SAK Apprentice, Rare?
-
-
The 84mm Apprentice is an interesting knife. As best as I can tell, there was one large run of them made in the early/mid 1990s, and another smaller run later in the mid/late 1990s. The majority of the ones you see have full tang 2.4mm blades from the early run, but a smaller subset have the thinner 2.0mm blades from later run.
Statistically they show up on eBay average one every two months of so. Which is often enough that at first I wouldn't call it rare exactly. However, this statistic is a bit misleading. 80% of the Apprentices sold in the last 6 years are clustered together as certain sellers (al-mar being one) pick up lots of NOS items and sell them off. Outside of the NOS lots, the Apprentice only pops up once or twice a year. So yeah, IMO it's a pretty rare knife.
-
@jazzbass said:
The 84mm Apprentice is an interesting knife. As best as I can tell, there was one large run of them made in the early/mid 1990s, and another smaller run later in the mid/late 1990s. The majority of the ones you see have full tang 2.4mm blades from the early run, but a smaller subset have the thinner 2.0mm blades from later run.Statistically they show up on eBay average one every two months of so. Which is often enough that at first I wouldn't call it rare exactly. However, this statistic is a bit misleading. 80% of the Apprentices sold in the last 6 years are clustered together as certain sellers (al-mar being one) pick up lots of NOS items and sell them off. Outside of the NOS lots, the Apprentice only pops up once or twice a year. So yeah, IMO it's a pretty rare knife.

-
The 84mm Apprentice is an interesting knife. As best as I can tell, there was one large run of them made in the early/mid 1990s, and another smaller run later in the mid/late 1990s. The majority of the ones you see have full tang 2.4mm blades from the early run, but a smaller subset have the thinner 2.0mm blades from later run.
Statistically they show up on eBay average one every two months of so. Which is often enough that at first I wouldn't call it rare exactly. However, this statistic is a bit misleading. 80% of the Apprentices sold in the last 6 years are clustered together as certain sellers (al-mar being one) pick up lots of NOS items and sell them off. Outside of the NOS lots, the Apprentice only pops up once or twice a year. So yeah, IMO it's a pretty rare knife.

+1!
-
If you get tired of looking, they are super easy to mod from a waiter, only one pin needs to be removed.
/post/724973
Thanks for the link. I have thought of trying my hand at it. The waiter would be easy to get, do you have to use a Phillips from a 84mm SAK?
Nope the phillips from the 91 and 84 are identical.
-
Thank you Sir!
-
Until the time I can find or make a SAK Apprentice I have been using this....

ISC EndeavorThe reason I'm mentioning this is because jazzbass talked about a 2.4mm and a 2.0mm main blade, this knife has a main blade that seems thin. What about the Waiter, would it have a 2.4mm blade??
-
@parman53 said:
The reason I'm mentioning this is because jazzbass talked about a 2.4mm and a 2.0mm main blade, this knife has a main blade that seems thin. What about the Waiter, would it have a 2.4mm blade??All 84mm knives switched from 2.4mm to 2.0mm blades in the mid 90s sometime (I'll be damned if I can get a straight answer on exactly when). Understand, though, that this refers only to the tang of the blade, not the whole blade itself. The rest of the blade is the same size. IOW, older blades have a 2.4mm tang, then a 0.4mm step down to the spine of the blade which starts at 2.0mm and narrows to a point at the end of the blade. Newer blades have a 2.0mm tang which just blends directly into the spine of the blade. The backspring on these two blades are still the same thickness - 2.4mm - so the knives with the newer blades use an outer liner that has a 0.4mm divot in it to made the blade sit correctly above the wider backspring.
So, a pre-1990s Waiter would have a 2.4mm blade, a post 1990s Waiter would have a 2.0mm blade. FWIW, 91mm knives made this change, too, in 2006.
-
Excellent!!! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
