Fenix E21 problems.
-
My Fenix E21 bit the dust....... well kind of. Its acting weird and I am hoping someone might be able to help me fix it if at all possible. I will try to explain what it is doing. When I start to depress the tail switch the light will come on in momentary, but once the switch "clicks" the light is not producing any light. When I depress the switch again (which would be to turn it off) it comes on momentarily and when it "clicks" the light is off again. Any ideas?
-

MODs please delete the other threads accidentally posted. Something is up with MTO. I screen capped the error.
-
@captain spaulding said:
My Fenix E21 bit the dust....... well kind of. Its acting weird and I am hoping someone might be able to help me fix it if at all possible. I will try to explain what it is doing. When I start to depress the tail switch the light will come on in momentary, but once the switch "clicks" the light is not producing any light. When I depress the switch again (which would be to turn it off) it comes on momentarily and when it "clicks" the light is off again. Any ideas?Sounds like something wrong inside the switch itself. Can you get it out and pull it apart to see if it is fixable ?
-
It seems like the inside of the switch is dirty (or broken..).
when you press it there is enough force/pressure to make contact (cut through the dirt).
when you let it go the force applied by the internal spring only is not enough to maintain contact.you should be able to remove the switch and its cover and clean and lubricate it (with contact spray e.g. Kontakt 61)
-
I had similar problems with my LD20 - turns out the LED/circuit board holder had come slightly loose inside the head. Maybe the same construction on the E21? Unscrew the head from the body and inside there's a ring with two holes - I managed to wedge the tips of a pair of needle nose pliers in there and tighten the while thing back down, worked fine after that.
-
Thanks for the tips guys. I will see what I can do tomorrow.
-
@hiraethus said:
I had similar problems with my LD20 - turns out the LED/circuit board holder had come slightly loose inside the head. Maybe the same construction on the E21? Unscrew the head from the body and inside there's a ring with two holes - I managed to wedge the tips of a pair of needle nose pliers in there and tighten the while thing back down, worked fine after that.I fixed it and you where exactly correct as this is what was wrong. I pulled the back end of the light off and noticed the metal ring with the two holes. I found SAK pliers worked the best and screwed it tight... or so I thought. I guess it is reverse threaded as I loosened it and it fell apart into 5-6 pieces. Put it back together and screwed it in counter clockwise until tight. Works perfectly now.

-
@captain spaulding said:
I fixed it and you where exactly correct as this is what was wrong. I pulled the back end of the light off and noticed the metal ring with the two holes. I found SAK pliers worked the best and screwed it tight... or so I thought. I guess it is reverse threaded as I loosened it and it fell apart into 5-6 pieces. Put it back together and screwed it in counter clockwise until tight. Works perfectly now.
Glad you worked it out - don't remember the left hand thread, but it was a few years ago I fixed mine. Happy to help.

-
@hiraethus said:
I had similar problems with my LD20 - turns out the LED/circuit board holder had come slightly loose inside the head. Maybe the same construction on the E21? Unscrew the head from the body and inside there's a ring with two holes - I managed to wedge the tips of a pair of needle nose pliers in there and tighten the while thing back down, worked fine after that.Exactly what I was going to say. I believe they are reverse threads.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

The latest forum updates didn't play nice. I've removed the duplicate threads.