And so it begins.... (My adventures into Alox!)
-
Yep Ti-6-4. Steel would be way too heavy.
-
These are 93mm scales right?
If you were to carry some bits you would not even need the inline phillips. Would make for some interesting tool combos.
Yep 93. I will have scale options with this type of thing for all sizes though.
Have any issues with bolts slipping or being rounded off?
In the 5 minutes Ive test this, zero issues! :D
Its pretty solid, I'll give one an abuse test though.
Sorry I already called dibs on being the test pilot.
-
Damn beat to the Ti 84mm. Eh well. I have one in the mill so I guess it will be the first one for me :P
-
@tattoosteve99 said:
Damn beat to the Ti 84mm. Eh well. I have one in the mill so I guess it will be the first one for me :PNice.
-
This thing is COOL :D




The wrenches work great! One side is to turn counterclockwise, the other clockwise. I put that scale as the front to keep the blade layer from damage. Also the cap lifter works great to retain the 1/4 bit for bits that are slightly on the thin side and want to fall out. Id like to pretend that was by design, but its just a very happy coincidence.



:D
-
Wow that is awesome.
will there be some type of marking to know which side is which? -
Send it to me for through testing
-
It's like a functional skeletonization, works well and looks really cool.
My questions for you are: Are you still cutting the crosses by hand or are they wjc in small batches and you just finish them for a snug fit?
Do the scales need any machining? They look a little tumbled. -
@WWW said:
It's like a functional skeletonization, works well and looks really cool.My questions for you are: Are you still cutting the crosses by hand or are they wjc in small batches and you just finish them for a snug fit?
Do the scales need any machining? They look a little tumbled.The scales are tumbled ya. I thought people would want anodized finishes.. turns out 90% of people prefer the matte gray natural finish. Overnight tumbling with cermic pyramids are what Ive been doing. I do however hand sand the surfaces and edges otherwise they wouldnt turn out as smooth looking.
I do still cut the brass/copper crosses by hand to fit, but my technique has improved both on quality and speed. I can cut and fit one in about 15 minutes now. First try was 2 hours... but I had to make some spcial square punches to peen them from the backside.
Jewelers sawing is also very relaxing. I learned from this video. :D
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@Syph007 said:
The scales are tumbled ya. I thought people would want anodized finishes.. turns out 90% of people prefer the matte gray natural finish. Overnight tumbling with cermic pyramids are what Ive been doing. I do however hand sand the surfaces and edges otherwise they wouldnt turn out as smooth looking.I do still cut the brass/copper crosses by hand to fit, but my technique has improved both on quality and speed. I can cut and fit one in about 15 minutes now. First try was 2 hours... but I had to make some spcial square punches to peen them from the backside.
Jewelers sawing is also very relaxing. I learned from this video. :D
Will take a look at the video later, but thanks for the link.
I find interesting that folks don't want ano, one of the main + point in using Ti IMO is that it seems easier than Al to color. ??? Perhaps is just me.
-
@tattoosteve99 said:
Send it to me for through testingI already interviewed for the position.
Syphilis does the layer behind the bolt wrench thing matter? Like as a backstop.
-
Send it to me for through testing
I already interviewed for the position.
Syphilis does the layer behind the bolt wrench thing matter? Like as a backstop.

-
ABC might be re-making MacGyver. He's gonna need a Syph custom.
Will
-
Send it to me for through testing
I already interviewed for the position.
Syphilis does the layer behind the bolt wrench thing matter? Like as a backstop.
Lol
Naw i had it on the back first then realized the blade would get trashed. If it had a full liner though that could solve that.
-
Send it to me for through testing
I already interviewed for the position.
Syphilis does the layer behind the bolt wrench thing matter? Like as a backstop.

+1 hahaha
-
Send it to me for through testing
I already interviewed for the position.
Syphilis does the layer behind the bolt wrench thing matter? Like as a backstop.

+1 hahaha
Lol, stupid phone.
-
[quote author=tattoosteve99 link=topic=34772.msg1160824#msg1160824 date=1444085499]
Send it to me for through testingI already interviewed for the position.
Syphilis does the layer behind the bolt wrench thing matter? Like as a backstop.

+1 hahaha
Lol, stupid phone.
[/quote]The autocorrect probably picked up that word, maybe you were communicating with your doctor alot? :D
@Demel said:
Wow that is awesome.
will there be some type of marking to know which side is which?Yes ideally I would like to have markings but a laser engraver is out of my price range, so Im not sure what to do. I have hand stamps of letters and numbers and thats about all I can think of.
So I'll put a C for counterclockwise and a C for clockwise that should help!

-
How about a + and - stamp ?
-
Could pick up an arrow metal stamp to indicate direction of rotation. Would stamping displace too much metal or deform the scale too much?
-
@Syph007 said:
This thing is COOL :D(...)
The wrenches work great! One side is to turn counterclockwise, the other clockwise. I put that scale as the front to keep the blade layer from damage. Also the cap lifter works great to retain the 1/4 bit for bits that are slightly on the thin side and want to fall out. Id like to pretend that was by design, but its just a very happy coincidence.(...)
Do you really need two sets of wrenches? Can't just one be enough? If so, you could use the other to have either other sizes (metric/imperial) or different tools (O2 key, for instance).

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login