And so it begins.... (My adventures into Alox!)
-
@Flint Hills said:
Syph, which do you think is a better setup, the two opener springs with the openers opposite the 3d Phillips or single spring with bottle opener opposite 3d Phillips? I'm thinking of trying to do this myself as my first real mod, which one is easiest to get to work out?The dual opener springs mod is easier as you dont have to alter the springs at all. For the phillips / bottle opener one you use a single blade spring, but you have to alter one end to be the same shape as the opener layer end that is used on the bottle opener.
-
@Flint Hills said:
Syph, which do you think is a better setup, the two opener springs with the openers opposite the 3d Phillips or single spring with bottle opener opposite 3d Phillips? I'm thinking of trying to do this myself as my first real mod, which one is easiest to get to work out?
The dual opener springs mod is easier as you dont have to alter the springs at all. For the phillips / bottle opener one you use a single blade spring, but you have to alter one end to be the same shape as the opener layer end that is used on the bottle opener.
Thanks so much, I will probably have more questions once I get into it, lol! I think I am going to go for a small pen blade in place of the can opener if that will work.
-
Syph, will the Phillips/bottle opener layer work on 91mm SAKs?
Will
-
If you're making custom pieces anyway could make a layer with a true 1/4" driver? Might be a bit wide but seems like it would leave room for a bit holder. Watching this progression it almost seems as though these aren't really Vic models anymore. More of a true custom.
Sent from Tracy Island
-
Syph - now that you're making parts, which is awesome, would it be possible to make a 91mm back spring for a Phillips/opener layer? Bet it would be popular.
-
Syph - now that you're making parts, which is awesome, would it be possible to make a 91mm back spring for a Phillips/opener layer? Bet it would be popular.
It isn't the spring that is the issue, there is not enough room. The parts hit one another.
Ahhhh. I see.
-
@Syph007 said:
I think since alot of people dont care for the can opener, this should be the new standard 3 layer model. Stop thinking of the opener layer as the opener layer, but instead the driver layer and move it to the middle. Works great. :D
The two openers fit the philips screwdriver width, right? I've seen this in other mods from you. Why not use a modded can opener turned medium sized flat screwdriver? Or a second bottle opener, with a smaller tip and maybe the inside curve sharpened to use as a shell package opener?...

It's my OCD speaking, hate to see unused spaces in there...

-
I think since alot of people dont care for the can opener, this should be the new standard 3 layer model. Stop thinking of the opener layer as the opener layer, but instead the driver layer and move it to the middle. Works great. :D

The two openers fit the philips screwdriver width, right? I've seen this in other mods from you. Why not use a modded can opener turned medium sized flat screwdriver? Or a second bottle opener, with a smaller tip and maybe the inside curve sharpened to use as a shell package opener?...

It's my OCD speaking, hate to see unused spaces in there...

I am sure Syph will be along to answer this but for now the reason just the one bottle opener is used has to do with the fact it is a little narrower because only one back spring is used. Unlike the double opener across from the inline phillips which uses two.
So it not really that much unused space.
-
The amount of unused space in the dual spring mod, that is the space on either side of the phillips is 0.060" not enough to fit another tool in there. And the benefit of that mod is that extra space is used up by the lugs on the phillips and it prevents them from hitting things like the scales.
The washer needed with the bottle opener is 0.020" to make it thick enough to be the same as the phillips in the one blade spring mod. This is the nicest setup if you dont need a can opener.
-
-
I built another Ti 84mm mod. :D These things are pretty sweet, but man they do take alot more hours to build than the equivalent 91mm versions. That is one reason I stopped doing them before as it didnt make sense to me to make something smaller that ended up costing more...
I do see the appeal though very pocketable size with great functionality. :D





-
Lovely 84mm there Syph. Might be more trouble and cost but the 84mm is a really convenient SAK for those of us that spend a lot of time driving a desk and don't want to cause a quiet moment in meetings by fiddling with a 111m when they get boring ....

-
@Syph007 said:
To spice things up I have a new tool layer coming out for 91/93 size that is a drop in replacement for the saw (uses saw backspring). Its being waterjet right now.... any guesses? Its one tool but I did up 3 versions of it since I couldnt decide what I liked best. Its been on my list of requested tools for some time now.Did I miss the debut? Lots of nice mods lately, not sure if this was one of them.
-
To spice things up I have a new tool layer coming out for 91/93 size that is a drop in replacement for the saw (uses saw backspring). Its being waterjet right now.... any guesses? Its one tool but I did up 3 versions of it since I couldnt decide what I liked best. Its been on my list of requested tools for some time now.
Did I miss the debut? Lots of nice mods lately, not sure if this was one of them.
A version of it is on the donation giveaway for this month. The marlin spike. I have 3 different versions though being made now from 440C.
The nice thing is it will work as a direct drop in replacement for a wood saw on any 91mm or 93mm SAK. So.. if someone wants a marlin spike user model, then can have one affordably. Right now marlin spike alox models are expensive. But, if you could buy a standard cellidor huntsman and swap the saw for marlin spike you can have a spike to actually use. :D I would have no problem selling the parts to people who wanted to do their own swap as well, as its just a matter of repinning one rivet.
-
Marlin spike? Part for sale? Sign me up for a couple when they arrive!

-
Awesome, I envision a Bushcrafter with a locking blade and marlin spike in my future!!
-
I hope this doesn't come across the wrong way, because I genuinely would like to know. What would you use a marlin spike for?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




