Scale Swap?
-
The issue is that the scale with the clip does not have a corkscrew/Phillips cut-out. You can still fit it onto the OHT with some file-work and a bit of black filler. Putting the back scale from the OHT onto the Sentinel would also leave you with the exposed liner.
-
@ufox9al said:
The issue is that the scale with the clip does not have a corkscrew/Phillips cut-out. You can still fit it onto the OHT with some file-work and a bit of black filler. Putting the back scale from the OHT onto the Sentinel would also leave you with the exposed liner.Thanks, ufox9al!
I suspected that the solution couldn't be that simple.
I recalled seeing that Wenger uses the same scale for their single blade Ranger as they use on their Ranger model with Phillips and awl. Thought Vic might do the same.
Oh well, another great idea shot to hell :<
.
-
Does anyone have a closeup of how the clip is attached to the scale? Maybe the clip itself could be removed and swapped. But then again, anyone can do that with any clip and the proper screws..
-
@Corrugated said:
Does anyone have a closeup of how the clip is attached to the scale? Maybe the clip itself could be removed and swapped. But then again, anyone can do that with any clip and the proper screws..I have several clips of compatible size that I've been tempted to install on my OH-GAK.
However, I haven't done it because:
-the scale could be ruined during clip installation
-I might not like the final result, but removing the clip wouldn't be a viable option.It'd be fairly easy to install a clip on the stock scale.
I'd do it if replacement scales were available so I'd have the option of reverting back to original scales.
.
-
Swiss Bianco (+B) sells replacement black Sentinel scales with the clip on them. You'll still have to file it.
-
Putting a clip on a SAK is a very easy mod i have done two so far. You can buy a clip and screws online from a knife makers supply or you can just buy a folding box cutter and use the clip and screws. Remove the scale you want to add a clip too this will help you avoid drilling a hole were the mounting stud is. Put the clip were you want it on the scale drill one mounting hole with a 5/64 drill bit (pratice drilling and tapping on a peice of scrap plastic to make your screws are the same size as mine) tap the hole with one of the screws. Mount the clip. Drill and tap the last two holes and you are done mounting the clip. Glue the scale back on with a little J-B Weld and you are done. Here is a link on the mod. /topic/10140
-
@Mike 56 said:
Putting a clip on a SAK is a very easy mod i have done two so far. You can buy a clip and screws online from a knife makers supply or you can just buy a folding box cutter and use the clip and screws. Remove the scale you want to add a clip too this will help you avoid drilling a hole were the mounting stud is. Put the clip were you want it on the scale drill one mounting hole with a 5/64 drill bit (pratice drilling and tapping on a peice of scrap plastic to make your screws are the same size as mine) tap the hole with one of the screws. Mount the clip. Drill and tap the last two holes and you are done mounting the clip. Glue the scale back on with a little J-B Weld and you are done. Here is a link on the mod. /topic/10140Before the OH Sentinal was offered with a clip I did my own also. I thought didn't take as much care and effort as Mike 56.
I simply drilled smaller holes then the screws and dropped a little clear nail polish in them before I put the screws in.
The difference made a tight good lock up and I haven't had any trouble with it.
So I know for a fact that the info that Mike 56 gave you would definetly work. -
I mounted the clips the same way i drill and tap rifles install scope mounts with the exception that i normally supper glue the mount in place and put a little supper glue the screw threads. After mounting the clip it held so well to the scales i did not bother using thread lock. Thinking about it now using a bit of thread lock on the threads like Swiss Man stated would not be a bad idea. maybe even a dab of J-B Weld under the clip.
Mike -
A little necro thread. I don't think this deserves a full thread on its own. Does swapping scales void victorinox warranty?
-
No, no effect at all.
Sent from my BNTV400 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
