is junk and will tear your knuckles up opening the drivers.
If you'd like to stick with Leatherman, I can recommend a PST or Rebar.
Gerber? Try the MP400/450.
I hope I got to ya in time

-
Not a fan of Juice.
-
Get yourself a PST II
You can thank me later :D
-
TRY THIS IS BETTER FOR YOU


-
@Obi1shinobee said:
TRY THIS IS BETTER FOR YOU


-
The concept of the Juice is fantastic. The execution of certain tools lets it down.
However, some folks love 'em, and some folks hate 'em. I had a CS4 and was very disappointed in it. I gifted it to my brother so that he had a UK legal multitool, and he absolutely loves it! You'll only know if it's a tool for you when you get it in your mitts and take it for a test drive :)
-
Get yourself a PST II
You can thank me later :D
Careful there. I bought a PST II and the scissors stopped working. Go with the regular PST and get an awl

The early PST II scissors had a design problem but they corrected on later models. I duplicated their fix on the early model I have.
-
I'm a fan of both PST and PST II, compact and lightweight, good fit and finish compared to some newer models (e.g. Wingman/Sidekick). I actually really like the Skeletool as a companion to a SAK, provided the SAK has scissors (and saw or file if needed). Locking blade, light/medium duty pliers, and bit driver without too much size/weight.
I'd recommend starting with a PST or PST II, as they're cheaper to start with. But the Skeletool is a good one to keep in mind if you plan on carrying a SAK together with it.
-
Yeah, pliers with wire cutters is a very useful tool.
If you want to go smaller than the wingman then the Skeletool and PST is out.
If you want an outside opening blade then the PST is out.
If you want scissors the Skeletool and PST is out.
If you want a side clilp then the PST and Juice is out.
If you want a big blade then the Juice is out.
If you want a legendary classic tool then the Skeletool and Juice is out.If you decide on a Juice, FYI the older model has a slightly longer blade. They look nicer too.
-
I have the juice XE6 and I'm not happy with it yet. I carry it all the time outside of work or home ( or did till I started on the squirt month challenge). So far all 3 flat heads have given me cuts just under my thumbnail near the knuckle while opening them. The largest flat head has folded while using it meaning I hurt my hand. The Philips is good, but to short so the pocket clip on the lanyard ring gets in the way when using it.
I use a surge at work, and also at home, so think I'm expecting to much of it to be honest. I'll persevere with it, and see how I get on with it, but at the mo I wouldn't recommend one.Sent from my SM-N910F using Tapatalk
-
So far not to thrilled with what I'm hearing, but the truth can be a hard pill to swallow.
As far as the Rebar and PST options, nah. Don't like their old school designs. Like the option of exterior deploying blades and like older leatherman the grips may create hot spots when really bearing down on the handles. May not, but they look like they may.
-
How about the Squirt? I haven't really tried either Juice or Squirt but they both conjure the image of "small pliers" in mind. I'm surprised by the feedback the juice got above.
-
I think you should reconcider Spirit. It is not that much heavier or bigger than certain Juice models. Plus all tools are outside opening, and locking. And Spirit will not rust.
-
I think if you know the Juice's shortcomings beforehand, you can set the expectations better. You can expect stubby drivers (that bite...), plier handles that are a bit too short for the decent sized head, and underwhelming scissors. Moving past that, you do get a lot of tools in a small package, diamond file and saw are nice (if equipped), the above mentioned plier size, and the happy colors :)
I've found that the Juice fills a gap I didn't need filled. Too big when I need a small tool, too small when I need a big one. But that is based on my needs, and if you want to try one, you should definitely try one. You could buy a used old model, and sell it again if it doesn't work out.
-
Juices are pretty.... I had two... and hurried to get rid of them later. Their prettiness isn't worth it. The back spring of my S2 broke after about/less then a week of almost no use and the biggest flat screwdriver became useless.
The Xe6 was rather loose and gave the impression of a cheapo, not snapping back when you close it like the rest of the LM tools. Let alone the numerous times when the Juices' screwdrivers cut people

When you buy a Juice, it either has to be a love at first sight or

-
@50ft-trad said:
The concept of the Juice is fantastic. The execution of certain tools lets it down.However, some folks love 'em, and some folks hate 'em. I had a CS4 and was very disappointed in it. I gifted it to my brother so that he had a UK legal multitool, and he absolutely loves it! You'll only know if it's a tool for you when you get it in your mitts and take it for a test drive :)
I agree, I bought my wife the xe6. Got a great deal so I picked one up too. At first I thought it was too small, but for its size it packs a punch. It really comes down to what and how much you plan to use it. One mans gold is another man's salt.
-
I think the Juice is pretty OK. For me it's the best fully UK-legal pliers-based multitool available. There's not much competition in this category but I don't know of anything better. However it is way over-priced here.
The bit-driver accessory is a good addition, for greater verstility and more reach. -
I like my Juices, but they are kind of expensive.
I'm also a SAK guy, so if you want to venture into pliers, how about a Mechanic or Deluxe Tinker?
Smaller, lighter and less expensive than a LM Juice too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

