Mega MT Test - Saw Test - In progress
-
-
Make a presentation of all contesters tested (saws + handles only)
-
Announce winner(s) among candidates (all VS all)
-
Show brief visual material from tests
-
Expand, explain. (You could use additonal footage)
Many contributing factors in SAK/multitool saw efficiency, as mentioned; length, thickeness, teeth pattern, handle width, position of the saw blade within handles (to the side or in the middle?), sawing technique, condition of the wood at hand. (
:P )I agree that Vic saws work better on green wood or wood that's recently dried out. Additionally, the Spirit's wood saw is really not a favourite of mine, not even remotely. I much prefer the saw on SAK Huntsman / Ranger / Handyman in 91mm size and on SAK Rucksack and Workchamp in 111mm size (slide-lock). The ones on liner-lock Vics, I think they work but I'm not impressed due to the combination of backspring tension, shape of the saw and its position on one side of the handle. I suspect that the saws on liner-lock Vics might be less prone to bending but I have nothing to support this claim.
Looking forward to seeing your videos

-
-
@Smaug said:
Shoot the video and do the editing, then see how long the video ends up. If it's > 30 min, break it down. < 30 min., leave it as one. This is kind of a speSmurfpillst video, so no need to clutter up your channel with lots of different similar videos.Zoidberg: Good point about the saw thickness; I had not considered that. But I would still bet on the longer one.
I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.
Challenge accepted.

I'll use a 130mm Wenger saw, and you use a Rebar or similar saw. We'll both shoot videos.
I think I'll win because of the longer saw blade length, and because the saw teeth aren't biased for pull- or push-cutting.
To make it more interesting, the loser gets banned from MTo for two days. :D
What do you say? :D
Shoot the video and do the editing, then see how long the video ends up. If it's > 30 min, break it down. < 30 min., leave it as one. This is kind of a speSmurfpillst video, so no need to clutter up your channel with lots of different similar videos.
Zoidberg: Good point about the saw thickness; I had not considered that. But I would still bet on the longer one.
I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.
Challenge accepted.

I'll use a 130mm Wenger saw, and you use a Rebar or similar saw. We'll both shoot videos.
I think I'll win because of the longer saw blade length, and because the saw teeth aren't biased for pull- or push-cutting.
To make it more interesting, the loser gets banned from MTo for two days. :D
What do you say? :D
If it stays within +/- 1 size class I would gladly. The 130 saw is very nearly double the rebar, which while I'm confident, is like saying I could beat a bow saw with my opinel. Just not gonna happen.
However, I'd gladly take the challenge with a wave, og supertool, 91/93mm, or surge (stock saw) :D
I also have to make a YouTube account and figure out how to post vids

I'll report back on this in a couple days.
I assume a standard 2x4?
Wow...Crazy Saw-off!
Honestly, not only we are dealing with a wide selection of saws from many different MTs, we have soooo many factors that will really affect the results: hand hold vs vice, height of the sawing platform, grip on tool, personal fitness, oil vs water vs nothing on saw, etc...
I discover from my own data that even a few inches apart, the density of the wood may feel different and yields different results, while everything is as tightly controlled as possible.
This is gonna interesting!

-
-
Make a presentation of all contesters tested (saws + handles only)
-
Announce winner(s) among candidates (all VS all)
-
Show brief visual material from tests
-
Expand, explain. (You could use additonal footage)
Many contributing factors in SAK/multitool saw efficiency, as mentioned; length, thickeness, teeth pattern, handle width, position of the saw blade within handles (to the side or in the middle?), sawing technique, condition of the wood at hand. (
:P )I agree that Vic saws work better on green wood or wood that's recently dried out. Additionally, the Spirit's wood saw is really not a favourite of mine, not even remotely. I much prefer the saw on SAK Huntsman / Ranger / Handyman in 91mm size and on SAK Rucksack and Workchamp in 111mm size (slide-lock). The ones on liner-lock Vics, I think they work but I'm not impressed due to the combination of backspring tension, shape of the saw and its position on one side of the handle. I suspect that the saws on liner-lock Vics might be less prone to bending but I have nothing to support this claim.
Looking forward to seeing your videos

