What Did You Use Your Multitool For Today?
-
Fine tune and install robotic end of arm tooling, here cutting and trimming hoses and zip ties so that there are no loose ends that can be caught when the robot moves fast in 6 axes.

-
Inside the trash compactor again.
*loosened some screws on the motor wiring compartment. I quite like these screws that some European companies are using lately: they have Torx, and a slot for a flat head screwdriver. So if one has the right tool, (Torx) it's very easy. If not, everyone has a large flat head, right? Except me. I had my Compact, so only had a medium flat head. But one end of it gripped a Torx lobe OK, and the other end was in the slot. I managed to do this without slipping or busting my knuckles, which I consider a minor miracle with the junky combo tool flat head:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsykt0iifs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsykt0iifs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Removed some Phillips' to take off the back cover:
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpsmojzvw3e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpsmojzvw3e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>...and punched an extra hole in a belt with the reamer:*
<a href="http://s134.photobucket.com/user/jzorns/media/Mobile Uploads/image_zpssjcnrtpm.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Mobile Uploads/image_zpssjcnrtpm.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>MT was a modded Vic Compact; hook and corkscrew were replaced with Phillips and the reamer.
-
Today was my first day back at work after my hols so my work surge and bit kit were out to play after a few weeks in the dark recesses of my locker.
Used the surge with philips and hex bits to strip out and replace 3 solenoids for the backwash system on the water treatment plant. Then the bit extension with security torx to replace the main control unit for the pyrometers on the rolling mill.
Also in the same substation as the pyro controller I came across a small packing crate with the lid screwed down, so the surge was out again so I could be nosey and see what was inside, then close it back up like I was never there. It was boring though, just a lead plate for the gamma source shutter that's used for thickness detection on our steel plates.
The surge is goooooood, oh so goooooood ☺Sent from my SM-P600 using Tapatalk
-
Now I'm doing a tool test to see which bottle opener is best for Stella cidre bottles. The competitors are all leatherman, surge, charge, wave, squirt and juice. It's all in the name of science ya know [emoji6]
-
Cutting Pumpkin Pie


-
Used my Wingman to open the clamshell packaging of another multi-tool(Rebar), all recursive like.
I have also got in the habit of using the Wingman medium flat screwdriver to open stubborn pistachio shells where there is just a line but not a full opening.
-
Cut a discount coupon with the scissors of the Juice S2 and signed it with the pen of the Midnite Manager while waiting in line. Super market ninja level 10. No pictures, sorry.
-
Installed a new light switch plate with my Squirt P4.
-
The pointed nail file of the VIC Cadet and the pliers on the VIC DeLuxe Tinker to remove a sim
card from the insane locking system of an old Nokia.Yes, I know.
It's somewhat hard to believe
:D -
Sog SP2 to fix a stapler. Again

And to fix a cabinet door that managed to fall off somehow. -
Used my Powerlock and Vulcan to put a new chain on my Suzuki GSX 750e.





That's us mobile.
Nate -
I don't like it, I love it
-
Thanks styx
That's us mobile.
Nate -
SP2 got to help me put some molding around my basement door. Pliers used to pull old nails out of door frame. Used the file to remove enough material to allow a piece of molding to fit that was just a millimeter or two to long. Used the knife to make a piece fit that was more than a few millimeters too long ;)
-
NIce work out for the SOG SP2
That's us mobile.
Nate -
Rebar to remove some thorns
-
Ouch!
That's us mobile.
Nate -
Using Scissor open mail
WOOOT FROM RUSIA !! THANK YOU loki-mobile ..
.. HACKED MACHINE TIME !!
-
Score!
That's us mobile.
Nate -
@Obi1shinobee said:
Using Scissor open mail
WOOOT FROM RUSIA !! THANK YOU loki-mobile ..
.. HACKED MACHINE TIME !!Nice !
Give a review on how you like them.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login