Official MT.O 30-Days Leatherman SQUIRT® Challenge!
-
Day 25: opening candy for kid

-
Got to use the Squirt for a genuinely useful task, but couldn't take pics!
In a laundromat in Paris waiting for the machine to finish. Lady enters and starts putting her stuff in a couple of the machines. I noticertainly she is having some trouble and ask if she needs a hand. She had closed the door of the machine but couldn't get it open again. Someone had pushed the buttons hard enough to dislodge the circuit board, so using the Phillips driver I was able to reach in and press the unlock button and open the door for her. She professed her love for me and I did a good deed :D
-
@TazzieRob said:
Got to use the Squirt for a genuinely useful task, but couldn't take pics!In a laundromat in Paris waiting for the machine to finish. Lady enters and starts putting her stuff in a couple of the machines. I noticertainly she is having some trouble and ask if she needs a hand. She had closed the door of the machine but couldn't get it open again. Someone had pushed the buttons hard enough to dislodge the circuit board, so using the Phillips driver I was able to reach in and press the unlock button and open the door for her. She professed her love for me and I did a good deed :D
Sounds like the start to an interesting story.
-
I have been very bad at filing my weekly Squirt Challenge reports - So you are going to get them one a day till the end of the challenge.
Pre challenge thoughts:
My needs of a multitool these days are so undemanding (office job and rented house) that having all my mutlitool power is a bit of an overkill >:D
So I was not too worried about the challengeHowever I did have three concerns:
[list type=decimal]-
No toothpick - One of my most used tools - However I got some regular tps from my better half :)
-
The pathetic, almost non functioning, bottle opener
-
And I was going to whinge about cutting up my apples with the tiny little blade - However after Obi1's heroics this month :o - I had better keep mum on that one

Week One Report
Overall I like the Squirt quite a lot, and it does feel good to have pliers - even if you don't use them much, and they are wee!! :)
I am a big SAK man and I love SAK scissors - However these Squirt scissors are really pretty good - At least as good as a Vic Classic I'd say - and as good as a Wave's.So mainly minor jobs around the home and office - cutting paper, grooming etc etc - All good
And then on the Friday what I was dreading happened........ :o
Friday night drinks in the office
A colleague wanders over to me with a non screw top beer bottle and asks if I have an opener.
Now I know we all like to whip out our multis and look cool and 'save the day' .....
..... And you are not going to do that with the Squirt's excuse for a BO.
So do I pretend I don't have one? or just go for it?? ............. Well I went for it
Fortunately the lads had already had a few beers and did not notice me struggling - In fact they were quite impressed - One asked me if it was Chinese made - To which I slapped him around the head and told him it was an original top quality Leatherman from the good ole USofA. They both seemed very impressed and had a little fiddle :D
My interesting job was fixing up a carpet that my cat had attacked - The carpet meshing had come apart and knots had been pulled out and it all needed sewing together again. I used thick thread and a thick regular needle!! (Regular tool - phew) - The Squirt was used to trim off all the pulled out knots and thread, and the little sd was quite good a pushing wool back into the carpet as I sewed.
The pic below is an 'after' pic - I forgot to take a 'before' shot - But it was a mess - B100dy cat
Fails for the week:
I keep a Cybertool Lite in my bedside drawer and I used the torch one night, and also the magnifying glass to read some small print on another day. Technically that is two fails ...... I used another multi.
I should have got up and gone and got a torch and regular mag glass - But bed was too comfy. :DWatch this space for Week 2 report.... This was when I got upset :( :o ......

-
-
Day 27: freeing Signal from package

-
Figure 4 deadfall trap in the woods. No saw, no problem.
-
Knife to cut notches and shapen the pieces.
-
File to fine tune.
-
Rat roast for dinner.
-
I love my PS4 (actually, all 4 of them), but I am ready for this nuttiness to end. Part of the fun of this challenge is when we start it, and the other fun part is when we end it.
-
DAY 27 Green Tea time


-
Great piggy back for ps4


-
Awesome idea!

-
Day 28: moon cake

-
Day 27:
The jack was loose on my bass at church this morning. Real fix happened later, but this got me through rehearsal.

-
Week Two Report
All still going well with the Squirt
Enjoying the carry/experience - Missing my SAK :( - Squirt feels a little smallAll the normal undemanding jobs around the home and office
And then we came to the weekend.
I had to fix a spring that had come loose on a sofa - which involved taking the bottom hessian like cover off the sofa - which was held on with staples - see pic.
I started off using a small regular screwdriver (no Challenge fail :)), then reminded myself this was the Squirt Challenge month, so had better get the Squirt onto the job - I used the flat Phillips driver and it performed admirably as a staple remover, with the flat point getting under the staples beautifully, then levering the staple up and out.**However ** ..... after the job was done, I realised that the job had loosened the rivet on the screwdriver pivot ..... and the SD was now all wobbly
:o
The staples were really embedded in the wood, and required quite a lot of torque to remove - So I guess the rivet got forced apart a bit ......
Waaaahh - I get quite attached to my tools - and they are so expensive in Oz - So I was a bit upset. :( ... and wished I had stuck with the regular SD !!I am going to try hammering/repeening the rivet (unless anyone has another suggestion) .... and hopefully all will be well again :)
However this may count as a Squirt fail? ??? .... The job was just a bit too tough....
My fails for the week:
I carry a Vic Signature Lite on my keyring, and have not taken it off this month - However I rarely carry keys (public transport user, and wife at home) and have certainly not used it - So I think I am good??
After the staple incident I needed to drill a pilot hole in the wood to reattach the spring - I was still a bit upset at this point and did not want to take any more risks - So reached for the Vic Electrician in my toolbox, and used its awl to make the hole.Stay tuned for Week 3 report and how the Squirt fared on my camping trip - Plus an intersting Squirt vs Dime contest....... :o

-
Discovered last night, during the bloodmoon, that the Squirt blade is actually surprisingly good at cutting through carrots.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login