CyberTool owners thread
-
@50ft-trad said:
CT41 is what the Swisschamp should have been.
...unless you have a use for the fish scaler/ruler/hook disgorger
Swisschamp is a good bit more affordable and popular than the CT41 too. CT41 was overpriced, and got pulled from the US market.
Yeah, I have no use for the fish scaler and wish they would take it off the swisschamp, then it would be one layer thinner and better. I guess some here have used the fish scaler for skewing french fries off other people's plates! :)
-
Personally, I think the CT41 is worth the premium. If someone has a specific need for the fish tickler or the mag glass, then fair play to them. I still however think the CT is a superior pocket tool.
The Swisschamp for me is rather like the Workchamp, Farmer, Minichamp, and a few other popular SAKs, and has never interested me. I have bought one for someone else and they were highly delighted with it, but for my own needs I waited till I could afford a Cybertool, and don't regret it in the slightest
-
@50ft-trad said:
Personally, I think the CT41 is worth the premium. If someone has a specific need for the fish tickler or the mag glass, then fair play to them. I still however think the CT is a superior pocket tool.The Swisschamp for me is rather like the Workchamp, Farmer, Minichamp, and a few other popular SAKs, and has never interested me. I have bought one for someone else and they were highly delighted with it, but for my own needs I waited till I could afford a Cybertool, and don't regret it in the slightest
I too have had a few or more Swisschamps pass thru my fingers from time to time but just never really warmed up to them. I am not sure why but just never much did. I also have a Minichamp now on my keys but not feeling it either so it will be put up to a new home soon.
I also managed to snag a CT29 for a great price and with that one I might sacrifice an Explorer to have the mag glass and scissors modded to the CT29 if I can find some one to do that. Maybe I could do the scissor's layer, then a mag glass and lite in another layer as I also have a Spartan Lite here!
Can someone tell me what is the right belt pouch for the CT41 is? Part number? Link?
Thx.
-
A couple observations from my first day with a 34:
Victorinox makes some great sheaths. Ok this has nothing to do with the cybertool tool but with it I got a brown leather sheath with a snap button and it just screams quality. I love that they invest in the accessories that come with their tools.The cybertool has a great tool set. I do think the 5 layers is as thick as I would go. It feels large, but not overwhelming. It fits very well in the coin pocket.
As people have already stated, I wish victorinox released a bit set to compliment the tool. I don't mind the extra storage, but a full set would be nice.
Quality-wise everything functions beyond expected. Quality is the one area that Victorinox blows everyone out the water. When I get any product from them, it performs flawlessly.
Overall this is a keeper. if I had to lose the driver it would still be a great tool (deluxe climber/tinker) but the driver us what makes this tool unique. Glad to have it in my collection.
-
@sir_mike said:
Can someone tell me what is the right belt pouch for the CT41 is? Part number? Link?I'm using the 4.0521.3 (5-8 layer black leather) pouch, which fits very well:
They have several other pouch designs with the same capacity in various materials - just search for Victorinox 5-8 layer.
-
I EDC a 41 . I use a dangler clip , no problems with it as an EDC . I might do a scale changeout someday .
My buddy who's a locksmith also EDC's one . We have two in reserve , one nib , one modderfodder.
Chris
-
@Smaug said:
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
-
A Cybertool with the long Phillips like the one in the workchamp would be great
Sent from my iPad using Tapatalk
-
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)
While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
-
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)
While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
Want me one so much but they are expensive.
-
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)
While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
I am also a fan of having both
-
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)
While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
I am also a fan of having both
EXCELLENT!!!!
Lacks only a spatula and fishscaler....(so folks can complain about something) :D -
[quote author=Smaug link=topic=50953.msg1144611#msg1144611 date=1441048623]
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
I am also a fan of having both
EXCELLENT!!!!
Lacks only a spatula and fishscaler....(so folks can complain about something) :D
[/quote]they complain as it, "why do you need BOTH"
oh well, I like it just as it is, and the hook is from a Compact, so it has a file 
-
[quote author=Smaug link=topic=50953.msg1144611#msg1144611 date=1441048623]
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
I am also a fan of having both
EXCELLENT!!!!
Lacks only a spatula and fishscaler....(so folks can complain about something) :D
[/quote]You trade me your XLT and I will have all that stuff.
-
This is sorta my grail. Cross-compatibility between 1/4" and 4mm bit (both ways). :D
Not sure how much I'm really going to be using that, the CT does cover most of my screw-driver needs. Still, love the versatility and options it offers me.Just to clarify, the SwissTool Bit-Wrench holds a CT bit ;)

-
@Etherealicer said:
This is sorta my grail. Cross-compatibility between 1/4" and 4mm bit (both ways). :D
Not sure how much I'm really going to be using that, the CT does cover most of my screw-driver needs. Still, love the versatility and options it offers me.Just to clarify, the SwissTool Bit-Wrench holds a CT bit ;)
I'm looking for a similar converter. I wish there were a 5mm Allen wrench bit for the CT driver.

-
@Mr. Whippy said:
This is sorta my grail. Cross-compatibility between 1/4" and 4mm bit (both ways). :D
Not sure how much I'm really going to be using that, the CT does cover most of my screw-driver needs. Still, love the versatility and options it offers me.Just to clarify, the SwissTool Bit-Wrench holds a CT bit ;)
I'm looking for a similar converter. I wish there were a 5mm Allen wrench bit for the CT driver.

That is what I use

See here
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D