Super Tool 300 BDS Hack.
-
Very cool looking mod. 8)
Were the Surge scissors a straight drop in? (except cutting in the locking nub of course. ;) ) Any problems with clearance when closing the pliers?
-
@sawman said:
That's nice but I prefer the file over the saw
@sir_mike said:
That is good work but I too would prefer the file over the saw!
The pre disassembly plan was to remove the serrated blade. However I had failed to note the different thickness and the detent feature. Because of the type of work I do the saw gets used more than the file. The Surge has the exchanger so moving the file to the Surge was the better option for me. I have spares of both so swapping or replacing them later isn't a hassle.
Arrrggh!!! Now I'm wondering if I should try and fit the exchanger in...

@enki_ck said:
Very cool looking mod. 8)Were the Surge scissors a straight drop in? (except cutting in the locking nub of course. ;) ) Any problems with clearance when closing the pliers?
Thanks. No, there was a bit of work involved. The first cut and fit worked really well. Then when cleaning up the messy file work I took too much off and got some play. Bit of sweat and tears and it locks up solid again. There is no clearance issue with the pliers when closing, everything works and fits as it should. Maybe I'll add a cutting hook to the serrated blade someday but for now I'm happy with this setup.
-
IT IS BEAUTIFUL!!!!
-
Very nice! I like the needle nose pliers, they give greater versatility and that's the point of a multi, but I do wish there would be more blunt nose options out there because lets face it, some times you just need to muckle onto something. There is also just a certain aesthetic to this profile, it's squat and tough looking, a dwarven multi. And I'd happily swap out a few drivers to have a "typical" size straight, #2Ph and then just a bit driver for everything else on my Rebar.
Guess I'm odd, I'd have wanted to keep the file and carry my Compact or Rambler for the scissors, but as is, that would just force me to carry something like an ignition file- oh the horror. :) But other than that one preference, this looks good.
-
Nice mod Dr Z.
-
@ironraven said:
Very nice! I like the needle nose pliers, they give greater versatility and that's the point of a multi, but I do wish there would be more blunt nose options out there because lets face it, some times you just need to muckle onto something. There is also just a certain aesthetic to this profile, it's squat and tough looking, a dwarven multi. And I'd happily swap out a few drivers to have a "typical" size straight, #2Ph and then just a bit driver for everything else on my Rebar.Guess I'm odd, I'd have wanted to keep the file and carry my Compact or Rambler for the scissors, but as is, that would just force me to carry something like an ignition file- oh the horror. :) But other than that one preference, this looks good.
It is used only at work for very specific tasks hence the plier head and tool load.
I don't see any sak scissors being suitable nor would I want to clean and dry them every night.
Also I'm not without files, there are normally at least a few other multitools in reach.Thanks for the comments guys, I appreciate all the feedback.
Hey Leatherman, make a file accessory for sheath carry, 3"x1" diamond on one side and wood/metal on the other.
-
Sweet mod!
live from Nate's mobile
-
@zoidberg said:
<a href="https://flic.kr/p/nDE1Gt" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7371/14209619083_8013c63456.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="https://flic.kr/p/nBSxLw" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5199/14189431954_e38cf3304c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/nko8s7" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7426/14002823078_01b36760a7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/nko8ky" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7359/14002822698_e2f10ba7a3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/nBzUNx" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7339/14186185811_7653d07138.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/nkobvy" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7382/14002833370_44f3633724.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/nkomgx" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7439/14002866197_6faf902ff2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

-
+1Nice one Zman

-
Thank you guys.

-
Bump for reference
-
Bump for awesomeness :D I really love this mod and it's great that it is made just the way you want for work

-
Thank you Poncho.

-
-
Thank You Zoidberg for inspired
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Bye Bye Phillip


-
Very impressive! I might actually be able to carry a Supertool with scissors and bit driver! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
