Evil's Quad Bit Card.....(impromptu one day project)
-
*Hey there, gang. This is one of my impromptu one day projects. From initial brainstorm to complete fabrication, I set out to create a companion primarily for my new STYLE EV1 but also something that will also serve some of my other tools. I rarely carry full bit cards these days, so, I set out to create a convenient way to carry the few bits that I feel I will need the most on any one particular day. Also, to be honest, the standard bit cards have proven to be unreliable to me. Over time most all bits required me to make a shim in order for them to not fall out on their own. I had a few criteria. First off, I wanted to create something that took up no more space than a large key. There were other ways I could have configured a bit card, however, the goal of this particular one was to be as flat as possible. For me the ideal number of bits to carry has been four. I also wanted to create it so that I could tell which bits were being carried at a glance for ease of selection. It also had to be able to withstand the rigors of being abused on a keychain. Crafted from delrin with a stainless steel insert for a lanyard or keyring. Giving it more abuse in a day than it will probably see over time, I have spun it around as fast as possible from a lanyard, thrown and tossed it around, dropped it multiple times. It has performed without fail thus far. Evil's Quad Bit Card.....
~ evil ~*
Evil's Quad Bit Card

Front, comparison to a key.....

Rear, comparison to a key.....

Closer view of stainless steel insert for lanyard/keyring.....

Here you can see the thickness. Only 1/16" thicker than a bit.....

Partially depressed tabs to show the release function. Bits lock into place once fully inserted.....

Rear view. Photo op with Style EV1.....

Front view. Bits installed. Photo op with Style EV1.....

Rear view. Size comparison.....

Front view. Bits installed. Size comparison.....

-
Wow, that's sweet! Great design as well. I bet you could sell those like hot cakes and I would be your first customer.

-
Nice and the right thickness for your Style

But I'd like a full bit thickness version

-
Is this just me,but everytime i see Evils mods i think why dont other mt manufacturers do this

-
OK, now that's AWESOME.

Could you maybe make them in larger numbers? Maybe as a MTO special? That would be dreamy.

-
:ahhh
So much thought and detail gone in to that little thing

-
Clever....

-
Brilliant once again

-
Great work once again!
How the heck did you cut those slots?? The only process I could think of is taking a skill saw blade and cutting it out by hand until they were perfect, quite a bit of skill!!!
-
@enki_ck said:
OK, now that's AWESOME.
Could you maybe make them in larger numbers? Maybe as a MTO special? That would be dreamy.

^^^
THISI'm at a loss as to why LM or other manufactures dont scoop these guys up quickly
. What's the harm in letting these guy loose in the building and seeing what they come up with
. -
I'm assuming it is a sandwich construction right? Fantastic as always sir!!!
-
OK, now that's AWESOME.

Could you maybe make them in larger numbers? Maybe as a MTO special? That would be dreamy.

^^^
THISI'm at a loss as to why LM or other manufactures dont scoop these guys up quickly
. What's the harm in letting these guy loose in the building and seeing what they come up with
.+1 SUPER!! :D
-
Just a quick question as I'm not familiar with delrin. How strong is it? Could the keyring attachment point be bit shaped to serve as a light duty bit holder?
-
@enki_ck said:
Just a quick question as I'm not familiar with delrin. How strong is it? Could the keyring attachment point be bit shaped to serve as a light duty bit holder?Do you mean the attachment point as a bit holder to be able to use the bits without a separate tool. If so that's a good idea.
-
@captain spaulding said:
Wow, that's sweet! Great design as well. I bet you could sell those like hot cakes and I would be your first customer.
Thank you, Captain. Maybe one day I'll get into mass producing items.....
@pingu said:
Nice and the right thickness for your Style
But I'd like a full bit thickness version
Thank you, pingu. While it is a different type of project, my Urban Driver project is based on standard 1/4" bits.....
@Zed said:
Is this just me,but everytime i see Evils mods i think why dont other mt manufacturers do this

That is my exact thought many times when I create things. They don't, so out of my own necessity, I create.....
@enki_ck said:
OK, now that's AWESOME.
Could you maybe make them in larger numbers? Maybe as a MTO special? That would be dreamy.

At current time, sadly the answer is no. Perhaps a few, at most, here and there. A major constant issue, is time. There are those here with jobs pending, waiting for my workload to lighten up as is. I am a one man operation with a small, humble archaic shop. Old school, to say the least. The only process that I outsource is heat treatment. To mass produce items such as this, I would no doubt have to outsource as well. That said, it is not something that I have not considered in regard to some other tool related items. Hope this helps.....
@Sparky415 said:
:ahhh
So much thought and detail gone in to that little thing
It really was an impromptu, spur of the moment-type project. It just works out that way sometimes. A lot of thought and detail, yes... though on certain jobs such as this one, it all happens on the fly as I go.....
@50ft-trad said:
Clever....
Thank you, 50ft.....
Thank you, SteveC.....
@NKlamerus said:
Great work once again!How the heck did you cut those slots?? The only process I could think of is taking a skill saw blade and cutting it out by hand until they were perfect, quite a bit of skill!!!
They were indeed cut by hand. I could have used a rotary saw blade or diamond blade, however, I used what was right at hand. Shear Evil has the ability to hold precision saw blades for jobs just like this. Most know by now that I work with plastics often. I made another tool to cater to my needs....
@Aloha007 said:
I'm at a loss as to why LM or other manufactures dont scoop these guys up quickly
. What's the harm in letting these guy loose in the building and seeing what they come up with
.If they would literally leave me be off in some far corner where I can work uninhibited like a mad scientist and not be bothered, I'm in..... ;)
@WWW said:
I'm assuming it is a sandwich construction right? Fantastic as always sir!!!Yes, it is indeed a sandwich construction. Some of the machining would not have been possible otherwise, mainly the release tab area as well at the uppermost square corners of the channels. Delrin machines well, however, it is tricky to bond.....
Thank you, sawman.....

@enki_ck said:
Just a quick question as I'm not familiar with delrin. How strong is it? Could the keyring attachment point be bit shaped to serve as a light duty bit holder?For a thermoplastic, it is quite strong. As mentioned, it machines well and has good structural stability qualities. That said, the walls would have to be of adequate thickness. Also, sharp corners are stress points, where it would likely crack the easiest. On Style EV1, the strength is due more to the metal frame, while the delrin insert positions and holds the bit. Style EV1 covers light-medium duty for me. My Urban Driver can handle heavy jobs without skipping a beat.....
@captain spaulding said:
Just a quick question as I'm not familiar with delrin. How strong is it? Could the keyring attachment point be bit shaped to serve as a light duty bit holder?
Do you mean the attachment point as a bit holder to be able to use the bits without a separate tool. If so that's a good idea.
Urban Driver is a self contained mini driver kit. I'll be posting on in the near future. I may also try other variations of bit holders I have floating in my head if the need arises. I have other ideas such as a more tubular type holder for 8 bits. At present time, four bits serve me fine.....
Good info there, WWW. They are one of my local suppliers as they are only 10 minutes away from me.....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login