Wave Owners Club
-
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Would the awl from the Signal be short enough? I'm going to guess yes. Kampfer got to handle one so maybe ask him.
Spoiler:
No small bit driver:
/post/952616No small bit driver with an awl:
/post/872292
/post/985958No small bit driver with large flat screwdriver:
/post/872656No small bit driver with both an awl and large flat driver:
/post/964025
/post/966173 v1.0
/post/1015595 v1.1
/post/1115256 v1.2A hacked awl:
/post/1109927A hacked awl I did:
/post/1015547
/post/1019377My hacked Charge:
/post/1016880 -
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Would the awl from the Signal be short enough? I'm going to guess yes. Kampfer got to handle one so maybe ask him.
Spoiler:
No small bit driver:
/post/952616No small bit driver with an awl:
/post/872292
/post/985958No small bit driver with large flat screwdriver:
/post/872656No small bit driver with both an awl and large flat driver:
/post/964025
/post/966173 v1.0
/post/1015595 v1.1
/post/1115256 v1.2A hacked awl:
/post/1109927A hacked awl I did:
/post/1015547
/post/1019377My hacked Charge:
/post/1016880I don't think so, IIRC that awl from Signal is pretty thick....
To replace mini driver with awl, you can get another can opener, grind it down to a pointy sharp awl, but leave the hook untouch (ask me how I learn), it will be short, but a functional awl. -
[quote author=Demel link=topic=21437.msg1140682#msg1140682 date=1440173671]
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Would the awl from the Signal be short enough? I'm going to guess yes. Kampfer got to handle one so maybe ask him.
Spoiler:
No small bit driver:
/post/952616No small bit driver with an awl:
/post/872292
/post/985958No small bit driver with large flat screwdriver:
/post/872656No small bit driver with both an awl and large flat driver:
/post/964025
/post/966173 v1.0
/post/1015595 v1.1
/post/1115256 v1.2A hacked awl:
/post/1109927A hacked awl I did:
/post/1015547
/post/1019377My hacked Charge:
/post/1016880I don't think so, IIRC that awl from Signal is pretty thick....
To replace mini driver with awl, you can get another can opener, grind it down to a pointy sharp awl, but leave the hook untouch (ask me how I learn), it will be short, but a functional awl.
[/quote]
Have you done it? Any pictures? this seems like the most logical replacement for the driver. -
I still own a Wave, but it's not as it was ;)
Originally I carried it in it's stock configuration, but after a while I raided it for the innards. The bit drivers, scissors etc etc, all got repurposed in my Roundhouse Kick mod, and the Wave became the Ripple (or Wave Lite) and continued to be used without the internals. At that time I always had a SAK with scissors, and had a multi-angled ratchetting screwdriver with a good array of bits in my bag. As time progressed and the bag was dropped from daily carry, the Wave kind of fell by the wayside. If I needed the Wave in it's full glory (with all the internal parts), I just grabbed the Charge AL which has identical components but looked better doing whatever it needed to do :D
Now I've started cutting down, and offloading all the surplus, I need to make a call between the Wave and the Charge AL. The innards are still inside the Kick mod, and I decided to try completing the loadout of the Wave using Fuse parts. This has proved quite challenging (more than I anticipated) and still needs more work. Firstly the two stops that the plier heads sit on when closed had to be snapped off. One broke off clean, and the other didn't. It'll be a tricky job getting in there to tidy it up too, but I'll do it if I need to. Secondly, the Phillips is sitting alongside the large flat driver, and while they swing through most of their deployment arc quite freely, when stowed they actually jam each other into the handles and need leverage from a third party tool to get them out. I need to just slim down the Phillips fractionally to fix this. Finally, the last handle has the scissors, the long medium driver, and the can opener. The medium driver is a few millimetres too long, and actually rests on the thumb pad of the scissors, stopping the driver nestling fully home, and preventing the scissors being deployed. Again, this just needs a bit of abrasive work to shorten and reform the driver tip.
I think I need to complete this build and test drive it for a while before I finalise the decision to let the Charge AL go. I like them both for their own looks and feel, but want to be 100% certain the Wave will operate how I want it before making the call
-
Here are a few pictures of my Wave tool that I bought as a kit with sheath and bit set. The P3 was missing from the kit and I got a discount from Dick's for that and ordered one...Shown here with an Olight i3S though. Both lights fit well in the sheath's stretchy pockets on the side.




-
I got a Black Wave today to go with my stainless one.

-
Great pics guys

-
My new mini-Surge

-
@JustinCase said:
My new mini-Surge
Perfect configuration [emoji106]
-
Oh hey, forgot about this....I'm in again with a G2 Wave. Sorry, can't post pics at work....
Sent from my SM-G920R4 using Tapatalk
-
My new mini-Surge

Perfect configuration [emoji106]
Welcome back :)
I can post pics, so here comes my recent must-have on my last business trip:

Dream. Wish. Leave nothing undone. Repeat.
-
-
-
Im already in the Wave club, but had a Wave on its way to me. The smurfing USPS delivered to the wrong person 2 days ago so its gone now.

-
@captain spaulding said:
Im already in the Wave club, but had a Wave on its way to me. The smurfing USPS delivered to the wrong person 2 days ago so its gone now.

How do you know they delivered it to the wrong person?
I checked the tracking and it said it was delivered on Friday. It definitely was not delivered to me so someone else must of gotten it delivered to them as the post man scans the package once delivered.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





