What is being carried today ?
-
@50ft-trad said:
Wave in nylon sheath.
Had a lot of (50-60) heavy cardboard boxes to cut down to size to fit the recycling stations´ miniscule opening today.
I was prepared that the blade would drag at the end of the work but I was amazed that it performed so well. I have done this exercise with, on paper, much better steels but in reality I can´t say there is much difference. I think Leatherman have a good control of teh heat treat from such a long experience with the steel just like Victorinox really take advantage of the steel they use to "over perform". Both of course also have nice, thin blades that cut well.
I've never had a problem with the blade steel on the Wave. Leatherman have made a good job of that in my experience, and I see no reason to own the premium steels when basic steels treated well perform so good (and that applies to knives by other manufacturers too). Also easy to maintain and touch up the edge when neededNo reason?
I am cool if I have the best steel, duh.
-
@50ft-trad said:
Wave in nylon sheath.
Had a lot of (50-60) heavy cardboard boxes to cut down to size to fit the recycling stations´ miniscule opening today.
I was prepared that the blade would drag at the end of the work but I was amazed that it performed so well. I have done this exercise with, on paper, much better steels but in reality I can´t say there is much difference. I think Leatherman have a good control of teh heat treat from such a long experience with the steel just like Victorinox really take advantage of the steel they use to "over perform". Both of course also have nice, thin blades that cut well.
I've never had a problem with the blade steel on the Wave. Leatherman have made a good job of that in my experience, and I see no reason to own the premium steels when basic steels treated well perform so good (and that applies to knives by other manufacturers too). Also easy to maintain and touch up the edge when neededNo reason?
I am cool if I have the best steel, duh.
Oh, excellent! I think the best steels are the ones that are easy to sharpen on the go, so I must be cool too.
Not sure many people who know me would agree with me being cool though 
-
Honestly I just carry/use one multi-tool (for a couple of years now). I like all of them and collect some of them - but they're not all that useful to me.
So, that's the Leatherman Squirt ES4 that I choose to carry. And here's why:
- It's small and light, actually carry-able in any situation, not just in the truck or woods.
- It has a blade that's good enough for most things.
- The screw drivers are sturdy and work for common screw types (flat/phillips), if not, carrying a (meh quality I must say, if you start using the LM kit the bits don't keep their edge long) bit kit doesn't cut it anyway so I'd want a dedicated screwdriver.
- Scissors are good, no problem there.
- I don't need the file very much, but it works fine despite the size.
- If I lose or destroy it, its 20-25USD to replace, so I don't fear punching, hammering, etc.
and finally.. the pliers are actually useful. For all intents and purposes, bigger pliers work way better on dedicated pliers than multis because they're sturdier, always.
Except that at this ES4 small size, it does not need to be sturdy. Not only that but the needle nose is thinner than most dedicated pliers (and thinner than the PS4 obviously) so sometimes I want my ES4 instead of a dedicated tool, which is a luxury not many multis can brag about.
Being into electronics, the wire strippers are actually nice to have around when I don't have my dedicated tool (i.e. on the field/at friends) while the ones from bigger mt's are useless (on big wires, the blade or scissors work better and with more shape/sizes...).So here you go, my only and daily driver, the mighty ES4!


-
@50ft-trad said:
@50ft-trad said:
Wave in nylon sheath.
Had a lot of (50-60) heavy cardboard boxes to cut down to size to fit the recycling stations´ miniscule opening today.
I was prepared that the blade would drag at the end of the work but I was amazed that it performed so well. I have done this exercise with, on paper, much better steels but in reality I can´t say there is much difference. I think Leatherman have a good control of teh heat treat from such a long experience with the steel just like Victorinox really take advantage of the steel they use to "over perform". Both of course also have nice, thin blades that cut well.
I've never had a problem with the blade steel on the Wave. Leatherman have made a good job of that in my experience, and I see no reason to own the premium steels when basic steels treated well perform so good (and that applies to knives by other manufacturers too). Also easy to maintain and touch up the edge when neededNo reason?
I am cool if I have the best steel, duh.
Oh, excellent! I think the best steels are the ones that are easy to sharpen on the go, so I must be cool too.
Not sure many people who know me would agree with me being cool though 
I agree 100% Al, my favorite blades are those which are easiest to sharpen. I don't mind needing to touch-up a blade for maintenance reasons. What I do mind is sweating over a sharpening stone struggling with a stubborn steel.
Therefore, Victorinox, Leatherman, Gerber and SOG blades are ALL superb IMO.
-
Leatherman Squirt PS4 and Victorinox Cadet. These two make a good minimalistic carry without much redundancy.

-
Nice Steve!!
-
Wave pocket carry. (Back to gym shorts)
I really need to order like 5 more kick clips.
-
Nice choice Steve...made me take my OG Wave today.

-
-
Nice ST

PST today

-
SC & Wave
-
Nice guys!
That's us mobile.
Nate -

That's us mobile.
Nate -
Nice Surge !

-
My MUT today.
Sent from my iPhone using Tapatalk
-
-
^

Supertool Saturday


-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