Thanks for the support! I remembered doing some very quick comparison between 91mm vs Spirit, and did recall not liking Spirit saw, despite its advantage in build and everything. But this test should offer a more data to proof that which might be better for sawing.
-
-
@SAKnight said:
If it stays within +/- 1 size class I would gladly. The 130 saw is very nearly double the rebar, which while I'm confident, is like saying I could beat a bow saw with my opinel. Just not gonna happen.Fair enough.
However, I'd gladly take the challenge with a wave, og supertool, 91/93mm, or surge (stock saw) :D
OK, Wave then?
I also have to make a YouTube account and figure out how to post vids

Yep. or if you have a paid Photobucket account, those can host videos too.
I'll report back on this in a couple days.
OK.
I assume a standard 2x4?
Yep.
-
The pocket size MT saw tests are all finished yesterday. The data shown quite interesting trends, and I'm surprised how different is user experience vs preconception myself.
Testings will soon move onto the Mid size MT saw, which includes the following candidates:
Gerber Flik
SOG Pocket PowerPliers
Leatherman Wave
Leatherman Wave BO
Leatherman sidekick
Leatherman rebel
Victorinox 111mm Trekker
Victorinox 111mm Outrider
Victorinox 108mm Mauser
Victorinox Spirit -
come on don't keep us waiting
-
Many short plus a summary.

Hey, Zoidberg.
Sorry for making it confusing, I re-write what I have, so do you still stick to 'many shorts + 1 summary"?
:DSay I was looking for the info:
I would like to see the summary first - what tools worked better.
Then I would look at the tests in order of the sizes that interested me - everything in that size.
Followed by a quick visual comparison of the sizes for reference - gives it some perspective.
Summary plus different sizes plus size comparison, now I'm the one making it confusing. :D
+1 to Z's suggestions!
-
Many short plus a summary.

Hey, Zoidberg.
Sorry for making it confusing, I re-write what I have, so do you still stick to 'many shorts + 1 summary"?
:DSay I was looking for the info:
I would like to see the summary first - what tools worked better.
Then I would look at the tests in order of the sizes that interested me - everything in that size.
Followed by a quick visual comparison of the sizes for reference - gives it some perspective.
Summary plus different sizes plus size comparison, now I'm the one making it confusing. :D
+1 to Z's suggestions!
+2 (or 1?
)I just thought I'd add to confusion by simplifying with my previous post :D
Keeping things simple ain't easy :ahhh

-
Zoidberg, strmliner and firiki,
Thanks for all the suggestions. No worries, I only change my mind every 5 mins on how best to do it. Currently, I am leaning towards:
--Quick intro and info about the tests
--Show all twelve sawings in speed-up split-screen, while showing basic spec of each tools and results
--Make saw comparison pictures for all tools
--Show group results, comparative results, and answer some age-old questions(which brand is best, difference between 91mm vs 93mm, difference between layers, etc) -
Looking forward to your presentation
Saws and wire cutters are my personal benchmarks for evaluating an MT against other MTs
Thanks
-
Folks, just finished Mid size tools saw tests yesterday, and it's been a long and wild ride. So far accumulated total of 7 hours of sawing and data... :ahhh
Right now in process of editing and post production, and hopefully the first saw test video will be ready in a day or two. Please stay tuned!

-
Can't wait to see your results.
That's us mobile.
Nate -
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh can't wait
-
@ducttapetech said:
Can't wait to see your results.Me too and thank you for doing this

-
Hey, everyone!
Thanks so much for the warm support!

The first video about Pocket size multitool saw is out:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
This video will be just about the 3-4in pocket size MT, and more saw video about Mid and Large size MT will be released soon.
Hope you guys like this one. I will start a new thread/link for further discussion on this vid in general:
/topic/62327 -
That was great.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
