Surge Mod Question
-
Hey guys,
I'm looking at the Leatherman Surge, but I was thinking of modding it slightly. Would the Philips driver in the Wingman/Sidekick fit into the Surge?
I also want to put the tiny screwdriver from the Wave into the Surge as well. I'm pretty confident that will fit.The tools I want to remove are the Small Flathead Screwdriver and the Awl.
Thanks for any tips.
-
Neither of those parts will fit. The Surge is a 4.5" tool and the others are 4". The parts aren't interchangeable.
If you want to put a philips and small bit driver in, you would need to get a SuperTool 300 and old model Surge for donor parts (or maybe see if someone has some to trade/sell).
I'm not sure if the philips will fit in without interfering with the plier head (you'll need to at least remove the plier rest to allow it to close).
The small bit driver from the old Surge is a straight drop in.
Good luck on your mod.
-
+1
Mine is from an ST300 and I got rid of the bit driver: /topic/57604
As for the tiny screwdriver, how about this?: /post/841761
-
Thanks guys.
I've got a bit more planning to do...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login