What's your latest SAK?
-
My most recent SAK was a used Farmer back in Feb. 2015. Just a little dinged up but fills the bill for a user/beater. tom.
-
After 2 failed attempts at making a wrench scale, I finally have success with design 3. :D



The wrenches work great! One side is to turn counterclockwise, the other clockwise. I put that scale as the front to keep the blade layer from damage. Also the cap lifter works great to retain the 1/4 bit for bits that are slightly on the thin side and want to fall out.
-
Glad to see it put together.

I have a feeling it might be popular. ;)
-
Awesome

-
Yes please! (but without the keyring attachment)

-
@Syph007 said:
After 2 failed attempts at making a wrench scale, I finally have success with design 3. :D


The wrenches work great! One side is to turn counterclockwise, the other clockwise. I put that scale as the front to keep the blade layer from damage. Also the cap lifter works great to retain the 1/4 bit for bits that are slightly on the thin side and want to fall out.
beautiful!
For me, if you could just fit a CT Bit driver in there I would be dehydrated from drooling -
Very cool Syph

-
I have always had a soft spot for this model(unlike Victorinox) so even though I have not purchased any SAK's in awhile I knew I would kick myself if I did not pick up this coyote brown electrician plus from Swiss Bianco


-
@Syph007 said:
After 2 failed attempts at making a wrench scale, I finally have success with design 3. :D
The wrenches work great! One side is to turn counterclockwise, the other clockwise.** I put that scale as the front to keep the blade layer from damage.** Also the cap lifter works great to retain the 1/4 bit for bits that are slightly on the thin side and want to fall out.
Good thinking

-
Electrician Plus with scissors
-
SwissTool and Spirit in BO and new black Nylon scales for my Climber.
.jpg)
-
New to me Camper. I got it to replace my Waighter in my wilderness survival kit. It meets my minimum tool preference for an outdoor SAK.

-
-
Craftsman with fishscaler. And a Huntsmanesque Woodsman. And another Lumberjack. And a Master Craftsman.




-
-
@Syph007 said:
After 2 failed attempts at making a wrench scale, I finally have success with design 3. :D


The wrenches work great! One side is to turn counterclockwise, the other clockwise. I put that scale as the front to keep the blade layer from damage. Also the cap lifter works great to retain the 1/4 bit for bits that are slightly on the thin side and want to fall out.

Man thats nice!

-
Couple of Solos in from member silveredge007!

-
Nice. I love the 108mm Solos.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


