Firefly / Moonlight mode
-
- Orange peel reflector = good flood. For short to medium distance, that's what you want mostly. If the Fenix LD09 I carry on my person had an orange peel reflector, I'd be a very happy camper.
Depending how heavily peeled is the Orange Peel reflector, I usually hate it for stealing the throw. The decisions for the balance between spot and flood + how big is the hotspot are strongly tied to the intended use of the light and the shape of the reflector. Some flashlight makers, instead of doing homework on studying those decisions, just op the reflector and call it ideal for close range use/smooth transition, or even just it to hide imperfection of light rings/halo beam pattern.
For a keychain light or AA light with firefly mode, due to its limited size of the reflector and low output, will inherently has a shorter throw, and an orange peeled will further reduce the throw even more. Another example is a 2x123 light with a slightly large head, mostly intended to be a thrower, an OP reflector will just steal the glory.
-
Wow!

- Orange peel reflector = good flood. For short to medium distance, that's what you want mostly. If the Fenix LD09 I carry on my person had an orange peel reflector, I'd be a very happy camper.
Depending how heavily peeled is the Orange Peel reflector, I usually hate it for stealing the throw. The decisions for the balance between spot and flood + how big is the hotspot are strongly tied to the intended use of the light and the shape of the reflector. Some flashlight makers, instead of doing homework on studying those decisions, just op the reflector and call it ideal for close range use/smooth transition, or even just it to hide imperfection of light rings/halo beam pattern.
For a keychain light or AA light with firefly mode, due to its limited size of the reflector and low output, will inherently has a shorter throw, and an orange peeled will further reduce the throw even more. Another example is a 2x123 light with a slightly large head, mostly intended to be a thrower, an OP reflector will just steal the glory.
Those are good points and smooth lenses are considered superior to OP ones, so I read at least.
About the quote in bold, I really like Fenix LD22 for a true all-rounder. Good proportions of flood on a throwy light.
In my limited experience, I found that smooth reflectors need much more light to produce a floody-ish beam but it often results in a light too bright for me. I might be wrong.I've had good luck with a couple of cheap lights with OP though, I don't mind the yellow-greenish tint much because of the smooth transition (hotspot not clearly defined) and the hazy, floody light they provide.
Good to see you, Comis

-
The only fancy light I've got is a zebralight sc52. Love love love the moonlight mode. And I can't imagine a superior UI, as far ability to access different levels instantly every time. It has a battery gauge, so I don't worry about it being dead, and the orange peel smooths out the beam without stealing enough throw to ever make a difference for my use.
I love the moonlight mode, I use it more than any other, though if it's not totally dark I use the alternate, slightly brighter low mode.
If I don't have my zebra on hand, I have 3 other lights I use. My $5 old school looking rayovac led (love this light), a little energizer 4xaa ~40lm that casts a circle, not unlike led lenser, which I like the option of. The last is an old rayovac 2xaa with no reflector, I'll take a pic. It's a dim little incan, but I love it and it lives next to my bed. These are all 1 mode flashlights, which I find very useful, as I don't have to think about how much light I want, I just use it.
Kinda rambling sorry ::)
-
My moonlight-only flashlight :)
Oh how leds have spoiled me. And I love incan.
The old 'hot wires' are EMP-proof, if that matters :D


-
@firiki said:
LEDs are sensitive to heat and we get loads of that in the summer so I keep a 2AA incan Maglite without battery cells in the car ;)My moonlight-only flashlight :)
Looks good
How's the runtime on that? I tend to get obsessed with runtimes ::)Funny enogh, I don't have a clue. It gets used over such a long span of time in short bursts, I've never gauged it. Similar to a mini mag as I'd say, seems similar brightness, just sans focus
-
@firiki said:
**LEDs are sensitive to heat and we get loads of that in the summer ** so I keep a 2AA incan Maglite without battery cells in the carThis is a new one to me. Most higher powered LEDs get MUCH hotter from their own internal heat when powered up than is possible in a car (even one parked in hot sun with all the windows wound up). That is why good light makers put a lot of effort into conducting heat from the LED to the body of the light to dissipate the excess heat, and why aluminium (or copper) is a better material than titanium for high powered LED lights.
I would have thought that the batteries would be more susceptible to heat damage than the LEDs in a light (particularly cheap "alkaleaks" (alkaline) batteries.
-
I have a Olight i3 and while it is a twisty so far it has been 100 percent reliable including a deployment to Afghanistan.
Don't use its low mode to much here at home but used it a ton while overseas. Not so much to keep night vision but to present less of a target on a blacked out base at night. Nothing worse then being shot on the way to the latrine.
-
@HarleyXJGuy said:
I have a Olight i3 and while it is a twisty so far it has been 100 percent reliable including a deployment to Afghanistan.Don't use its low mode to much here at home but used it a ton while overseas. Not so much to keep night vision but to present less of a target on a blacked out base at night. Nothing worse then being shot on the way to the latrine.
Fair point

But then, immurement?
-
**LEDs are sensitive to heat and we get loads of that in the summer ** so I keep a 2AA incan Maglite without battery cells in the car
This is a new one to me. Most higher powered LEDs get MUCH hotter from their own internal heat when powered up than is possible in a car (even one parked in hot sun with all the windows wound up). That is why good light makers put a lot of effort into conducting heat from the LED to the body of the light to dissipate the excess heat, and why aluminium (or copper) is a better material than titanium for high powered LED lights.
I would have thought that the batteries would be more susceptible to heat damage than the LEDs in a light (particularly cheap "alkaleaks" (alkaline) batteries.
True, LEDs exude plenty of heat so heat sinks and aluminium bodies are needed for good flashlights. I can't find the webpage I was reading this in info on; it would seem that the phosphorus used to create LEDs is affected by external temperatures on the long run, though that's probably the case for home illumination LEDs with little heat sink.
Anyhow, I am sure that leaving a (good) LED flashlight in the driver's door pocket all the time, winter to summer and again, isn't ideal. High tempratures falling, humidity condensation, electric and electronic components suffering from all this

-
This is partly why technology was so behind in cars for so long, durability of electronic components. Cars are tortured, certainly no place for high performance sensitive equipment :o
-
I have a Surefire E2L Outdoorsman that has a runtime of 100 hours on its lowest setting.This is the reason that I bought this light.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login