What did you just get?
-
That's great leathermon!
This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine. -
That's great leathermon!
This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine.Can't knock a $9 knife with a blade that long that the steel is good for the price

-
That's great leathermon!
This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine.Can't knock a $9 knife with a blade that long that the steel is good for the price

I've been calling it my Chinese Mora :D
-
[quote author=SAKnight link=topic=50835.msg1149642#msg1149642 date=1441993380]
That's great leathermon!This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine.Can't knock a $9 knife with a blade that long that the steel is good for the price

I've been calling it my Chinese Mora :D
[/quote]Mora is my tool bag/box knife. Most of the tool bags and boxes I own have a Mora in them for just in case I need a good knife that I don't mind beating on. That seems like an even cheaper alternative if I didn't have plenty of Moras already

-
[quote author=leathermon link=topic=50835.msg1149663#msg1149663 date=1441995461]
[quote author=SAKnight link=topic=50835.msg1149642#msg1149642 date=1441993380]
That's great leathermon!This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine.Can't knock a $9 knife with a blade that long that the steel is good for the price

I've been calling it my Chinese Mora :D
[/quote]Mora is my tool bag/box knife. Most of the tool bags and boxes I own have a Mora in them for just in case I need a good knife that I don't mind beating on. That seems like an even cheaper alternative if I didn't have plenty of Moras already

[/quote]I always want to stash knives/tools around, but find myself wanting to fondle all the ones that are stashed, so I take them back out. I think I need multiples to pull it off ha. But yeah, I could certainly see this being a very decent knife to buy a couple of, just to have around!
-
[quote author=SAKnight link=topic=50835.msg1149673#msg1149673 date=1441996613]
[quote author=leathermon link=topic=50835.msg1149663#msg1149663 date=1441995461]
[quote author=SAKnight link=topic=50835.msg1149642#msg1149642 date=1441993380]
That's great leathermon!This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine.Can't knock a $9 knife with a blade that long that the steel is good for the price

I've been calling it my Chinese Mora :D
[/quote]Mora is my tool bag/box knife. Most of the tool bags and boxes I own have a Mora in them for just in case I need a good knife that I don't mind beating on. That seems like an even cheaper alternative if I didn't have plenty of Moras already

[/quote]I always want to stash knives/tools around, but find myself wanting to fondle all the ones that are stashed, so I take them back out. I think I need multiples to pull it off ha. But yeah, I could certainly see this being a very decent knife to buy a couple of, just to have around!
[/quote]Only in an edged tool community would "fondling" a knife not sound very wrong. LOL
-
[quote author=raistlin65 link=topic=50835.msg1149683#msg1149683 date=1441997089]
[quote author=SAKnight link=topic=50835.msg1149673#msg1149673 date=1441996613]
[quote author=leathermon link=topic=50835.msg1149663#msg1149663 date=1441995461]
[quote author=SAKnight link=topic=50835.msg1149642#msg1149642 date=1441993380]
That's great leathermon!This came today, curious how it'll hold up. Came very sharp, which I didn't expect. Pleasant surprise :)
I have seen those, almost pulled the trigger. I'm very anxious to hear your thoughts.
I assume you're aware it's a fake? Well the only thing I could find online is someone claiming it has no tang, but I imagine it's a stick. The pommel is threaded into a bolt, which must be the bottom of the tang? It came shaving sharp from china, 3 days before the earliest estimated date (Sept. 14-28!).
Sheath is cheap, but has a hard plastic insert with good retention. Rubber handle smells horrid, but is getting better.
I just cut 100" of cardboard with the same spot on the blade with no dulling, so what I assume to be 5cr seems to be acceptably heat treated.
For less than $9, I'd do it again. Keep in mind, handle has slight play, and the cap unscrews easily, but it feels great in hand and it's not like it rattles, just you can slide it vertically (like, from edge to spine) a mm or two. You won't notice it in use, I'd imagine.Can't knock a $9 knife with a blade that long that the steel is good for the price

I've been calling it my Chinese Mora :D
[/quote]Mora is my tool bag/box knife. Most of the tool bags and boxes I own have a Mora in them for just in case I need a good knife that I don't mind beating on. That seems like an even cheaper alternative if I didn't have plenty of Moras already

[/quote]I always want to stash knives/tools around, but find myself wanting to fondle all the ones that are stashed, so I take them back out. I think I need multiples to pull it off ha. But yeah, I could certainly see this being a very decent knife to buy a couple of, just to have around!
[/quote]Only in an edged tool community would "fondling" a knife not sound very wrong. LOL
[/quote]And y'know, i almost used a different word... But none were more accurate

-
GEC 23


-
Shes a beauty!
-
@captain spaulding said:
Shes a beauty!+1

-
Someday I'll find a gec. That's a dreamy knife!
-
Thanks fellas!!!!

-
-
Glad you got the one you wanted at a deal!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




